HAZARD AVOIDANCE

NAVIGATION MAP PAGE

TerrainandobstacledatacanbedisplayedontheNavigationMapPage. ObstaclesareshownontheNavigation Map Page at or below the map range that is configured.

Displaying Terrain Proximity data on the Navigation Map Page:

1)Press the MAP Softkey.

2)Press the TERRAIN Softkey to display the terrain and obstacle data on the Navigation Map Page.

Displaying obstacle information:

1)Press the MAP Softkey.

2)Press the TERRAIN Softkey to display the terrain and obstacle data on the Navigation Map Page.

3)Press the Joystick and move the panning arrow over the obstacle icon.

HAZARD AVOIDANCE

SETTING UP TERRAIN PROXIMITY ON THE NAVIGATION MAP PAGE

Use the Map Setup Window (Figure 6-46) to customize the display of obstacle and terrain data on the Navigation Map Page. Data displays only if it is selected.

Customizing terrain and obstacle display on the Navigation Map Page:

1)On the Navigation Map Page, press the MENU Key.

2)While the ‘Map Setup’ selection is highlighted on the Page Menu, press the ENT Key.

3)Turn the small FMS Knob to display the group selection window. To select the ‘Map’ group, turn the FMS Knob and press the ENT Key.

4)While the Map Setup Menu is displayed, turn the large FMS Knob to highlight and move between the selections.

5)When an item is highlighted, turn the small FMS Knob to select the desired option and press the ENT Key.

Map Zoom Range at

Which Data Begins to

Display

Figure 6-46 Map Setup Window

Table 6-7 shows the options for displaying terrain and obstacle data on the Navigation Map only. These options do not apply to other maps.

Table 6-7 Obstacle and Terrain Data on the Navigation Map Page

Refer to Table 6-6 for the altitude associated with obstacle and terrain colors.