Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
posibnik англійська.doc
Скачиваний:
23
Добавлен:
16.11.2019
Размер:
3.59 Mб
Скачать

Text 4. From the History of Architectural Structures

Architecture had its beginning when early humans first fashioned caves or lean-to shelters for their families. Architectural draft­ing and design began when these people first drew the outline of a shelter in the sand or dirt and planned the use of existing materials. As structures became more complex, the need for more complete drawings became necessary. But these architec­tural plans are far below today's standards. Their drawings are crude, and their measure­ments are not accurate.

An architect uses the knowledge gained from past centuries when designing a build­ing today. The history of architectural design is directly related to progress in other areas of learning. For example, architecture has relied heavily upon the advancements of science and mathematics. From these advancements came new building materials and building methods. New engineering developments and new building materials have brought about more changes in architectural design in the last 30 years than had occurred in all the ear­lier history of architecture. Yet, many of the basic principles of modern architecture, such as bearing-wall construction and skeleton- frame construction, have been known for cen­turies. Even today, architectural structures are divided into two basic types, the bearing- wall and the skeleton-frame.

Bearing-Wall Construction. Bearing walls are solid and support them­selves and the roof of a structure. Most early architecture, used the bear­ing wall for support. In fact, one of the first major problems in architectural drafting and design involved the bearing wall. The prob­lem was how to provide openings in a sup­porting wall without sacrificing the needed support. One of the first solutions to this prob­lem was the development of the post-and-lintel. In this type of construction, posts large enough to support the lintel (upper hori­zontal beam), wall, and roof above are used.

The ancient Greeks used post-and-lintel construction to erect many of their beautiful buildings. Most ancient people used stone as their primary building material. The great weight of the stone limited the applica­tion of post-and-lintel construction. Further­more, stone post-and-lintel construction could not support wide openings. Therefore, many posts (columns) were placed close together, to provide the needed support. The Greeks and Romans de­veloped many styles of columns and gave names to them. The various styles of column designs were known as orders. The orders of architecture developed by the Greeks are known as the Doric, the Ionic, and the Corinthian. Later, the Romans developed the Composite and the Tuscan orders.

Since the Greek climate was well suited to open-air construction, the Greeks used the post-and-lintel technique to great advantage. The Parthenon is a classic example of Greek use of the post-and-lintel.

Oriental architects also made effective use of the post-and-lintel. They were able to construct buildings with larger open­ings under the lintel because they used lighter materials, such as wood. The use of lighter materials resulted in the development of a style of architecture that was very light and graceful. The Oriental post-and-lintel designs were also used extensively for gates and en­trances.

The Arch. The Romans began a new trend in the design of wall openings when they developed the arch. The arch is different from the post- and-lintel because it can span (extend over) greater areas without support. It is easier to erect because it is made from many smaller, lighter pieces of stone. The principle of the arch is that each stone is supported by leaning on the keystone in the center. The keystone is shaped like a wedge and locks the other stones in place.

The Vault. The simple arch led to the development of the vault. The vault is simply a series of arches that forms a continuous covering. This development allowed the use of the arch as a passageway rather than as just an open­ing in a wall. The cross vault is the intersec­tion of two barrel vaults. The barrel vault and the cross vault were popular Roman construc­tion devices.

The Dome. The dome, is a further refine­ment of the arch. The dome is made of arches so arranged that the bases make a circle and the tops meet in the middle of the ceiling. The Romans felt that the dome gave a feeling of power. Therefore, they used domes often in religious and governmental structures.

The Gothic Arch. Gothic architecture originated in France. It spread throughout western Europe between 1160 and 1530. Another variation of the arch, the pointed arch, was developed in Gothic architecture. The pointed arch (Gothic arch) became very popular in Gothic cathedrals because it created a sense of reaching and as­piring by its emphasis on vertical lines. Con­struction of the pointed arch posed the same problem as did conventional arches, that of spreading at the bottom.

To support the arch at the bottom, a new device known as a buttress was developed. Buttresses were gradually moved up the walls and resulted in the development of the flying buttress.

Text 5. New Construction Methods

The development of new materials is usu­ally not possible without the development of new construction methods. For example, large glass panels could not have been used in the eighteenth century even if they had been available, because no large-span lintel-support system had been developed. Only when both new materials and new methods exist is the architect free to design with com­plete flexibility.

Present-day structures are usually a com­bination of old and new. In a modern build­ing, examples of the old post-and-lintel method may be used together with skeleton-frame, curtain-wall, or cantilevered construc­tion.

Skeleton Frame. One of the first methods developed to employ modern materials makes use of the skeleton frame. This kind of construction has an open frame to which a wall covering is at­tached. The frame provides the primary sup­port, and the covering provides the needed shelter. The skeleton frame became popular with the development of framing materials and wall coverings that are light, strong, and usable in a variety of ways. The skeleton frame is now commonly used in family dwell­ings, and in commercial buildings. When steel is used for the skeleton, the skeleton frame is known as steel-cage construction.

The use of the skeleton frame, as opposed to bearing-wall construction, has given archi­tects new opportunities. They can now design a structure without direct vertical-line out­side base support. In this new type of con­struction, called cantilever, the loads are sup­ported at only one end. Steel is well suited to cantilever construction because loaded steel beams, supported at only one end, can be ex­tended farther without sagging than can any other material.

Since loads in steel-cage construction are not supported by the outside wall, curtain walls are possible. In this type of building, known as curtain-wall construction, a steel cage is erected, forming the shape of the building. The curtain wall, or skin, is added last. This curtain has no structural relation­ship to the stability of the building; it acts only as a protection from the weather. There­fore, the curtain wall can be made of materi­als with little or no structural value, such as glass, sheet metal, or plastic.

Shapes. For centuries, architectural development has been restricted by the use and overuse of the square and the cube (right angles) as the basis for most structures. Architects are now using other shapes such as the, octagon, pyramid, pentagon, circle, and sphere. This has come about with the development of materials that are stronger, lighter, and have a variety of uses. New construction methods also enable archi­tects to design buildings that are completely functional (able to fulfill all needs) without reference to any basic geometric form. Many forms are now possible, and even the basic shapes of floor plans can be drawn to meet a variety of needs.

Sizes. New technology uses knowledge gained from advances in science. One of the most striking results has been the use of new mate­rials and new methods to design and build structures of size greater than ever before. The Sears Tower in Chicago is now the tallest building in the world. But as tech­nology develops even more, buildings can in­crease to sizes previously thought impossible. Frank Lloyd Wright once proposed a mile- high skyscraper. Ten such structures would house the working office staff of all New York City. Six would suffice for Chicago. The pro­posed skyscraper would tower far above the largest structures of today.

Who can say what will be possible? The idea of building a geodesic dome over central Manhattan, in New York City, certainly seems impossible at the moment. But remember that landing humans on the moon, and flights to and landings on distant planets, also seemed impossible not many years ago.

Location. Today, architects not only design build­ings of enormous size but can also choose lo­cations for buildings that were unthought of years ago. Further advances in trans­portation and architectural engineering will make even more difficult locations not only possible but workable.

Соседние файлы в предмете [НЕСОРТИРОВАННОЕ]