Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
premierepro_cs5_help.pdf
Скачиваний:
17
Добавлен:
13.02.2015
Размер:
22.6 Mб
Скачать

USING ADOBE PREMIERE PRO

45

Workflows and setup

AVCHD

AVC-I

You can also preview video on a high-definition TV monitor, if your computer has one of the following:

a high-definition capture card,

a display card with component, SDI or HDMI outputs.

1Connect the card reader, disk drive, or camcorder to the computer, typically with a USB 2.0 cable. Check the manual for your device for details.

2Connect the output of the computer sound card to computer speakers or audio amplifier.

3Connect the video outputs from the capture card, breakout box, or display card to the TV monitor using component, SDI, or HDMI cables.

Set up an S-Video or composite system

B

D

F

 

 

C

 

 

A

 

G

I

E H

S-Video/composite setup

A. Computer and computer monitor B. Ports and connectors for FireWire, USB 2.0 C. A/D converter D. Jacks and plugs for RCA composite video, S-Video (y/c) E. RS 232/422 port and connector F. RCA jacks and plugs for L (white) and R (red) audio G. Analog camcorder, analog VTR H. RCA jacks and plugs for L (white) audio, R (red) audio, and composite video (yellow); jack and plug for S-Video (y/c) I. Television monitor

With this setup, you can capture audio and video from an analog camcorder or VTR. You can monitor the video signal on a TV monitor while editing. Finally, you can export any sequence back to the camcorder or VTR.

To convert the analog source signal to a digital file the computer can read, this setup requires an analog/digital (A/D) converter, or digitizer. You can use any of the following to digitize the video signal:

an internal digitizer, installed in the computer,

an external digitizer, connected to the computer,

a digital camcorder or VTR capable of digitizing an incoming analog signal.

1Connect the analog camcorder or VTR to the digitizer using S-Video or RCA video cables. Run video cables from the video outputs of the computer or its interface to the video inputs of the device. Also run video cables from the video outputs of the device to the video inputs of the computer or its interface.

2Connect the analog camcorder or VTR to the digitizer using XLR or RCA audio cables. Run audio cables from the audio outputs of the digitizer to the audio inputs of the device. Also run audio cables from the audio outputs of the device to the audio inputs of the digitizer.

Last updated 1/16/2012

Соседние файлы в предмете [НЕСОРТИРОВАННОЕ]