Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
UNITS.doc
Скачиваний:
16
Добавлен:
10.11.2019
Размер:
16.52 Mб
Скачать

Fig. 37. Continental, shoreline and marine sedimentary environments

Classification and chemical differential of sedimentary rocks

Sediments are described on the basis of their grain size, chemical and mineralogical composition and modes of accumulation. Classification by grain size is most readily applied to clastic sediments because particle size is related to the origin of the rock.Among the clastic rocks, we recognize four main grain-size groups:

  1. conglomerates containing particles greater than 2 millimeters in diameter;

  2. sandstones with grains of 1/16 to 2 millimeters size range;

  3. siltstones contain grains between 1/256 to 1/16 millimeter in diameter;

  4. claystones carry particles finer than 1/256 millimeter in diameter.

Where planar fractures or parts along bedding surfaces are developed, claystones and fine-grained siltstones collectively are termed shale. If fractures parallel to bedding layering are not present in a deposit containing both clay and silt, the massive rock is termed as mudstone.

Limestones produced principally through the accumulation of calcareous fossil materials include coquina, chalk and reef limestones. The low-temperature process where source rock is converted to secondary accumulations of contrasting compositions is termed sedimentary differentiation.Weathering of preexisting rocks at or near the Earth’s surface results in the solution of readily dissolved constituents and in the hydration and oxidation of others. Materials transported as clastic grains are separated on the basis of mechanical properties; relatively soft minerals possessing good cleavages are more rapidly and more finely abraded than fragments lacking fractures and perfect cleavage. Therefore, grain size and mineralogical composition are related in sediment.

The average compositions of igneous source rock of the continental crust and of typical sedimentary lithologies, sandstone, shale and limestone are markedly different. The average bulk composition of continental sedimentary rock is approximately 60 to 80% shale, 15 to 20% sandstone and conglomerate and approximately 10 to 15% carbonate.

(Barret E , Hunt A. And Milner B.” Earth and Atmosphere”, 1993, Longman)

      1. Read the following text and fill in the missing words.

The volume of ____________ _________ (1) is about 10%. However, sedimentary units have an economic importance and include mineral ores such as coal, _______ (2), and natural gas. Sedimentary rocks are the ____________ (3) of detritus or ________ (4) sediments. The formation of sedimentary rocks includes the following processes: _______ (5), transportation, _________ (6) and lithification. Lithification is a combination of ______ (7) and ________ (8). The nature of sediment depends on several factors: ________ (9), attendant weathering, __________________ (10) and ____________ (11) of transportation. Rapid accumulation of ill-sorted clastics results in _________ (12) sands, while slow build-up of fine-grained matter produces ______ (13) sediments. There are two basic types of sediments: ______ (14) and ____________ (15). ____________ (16) is the reaction among original chemically dissimilar fragments that produces new minerals.

Terrestrial fine-bedded sedimentary rocks coarse marine deposition source weathering diagenesis compaction length petroleum mode chemical cementation accumulations

Соседние файлы в предмете [НЕСОРТИРОВАННОЕ]