Configuration
6.1.10 Service page Storage
On this service page, Power Panel memory can be shared to allow access from the network. The following memory areas can be shared for network access:
•Connected USB storage media
•Internal user memory
Sharing takes place using the Common Internet File System (CIFS) protocol. In this case, the Power Panel functions as a server and makes resources (a memory area) available to a client in the network using an access mechanism. CIFS uses a user, password and memory for authentication.
The client will require the following information to access the memory area shared on the Power Panel:
CIFS user |
The CIFS user cannot be configured. "ppt80-user" must always be used as the CIFS user. |
||
|
|
Note: The username is device-specific. This is important to note if a device is replaced by a Power |
|
|
|
Panel from another family(e.g. T50 ► T80). |
|
|
|
|
|
CIFS password |
The password configured on this service page is used. |
||
CIFS memory location |
The following names can be used to specify the memory location: |
||
|
Name |
Description |
|
|
usbshare |
USB storage medium connected to USB interface IF3. |
|
|
usbshare2 |
USB storage medium connected to USB interface IF4. |
|
|
usershare |
Internal user memory (flash) on the Power Panel. |
|
The USB storage medium must be formatted using the FAT32 file system.
The following figure shows the default settings for service page Storage:
Startup |
Allow access to USB memory via network |
|
|
|
|
Network |
|
|
|
|
|
Time |
Allow access to user memory via network |
|
Screen |
|
|
|
Password for network access |
|
Audio |
●●●●●●●● |
|
|
Max. 100 characters |
|
Gesture |
Show password |
|
|
|
|
VNC |
|
|
|
|
|
|
|
|
Web |
Encrypt password |
|
|
|
|
Storage |
Save storage password in encrypted form |
|
Update |
|
|
|
|
|
Backup & Reset |
|
|
|
|
|
Allow access to USB memory via network
Default setting: Disabled
If this option is enabled, access to the connected USB storage medium will be shared on the network.
Allow access to user memory via network
Default setting: Disabled
If this option is enabled, access to the internal user memory will be shared on the network.
Password for network access
Default setting: EMPTY (no password entered) Input range: Max. 100 characters
The CIFS password for network sharing is configured here. This password applies both for sharing the USB storage medium as well as internal user memory.
The password is stored on the device in configuration file PPT80Config.xml .
56 |
Power Panel T80 User's manual V1.01 |
Configuration
Show password
Default setting: Disabled
Enabled |
The password is displayed in the input field as plain text. |
Disabled |
The password is hidden in the input field by placeholder characters (●●●●●●). |
Encrypt password
Default setting: Disabled
Enabled |
The password is stored on the device in encrypted form. |
Disabled |
The password is stored on the device as plain text. |
Power Panel T80 User's manual V1.01 |
57 |