- •Preface:
- •1 Machine specification
- •Installation and transportation
- •9 Nozzle leveling process
- •10 Mold exchange process:
- •1 1 Confirm mold thickness method
- •4 Electric control box panel
- •5 The description of each switch function 4-5-1 Injection resistance scale
- •5 0 0 M 0 0 -6 Safety door magnet spring switch
- •Vacuum solenoid valve
- •5. The description of operating menu screen
- •The above screen image is only for reference
- •The above screen image is only for reference
- •The above screen image is only for reference
- •Injector I Speed
- •Injector 1 Pressure
- •The above screen image is only for reference
- •The above screen image is only for reference
- •4 Inj.-l temp, setting -1
- •The above screen image is only for reference
The above screen image is only for reference
At the above screen press “Injector 2 speed” to display the ’’Injection pressure/speed-injector 2” screen °
Injection volume setting: The machine is 5 sections injection machine. Each section injection volume by oneself or automatic average share by computer.
If each section injection volume must set by oneself, check the small box which show at above figure and start from the last section (No. 5 section) to the front section setting the injection volume. If only set one of the section, the other sections will average share by computer.
Injection speed setting: According to the injection volume the machine is divided into 5 sections injection speed. Each section injection speed can set by oneself. Each section value indicates hydraulic oil flow rate (unit: L/min). The default value is 30~40. The value is too large means the injection speed is too fast.
Injector 2 No.1 station left mold cannot set and it is also for display the function.3-1 Injector 2 injection Pressure
16:14:10 |
|
10/28/2009 |
|
Seg1~4 Inj. Pressure St. Left 1 |
kg/cm2 seg 5 inj. Pressure kg/cm2 Right Left Right |
||
i o j HE i o |
|||
2 JiH |
I 0 I 0 I 0 |
||
3 | 0 |
! 0 I 0 I 0 |
||
4 | 0 |
i ' 0 ; |
t 0 1 0 |
|
5 | 0 |
I 0 |
1 0 1 1 0 |
|
6 j o J m |
I 0 |
1 o 9t 1 o |
|
7 r o j§?, |
I 0 I 0 I 0 |
||
8 | 0 |
I 0 |
o o |
|
jfolfc SssSSL^ lllllllll? . ... |
|||
■53 5 |
I o I o Hli ii | o |
||
|
i>— - r : : a ~a |
injector
l
_Speed
Injector
2 Injector 2
Main Pressure I Monitor I PageInjector I Speed
Injector 1 Pressure
The above screen image is only for reference
At the above screen press “Injector 2 Pressure” icon display the “Injector 2 Pressure screen.
It can set No. 1-4 and No. 5 section left or right mold injection pressure value.
Injector 2 No. 1 station left mold cannot set and it is also for display the function
.3-2 Injector 2 monitor
16:14:43 10/28/2009
|
|
|
|
|
|
|
BhI |
|
Injector 1 |
|
|
Injector 2 |
|
||
St |
Inj. Time (sec) Inj. Speed (lpm) Inj. Vol. (g) Inj |
Time |
(sec)lnj |
Speed (lpm) |
Inj. Vol. (g) |
||
1 |
|
|
|
0.0 |
|
0.0 |
0.0 |
2 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
3 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
4 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
5 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
6 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
7 |
0.0 |
0.0 |
o d |
0.0 |
|
0.0 |
0.0 |
8 |
0.0 |
0.0 |
0.0 |
0.0 |
|
0.0 |
0.0 |
|
Current stroke : |
0.0 |
;mm; |
/, ; Kpf SCI = ISI Segment Remaining |
(g) |
||
|
Q.Ssec Rate : |
0.0 |
(g/sec) No. 2 |
No. 3 |
No. 4 No. |
5 stop |
|
|
Total feeding : |
0.0 |
(9) 0.0 |
0.0 |
0.0 0.0 |
0,0 |
|
injector l I injector 1 |
I Injector 1 |
injector 2 |
Injector 2 |
Injector 2 I |
Main |
||
Sneed j Pressure |
I Monitor |
I Speed |
Pressure I |
Monitor I |
Paae | |