- •Preface:
- •1 Machine specification
- •Installation and transportation
- •9 Nozzle leveling process
- •10 Mold exchange process:
- •1 1 Confirm mold thickness method
- •4 Electric control box panel
- •5 The description of each switch function 4-5-1 Injection resistance scale
- •5 0 0 M 0 0 -6 Safety door magnet spring switch
- •Vacuum solenoid valve
- •5. The description of operating menu screen
- •The above screen image is only for reference
- •The above screen image is only for reference
- •The above screen image is only for reference
- •Injector I Speed
- •Injector 1 Pressure
- •The above screen image is only for reference
- •The above screen image is only for reference
- •4 Inj.-l temp, setting -1
- •The above screen image is only for reference
The above screen image is only for reference
At screen press “Injector monitor-injector 1” to display the above screen.
Injection time: Record the injection start to stop time.
Injection speed: The injection start to stop average injection speed value, e.g.: Feed amount is 130g, injection time is lOsec
Injection speed=feed amount -injection time . =130 (g)-10 (sec)
=13g/sec
The default injection speed is ll~14g/sec. If the material flows rate too bad the injection speed is setting too slow.
Segment remaining: Displays 5 sections exchange points.
Current stroke: Display screw current position > when the injection quantity is 0, the current stroke display 5.0mm °
Injector 1 last station right mold cannot set and it is also for display the function.3 Injector 2 Speed
16:13:42 |
1 £' |
|
s |
|
|
10/28/2009 |
|||||||
|
lnj-2 Injection Volmue |
Setting |
g |
unlock] |
■ffPKlI |
||||||||
Seg2 |
Seg3 |
iiiliBlffliiii |
<T |
Seg4 |
|
Seg5 |
|
||||||
c |
) 1 0,0 |
O L |
0.0 1 |
c; |
1 9-0 |
o |
I 0,0 |
||||||
|
Left Mold |
Injection S |
peed ! /rnin |
Right Mold |
|||||||||
ST. No.1 |
No.2 No,3 |
No.4 |
No.5 |
No.1 |
No.2 |
■ ■■ . : . • r |
|||||||
1 |
|
|
|
1 |
3 |
1 0; |
i o n |
J I 0 |
|||||
1 CM |
ro.'ru |
1 c |
I 0 |
r |
Til |
:l 0 " |
I! r v |
||||||
3 : |
10 -to |
) 0 |
J 0 |
r |
n % |
J oil! |
1 0 | 0 |0 |
||||||
4 [ 0 |
1 0 10 |
1 o |
r |
|
1 U-: |
■Q. ip: |
|||||||
5 |
r o r o - |
1 o |
r— |
r |
T~ _ |
I 0 j |
1 0 1 .0 | 0 |
||||||
s [ 0 10 I 0 |
! o |
o |
n |
g— | |
i 0 |
1 0 | 0 | 0 |
|||||||
7 |
! o rcr~ |
1 0 I |
l on |
r |
5 ^ |
1 0 |
i o i o ru“ |
||||||
a I o |
i o i i o |
1 0 |
FoT, |
n |
w |
I o j q |
|||||||
|
'• ' . M : at -tlr./fi |
1 |
If: • £ |
|
|
|
|
. |
|||||
fast , ( |
: 1 0 J |
Oi L |
r |
0 |
1 0 : |
1 0l[‘1 0 ! L0 |
|||||||
s Speed | |
Injector 1 I Injector 1 ] Pressure 1 Monitor. 1 |
injector 2 Speed |
Injector 2 j |
Injector 2 Monitor |
Main 1 Paqe J |
||||||||