SECTION 8: FLIGHT PLANNING

ThefollowingdiscussionspertaintotheMultiFunction Display, unless otherwise indicated.

8.1USER DEFINED WAYPOINTS

Figure 8-1 User WPT Information Page

Select the User WPT Information Page

1)Turn the large FMS Knob to select the ‘WPT’ page group.

2)Turn the small FMS Knob to select the fifth rectangular page icon.

Create a New User Waypoint

1)With the UserWaypoint Information Page displayed, press the NEW Softkey. A waypoint is created at the current aircraft position.

2)Turn the small FMS Knob to enter first character of the waypoint name.

3)Turn the large FMS Knob to move the cursor to the next character field.

SECTION 8 – FLIGHT PLANNING

4)Repeat steps 2 and 3 until the desired name is entered.

5)Press the ENT Key.

6)Press the ENTKey again to accept the new waypoint identifier.

7)The cursor is now in the ‘REFERENCEWAYPOINTS’ field. If desired, the waypoint can be defined by a reference waypoint. Turn the FMS Knobs to enter the position coordinates or the radial and distance from the reference waypoint.

8)Press the FMS Knob to remove the flashing cursor.

Modify a User Waypoint

1)With the UserWaypoint Information Page displayed, press the FMS Knob to activate the cursor.

2)Turn the large FMS Knob to move the cursor to the desired field and turn the small FMS Knob to make changes.

3)Press the ENT Key to accept the changes.

4)Press the FMS Knob to remove the flashing cursor.

Delete a User Waypoint

1)Select the User Waypoint Information Page and press the MENU Key to display the User Waypoint Information Page Options or press the DELETE Softkey.

2)Turn the large FMS Knob to select ‘Delete User Waypoint’ and press the ENT Key. The message ‘Would you like to delete the user waypoint’ is displayed. With ‘YES’ highlighted, press the ENT Key.