α Series Simple Application Controllers |
Remote Maintenance 11 |
|
|
11.4.3Set the GSM Modem Initialization
Set it according to the following procedures when setting the GSM modem on the α2 series side. This setting is for α2 series. When using α series (Model: AL-**M*-*), this setting does not appear.
To set the GSM modem initialization on the α series side:
1)Click “Option” in the Menu bar, and choose “GSM and Serial Communication...”.
2) Click the “GSM” (radio button).
11-7
α Series Simple Application Controllers |
Remote Maintenance 11 |
|
|
3)Using other modems, choose “New” on the pull down menu.
4)Click “Initialize Modem”.
This initialize command already has a default setting.
However, it is possible to add AT commands. Further information about AT commands can be found in the GSM modem manufacturer’s manual.
5)Set “Power On Delay” to 0 ~ 10s.
6)Click “OK”
7)Set “Pin Code” for using GSM modem on the α2 series side.
8)Click “Remote Access” to access using AL-PCS/WIN-E.
9)Set “Data Bit, Parity, Stop Bit and Baud Rate” into the Data Format. When using the Siemens M20T, do not change default setting.
Table 11.7:Default Setting of Data Format
|
|
|
|
|
Items |
Default Setting |
|
|
|
|
|
|
Data Bit |
8 bit |
|
|
|
|
|
|
Parity |
None (None parity) |
|
|
|
|
|
|
Stop Bit |
1 bit |
|
|
|
|
|
|
Baud Rate |
9600bps |
|
|
|
|
|
|
|
|
|
10)Click “OK” to complete this setting.
11-8