Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
G1000 / G1000_CessnaNavIII_CockpitReferenceGuide_SystemSoftwareVersion0563.00orlater_.pdf
Скачиваний:
121
Добавлен:
18.04.2015
Размер:
7.21 Mб
Скачать

Change the viewing mode between 360˚ and 120˚:

1)Select the Stormscope Page.

2)Press the VIEW Softkey. The 360 andARC Softkeys are displayed. Press the 360 Softkey to display a 360˚ viewing area or press the ARC Softkey to display a 120˚ viewing area.

Press the CLEAR Softkey to remove all Stormscope lightning data from the display.

10.3 XM WEATHER (SERVICE OPTIONAL)

WARNING: XM Weather is not intended to be used for hazardous weather penetration. Weather information provided by XM Radio Service is approved only for weather avoidance, not penetration.

1)From the Navigation Map Page, press the MAP Softkey.

2)Press the NEXRAD or XM LTNG Softkey to display the desired weather. Press the applicable softkey again to remove weather data from the Navigation Map Page.

Figure 10-7 Navigation Map Page Displaying NEXRAD Weather

SECTION 10 – HAZARD

AVOIDANCE

NOTE:WeatherisnotdisplayedontheNavigation Map Page at zoom levels less than 10 nm.

Displaying METAR and TAF information on the Airport Information Page

1)Turn the large FMS Knob to select the WPT Page Group.

2)Turn the small FMS Knob to select the Airport Information Page.

3)Press the WX Softkey to display METAR andTAF text (METAR and TAF information is updated every 12 minutes).

METAR

Text

TAF

Text

WX

Softkey

Figure 10-8 METAR and TAF Text Displayed on the

Airport (Weather) Information Page

Garmin G1000 Cockpit Reference Guide for the Cessna Nav III

10-3