FRAME 15-25

Sidestand

Sidestand Removal

•Raise the rear wheel off the ground with the stand [A].

•Remove:

Sidestand Switch Bolt [A] Sidestand Switch [B]

•Remove: Spring [A]

Sidestand Nut [B] Sidestand Bolt [C] Sidestand [D]

Sidestand Installation

•Apply grease to the sliding area [A] of the sidestand [B].

•Tighten the sidestand bolt [C], and then lock it with the nut [D].

Torque - Sidestand Bolt: 44 N·m (4.5 kgf·m, 32 ft·lb)

•Hook the spring [E] so that the long spring end faces upward.

○Install the spring hook direction as shown in the figure.

•Install the sidestand switch [F].

•Apply a non-permanent locking agent to the threads of the sidestand switch bolt [G], and tighten it.

Torque - Sidestand Switch Bolt: 8.8 N·m (0.90 kgf·m, 78 in·lb)