FRAME 15-9

Fairings

Lower Fairing Removal

•Remove:

Lower Inner Fairing (see Lower Inner Fairing Removal) Quick Rivet [A]

Bolts [B]

○Pull up the core by the flat-head screwdriver, and then remove the quick rivet.

•Clear the hook portions [C] from the slots and remove the lower fairing [D].

•Remove the right lower fairing in the same way.

Lower Fairing Installation

•Installation is the reverse of removal, note the following. ○Check that the pads [A] are in place on the lower fairing.

Left Lower Fairing [B]

Right Lower Fairing [C]

○Insert the hook portions [A] into the slots [B].

Lower Inner Fairing Removal

•Remove:

Quick Rivets [A] Bolts [B]

•Clear the projection [C] from the hole and remove the lower inner fairing [D].

15-10 FRAME

Fairings

Lower Inner Fairing Installation

•Installation is the reverse of removal, note the following. ○Insert the projection [A] into the hole [B].

Upper Fairing Assembly Removal

•Remove:

Lower Fairings (see Lower Fairing Removal)

Upper Inner Fairings (see Upper Inner Fairing Removal) Windshield (see Windshield Removal)

Quick Rivet [A]

•Disconnect:

Front Turn Signal Light Lead Connector [A] Headlight Connector [B]

City Light Lead Connector [C]

Alternator and Regulator/Rectifier Lead Connectors [D]

•Remove:

Front Right Turn Signal Light Lead Connector [A] Headlight Connector [B]

City Light Lead Connector [C] Canister (CAL, SEA and TH Models)

•Remove: Bolts [A]

Rear View Mirror [B] Bolt [C]

FRAME 15-11

Fairings

•Remove: Bolts [A]

Rear View Mirror [B] Bolt [C]

•Remove the bolts [A].

•Clear the projections [B] from the holes and remove the upper fairing assembly [C].

Upper Fairing Assembly Installation

•Installation is the reverse of removal, note the following. ○Run the hoses, leads and harness correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter).

○Insert the hole [A] onto the projection [B].

○Insert the projections [A] into the holes [B].

Center Fairing Removal

•Remove:

Upper Fairing Assembly (see Upper Fairing Assembly Removal)

Center Inner Fairing (see Center Inner Fairing Removal) Headlight (see Headlight Removal/Installation in the Electrical System chapter)

Screws [A]

•Clear the hook portions [B] from the slots and remove the center fairing.

•Remove the right center fairing in the same way.

15-12 FRAME

Fairings

Center Fairing Installation

•Installation is the reverse of removal, note the following. ○Check that the pads [A] are in place on the center fairing.

Left Center Fairing [B]

Right Center Fairing [C]

○Insert the hook portions [A] into the slots [B].

Upper Fairing Removal

•Remove:

Center Fairings (see Center Fairing Removal)

Upper Center Fairing (see Upper Center Fairing Removal)

Upper Fairing Installation

•Installation is the reverse of removal.

Upper Center Fairing Removal

•Remove:

Upper Fairing Assembly (see Upper Fairing Assembly Removal)

Center Inner Fairing (see Center Inner Fairing Removal) Headlight (see Headlight Removal/Installation in the Electrical System chapter)

Screws [A]

•Clear the slots [B] from the hook portions and remove the upper center fairing.