SECTION 9 – PROCEDURES
6.A second window is displayed listing available transitions for the arrival. Turn either FMS knob to highlight the desired transition waypoint and press the ENT key.
Figure 9-4 Select Arrival Transition
7.A third window is displayed listing the available runways. Turn either FMS knob to select the desired runway and press the ENT key.
Figure 9-5 Select Arrival Runway
8.With ‘LOAD?’ highlighted, press the ENT key. If a flight plan is active, the selected arrival procedure is inserted after the destination airport and becomes part of the active flight plan. If no flight plan is active when the arrival is loaded,the arrival procedure will become the active flight plan.
9.2APPROACHES
Load and/or Activate an Approach Procedure
1.With the Navigation Map Page displayed,press the FPL key.
2.Press the LD APR softkey. If a flight plan is active,the destination airport will be displayed as the default. A list of available approaches is also displayed.
3.If no flight plan is active,use the FMS knobs to enter the identifier of the desired airport. Press the ENT key.
4.Turn the large FMS knob to highlight the Approach field. Turn the small FMS knob to display a list of available approaches.
Figure 9-6 Selecting an Approach Procedure
5.Turn either FMS knob to highlight the desired approach. Press the ENT key.
6.The cursor will move to the TRANSITIONS field. Turn the large FMS knob to highlight the desired transition waypoint and press the ENT key. (The“Vectors”option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course.)
9-2 |
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III |
SECTION 9 – PROCEDURES
Figure 9-7 Selecting an Approach Transition
7.Turn the largeFMSknob to highlight‘Activate?’ and press the ENT key to activate the approach. Selecting‘Load?’ will add the procedure to the flight plan without immediately using it for navigation guidance.
Activate An Approach in the Active Flight Plan
1.With the Navigation Map Page displayed,press the PROC key.
2.Turn the largeFMS knob to highlight‘ACTIVATE APPROACH’.
3.Press the ENT key. The approach procedure is now active.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III |
9-3 |
SECTION 9 – PROCEDURES
This page intentionally left blank.
9-4 |
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III |