SECTION 9: PROCEDURES

9.1ARRIVALS AND DEPARTURES

Load and Activate a Departure Procedure

1.With the Navigation Map Page displayed,press the FPL key.

2.Press the LDDP softkey. If a flight plan is active, the departure airport will be displayed as the default. A list of available departures is also displayed.

3.If no flight plan is active,use the FMS knobs to enter the identifier of the desired airport. Press the ENT key.

4.Turn the largeFMS knob to highlight the Departure field. Turn the small FMS knob to display a list of available departures.

5.Turn either FMS knob to select the desired departure and press the ENT key.

Figure 9-1 Select Departure

6.A list of runways may be displayed for the departure. Turn either FMS knob to select the desired runway and press the ENT key.

7.A list of available transitions is displayed for the departure. Turn either FMS knob to highlight the desired transition waypoint and press the ENT key.

SECTION 9 – PROCEDURES

Figure 9-2 Select Departure Transition

8.With ‘LOAD?’ highlighted, press the ENT key. The departure will be active when the flight plan is active.

Load and Activate An Arrival Procedure

1.With the Navigation Map Page displayed,press the FPL key.

2.Press the LD STAR softkey. If a flight plan is active,the destination airport will be displayed as the default. A list of available arrivals is also displayed.

3.If no flight plan is active,use the FMS knobs to enter the identifier of the desired airport. Press the ENT key.

4.Turn the largeFMS knob to highlight theArrival field. Turn the small FMS knob to display a list of available arrivals.

5.Turn either FMS knob to select the desired arrival and press the ENT key.

Figure 9-3 Select Arrival