Хорошев / ИЛП_материал_маг_02.15 / DEF STAN 00-60 / Issue 4 / Part 0 - Appendix F to Annex C - Data element dictionary
.pdfDEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
The distance from the outside of the outermost front tyre to the outside of the opposite front outermost tyre.
c. Rear Inside (RI) |
4 N R 1 |
The distance from the inside of the innermost rear tyre to the inside of the opposite rear innermost tyre.
d. |
Rear Outside (RO) |
4 |
N |
R |
1 |
The distance from the outside of the outermost rear tyre to the outside of the opposite rear outermost tyre.
030 BASIS OF ISSUE |
15 X - |
- |
This field is composed of the following four sub-fields:
a. Quantity Authorized (QTY-AUTH) |
5 N R - |
The quantity of an item (special tool), authorized for the end item density spread or for the unit level specified.
b. End Item |
8 |
X L - |
The density spread of the end items.
c. Level |
l |
A F |
- |
A code which indicates the unit level authorized for the QTY-AUTH.
QTY-AUTH per lettered company |
|
A |
QTY-AUTH per battalion (BN) headquarters (HQ) |
|
B |
when BN has a service (SVC) company |
|
|
QTY-AUTH per HQ of units above BN level |
|
C |
QTY-AUTH by BN and brigade (BDG) type HQ |
|
D |
(except when BN or BDG has SVC company) |
|
|
QTY-AUTH by SVC battery/company |
|
E |
QTY-AUTH by numbered battery/company and similar |
F |
|
HQ performing ORG maintenance for other units |
|
|
d. Control |
l |
N F - |
A code l-9 used for sequencing and controlling BOI entries.
C/F-19
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
031 BUILT-IN-TEST CANNOT DUPLICATE PERCENTAGE 2 N R -
The percentage of all Built-In-Test (BIT)/Test indicated malfunctions provided during usage of the equipment that cannot be verified by maintenance personnel performing onequipment troubleshooting.
032 BUILT-IN-TEST DETECTABILITY LEVEL PERCENTAGE 2 N R -
A BIT consists of an integral capability of the mission equipment which provides an onboard automated test capability to detect, diagnose, or isolate system failures. The fault detection/isolation capability is used for momentary or continuous monitoring of a system's operational health, and for observation/ diagnosis as a prelude to maintenance action. BIT subsystems may be designed as an analysis tool for the overall system, integrated with several subsystems, or may be designed as an integral part of each removable component. Detectability Level Percentage is the probability that the malfunction or failure of the UUT will be detected by BIT multiplied by l00.
033 BUILT-IN-TEST RETEST OK PERCENTAGE |
2 N R - |
The percentage of items removed from an end item as a result of BIT indicated malfunction that subsequently pass all related testing at the next maintenance level (eg, intermediate shop).
034 CALIBRATION AND MEASUREMENT REQUIREMENTS 1 A F - SUMMARY PARAMETER CODE
A code specifying whether or not a specific parameter is to be included in the Calibration and Measurement Requirements Summary (CMRS).
Parameter is included in the CMRS |
Y |
Parameter is not included in the CMRS |
N |
035 CALIBRATION AND MEASUREMENT REQUIREMENTS 1 A F - SUMMARY RECOMMENDED
A field depicting whether or not a Calibration and Measurement Requirements Summary is recommended. Codes are as follows:
Calibration and Measurement Requirements |
Y |
Summary (CMRS) recommended |
|
Not recommended for CMRS |
N |
UUT CALIBRATION AND MEASUREMENT REQUIREMENTS SUMMARY RECOMMENDED CODE. A CMRS recommendation code for the unit under test.
C/F-20
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
036 CALIBRATION AND MEASUREMENT REQUIREMENTS 1 A F - SUMMARY STATUS
A code to indicate if a Calibration and Measurement Requirements Summary (CMRS) has been previously developed or is in process for the subject item. Codes are as follows:
Yes |
Y |
No |
N |
UUT CALIBRATION AND MEASUREMENT REQUIREMENTS SUMMARY STATUS. The CMRS status of the UUT.
SE UUT CMRS STATUS. The CMRS status of the SE UUT.
037 CALIBRATION INTERVAL |
2 N R - |
The frequency in months between which a support/test equipment shall be calibrated in order to operate within specified tolerances.
038 CALIBRATION ITEM INDICATOR |
1 |
A F - |
A single position code indicating that the item recommended is itself an item of calibration equipment.
Item is a calibration item |
Y |
Item is not a calibration item |
N |
039 CALIBRATION PROCEDURE |
20 X L - |
The technical manual/order number or instructions that specifies the calibration procedure. For items of TMDE that have an approved method of support, list the applicable military department approved calibration procedure, technical order, or maintenance technical order in the item name block.
041 CALIBRATION STANDARD REQUIRED |
1 A F - |
Indicates the requirement of the support/test equipment to be calibrated using a standard.
Standard required |
Y |
|
Standard not required |
N |
|
042 CALIBRATION TIME |
5 |
N R 1 |
The time, in hours, required to calibrate the support/test equipment.
C/F-21
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
043 CHANGE AUTHORITY NUMBER |
15 X L - |
A number to uniquely identify an authority for an engineering change. The change authority and a numbering sequence will be provided by the Project. This equates to AECMA 2000M TEI CAN although is limited to 15 alpha-numeric characters.
044 SUPPORT EQUIPMENT CHARACTERISTICS |
65 X - |
- |
Narrative information about the operational characteristics of the SE, including minimum and maximum capabilities, of the selected support and test equipment or training device. Any critical or limiting characteristics that shall be considered before substitution of a similar item shall also be included. Narrative specifics might include equipment type; units of measurement; degrees of measurement; and parameters ranges and tolerances. If operational characteristics are classified, state so in this block.
046 COMMERCIAL AND GOVERNMENT ENTITY |
5 X F - |
(CAGE) CODE |
|
In accordance with NATO Standards, this code identifies the Manufacturer, or Organization considered as Manufacturer, that allocates the Reference Number. Codes are as specified in the NATO Supply Code for Manufacturers (NSCM) Cataloguing Handbook H4, and equates to AECMA 2000M TEI MFC and AECMA 1000D MANUFACTURER.
ADAPTOR/INTERCONNECTION DEVICE (AID) CAGE CODE. A CAGE of the adaptor/interconnection device used in conjunction with the SE.
AMMUNITION ITEM CAGE CODE. A CAGE associated with the item of ammunition.
ARN CAGE CODE. A CAGE of the additional reference number.
ARN ITEM CAGE CODE. A CAGE of the primary item additional reference number.
ATE CAGE CODE. A CAGE of the automated test equipment.
CATEGORY 1 CONTAINER MANUFACTURER CAGE CODE. A CAGE of the category 1 container manufacturer. Used in conjunction with Reference Number (DED 337) this equates to AECMA 2000M TEI CTI.
INTEROPERABLE CAGE CODE. A CAGE of the interoperable item.
IP SUBJECT 1 CAGE CODE. A CAGE of the first subject of an IP presentation.
IP SUBJECT 2 CAGE CODE. A CAGE of the second subject of an IP presentation.
C/F-22
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
IP SUBJECT 3 CAGE CODE. A CAGE of the third subject of an IP presentation.
IP SUBJECT 4 CAGE CODE. A CAGE of the fourth subject of an IP presentation.
IP SUBJECT 5 CAGE CODE. A CAGE of the fifth subject of an IP presentation.
IP SUBJECT 6 CAGE CODE. A CAGE of the sixth subject of an IP presentation.
IP SUBJECT 7 CAGE CODE. A CAGE of the seventh subject of an IP presentation.
IP SUBJECT 8 CAGE CODE. A CAGE of the eighth subject of an IP presentation.
OPERATIONAL TEST PROGRAMME (OTP) CAGE CODE. A CAGE of the operational test programme used in conjunction with the SE.
S/N PROVISIONING CAGE CODE. A CAGE of the provisioned item under analysis having a serial number relationship.
SUBJECT ID CAGE CODE. A CAGE of the Initial Provisioning Project Number Subject (DED 805). Used in conjunction with Subject ID Reference Number (DED 337), this equates to AECMA 2000M TEI SID.
SUPPORT EQUIPMENT SUPERSEDURE CAGE CODE. A CAGE of the SE that is superseding or being superseded by the SE under analysis.
SUPPORT EQUIPMENT CAGE CODE. A CAGE of the SE under analysis.
SUPPORT EQUIPMENT UNIT UNDER TEST (SE UUT) CAGE CODE. A CAGE of the SE that is also a calibration and measurement requirements summary category II item.
SYSTEM CAGE CODE. A CAGE of the system equipment item which is identical to the SE.
TASK SUPPORT CAGE CODE. A CAGE of the SE identified for a given task.
TASK PROVISION CAGE CODE. A CAGE of the support item which is being provisioned.
TEST PROGRAMME INSTRUCTION (TPI) CAGE CODE. A CAGE of the test programme instruction used in conjunction with the operational test programme. TESTING SUPPORT EQUIPMENT (SE) CAGE CODE. A CAGE of the support equipment which measures the SE unit under test.
UOC PROVISIONING CAGE CODE. A CAGE of the provisioned item under analysis having a UOC relationship.
C/F-23
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
047 COMMERCIAL AND GOVERNMENT ENTITY CODE |
|
102 |
X |
- |
- |
||
ADDRESS |
|
|
|
|
|
|
|
The manufacturer or government address represented by the CAGE Code. It is divided |
|||||||
into 6 sub-fields. |
|
|
|
|
|
|
|
a. |
CAGE name |
25 |
X |
L |
- |
|
|
b. |
CAGE P.O. box number/street |
25 |
X |
L |
- |
|
|
c. |
CAGE city |
20 |
X |
L |
- |
|
|
d. |
CAGE enter ‘UK’ |
2 |
A |
F |
- |
|
|
e. |
CAGE County name |
20 |
X |
L |
- |
|
|
f. |
CAGE postal zone/code |
10 |
X |
L |
- |
|
|
048 COMMON UNIT UNDER TEST |
|
|
2 |
N |
R |
- |
|
The number of UUTs with which the adaptor/interconnection device or signal conditioning circuitry can be used.
049 COMPENSATING DESIGN PROVISIONS |
65 X - |
- |
A narrative description identifying design provisions which circumvent or mitigate the effects of the failure. A record of the true behaviour of the item in the presence of an internal malfunction or failure. Features of the design at any indenture level that will nullify the effects of a malfunction or failure, control or deactivation system items to halt generation or propagation of failure effects, or activate backup or standby items or systems. Redesign compensating provisions include:
a.Redundant items that allow continued and safe operation.
b.Safety or relief devices such as monitoring or alarm provisions which permit effective operation or limit damage.
c.Alternate models of operation such as backup or standby items or systems.
050 COMPENSATING OPERATOR ACTION PROVISIONS |
65 X L - |
A narrative description describing operator actions to circumvent or mitigate the effect of the postulated failure. Describes the compensating provision that best satisfies the indication(s) observed by an operator when the failure occurs, and the consequences of any probable incorrect action(s) by the operator in response to an abnormal indication.
051 CONCURRENT PRODUCTION CODE (CPC) |
1 A F - |
A code to indicate if the unit of measure or issue price and lot quantity are based on concurrent production of the spare item with the weapon system/end item production.
C/F-24
|
DEF STAN 00-60 (PART 0)/4 |
|
APPENDIX F TO ANNEX C |
Based on concurrent production |
Y |
Not based on concurrent production |
N |
UI PRICE CONCURRENT PRODUCTION CODE. The CPC associated with the UI |
|
price. |
|
UM PRICE CONCURRENT PRODUCTION CODE. The CPC associated with the |
|
UM price. |
|
053 CONTAINER LENGTH |
2 N R - |
The smallest standard container that can be used to transport the system/equipment. Measurement base to be decided by Project.
054 CONTAINER TYPE |
36 X L - |
The designation of the standard container used to transport the system/equipment, eg, ANSI/ISO, EUROPEAN.
055 CONTRACT NUMBER |
19 X L - |
The unique number assigned to the contract in question, by which it can be specifically identified.
SUPPORT EQUIPMENT CONTRACT NUMBER. The contract number of the SE development/procurement.
TRANSPORTATION CONTRACT NUMBER. The contract number for transportation.
056 CONTRACTOR FURNISHED EQUIPMENT/ |
1 A F - |
GOVERNMENT FURNISHED EQUIPMENT (CFE/GFE) |
|
A single-position code indicating the contractor's recommendation for supply action.
CFE |
C |
GFE |
G |
Embodiment Loan Item (Sea Systems use only) |
E |
057 CONTRACTOR RECOMMENDATION |
1 A F - |
A code to signify whether or not the corresponding requirements are contractor recommended. Codes are as follows:
C/F-25
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
Yes |
Y |
No |
N |
059 ANNUAL OPERATING REQUIREMENT CONVERSION 5 N - - FACTOR
A factor (with a decimal locator code) used to convert the AOR of the system/equipment to the AOR of the item under analysis The factor is obtained by dividing the rate of usage of the item under analysis (expressed in cycles, kilometres, rounds, hours, or any other appropriate measurement base) by the rate of usage of the system/equipment (also expressed in the same Measurement Base). Consists of the following sub-fields:
a. |
First Position: |
l |
N |
F |
- |
Decimal Locator Code |
|
|
|
|
|
The location, from the right, of the implied decimal point for the multiplier entered in positions 2 through 5, ie, the number of decimal places.
Integer Number (no decimal places) |
|
0 |
|
|
|
l Decimal place |
|
1 |
|
|
|
2 Decimal places |
|
2 |
|
|
|
3 Decimal places |
|
3 |
|
|
|
4 Decimal places |
|
4 |
|
|
|
b. |
Positions 2 through 5: |
4 |
N |
R |
AS |
Multiplier |
|
The multiplier used in the conversion. |
|
063 CREST ANGLE |
2 N R - |
The angle in degrees that a wheeled vehicle can approach, negotiate, and depart a ramp 4.575 metres (15-feet) long connecting two horizontal surfaces.
064 CREW SIZE |
4 N R - |
The number of personnel assigned to operate a system/equipment.
065 CRITICAL ITEM CODE |
13 X L - |
A series of codes assigned at item assembly level when one or more components comprising the assembly item contain critical/strategic material or when the assembly item as a purchased part meets one or more reasons for criticality. When two or more reasons for criticality apply all applicable codes will be provided.
C/F-26
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
a. |
Position 1 Component Designator |
|
|
|
Purchased part |
P |
|
|
|
Material content |
M |
|
|
|
Both purchased part and material content |
B |
|
|
|
b. |
Positions 2-13 Reason for Criticality |
|
|
|
Surge capacity |
CA |
|
|
|
Cost |
|
CO |
|
|
Environmental Limitations |
EL |
|
|
|
Foreign dependency |
FD |
|
|
|
Foreign source |
FS |
|
|
|
Long lead time |
LL |
|
|
|
Production quality |
PQ |
|
|
|
Production quantity (Supplier cannot provide |
PY |
|
|
|
the item in the quantities needed to meet |
|
|
|
|
accelerated production rates) |
|
|
|
|
MOD Restriction (MOD contract limits source |
MR |
|
|
|
of supply) |
|
|
|
|
Sole/single source qualified |
SQ |
|
|
|
Test Time |
TT |
|
|
|
066 CRITICALITY CODE |
1 |
A F |
- |
|
A code which indicates that an item is technically critical by reason of tolerance, fit restrictions, application, nuclear hardness properties or characteristics which affects identification of the item.
The item has critical features such as tolerance |
C |
fit restrictions or application. Nuclear hardness |
|
properties have not been determined. |
|
The item does not have a critical feature such as |
N |
tolerance, fit restrictions, or application. |
|
Nuclear hardness properties have not been |
|
determined. |
|
The item is specifically designed to be selected as |
H |
being nuclear hard (ie, it will continue to perform |
|
its designed function in an environment created by |
|
nuclear explosion). The item does not have other |
|
critical features. |
|
The item is specifically designed to be selected as |
M |
being nuclear hard. In addition the item has other |
|
C/F-27
DEF STAN 00-60 (PART 0)/4
APPENDIX F TO ANNEX C
critical features such as tolerance, fit restrictions, or application.
The item does not have a nuclear hardened feature or |
X |
any other critical feature such as tolerance, fit |
|
restriction, or application. |
|
The item does not have a nuclear hardened feature |
Y |
but does have other critical feature(s) such as |
|
tolerance, fit restrictions or application. |
|
069 SUPPORT EQUIPMENT MANAGEMENT CODE |
1 A F - |
A one character code identifying calibration management and usage of support equipment to be obtained from the supporting second line maintenance organization. The codes are as follows:
Items used infrequently (less than once per |
E |
month), and indicates the item is available |
|
from the supporting second line maintenance |
|
activities as required. |
|
Items weighing over 100 kg. (over 150 kg for |
P |
wheeled equipment), exceeding any one of the |
|
following dimensions in a stowed configuration: |
|
2 metres by 1 metre by 0.66 metre, fragile or |
|
subject to misalignment or loss of calibration |
|
through transportation, or not coded for |
|
infrequent use. |
|
All items requiring calibration and |
L |
management, designated for use at the first |
|
line level of maintenance, and not already |
|
coded ‘E’ or ‘P’. |
|
Items listed only in a detachment list code |
D |
requiring management, and having a SE management |
|
code of ‘E’ or ‘P’. |
|
Noncalibratable items requiring management |
M |
that are not otherwise SE management coded. |
|
Items that do not require calibration or |
N |
management and consequently not otherwise |
|
SE management coded. |
|
C/F-28