Хорошев / ИЛП_материал_маг_02.15 / DEF STAN 00-60 / Issue 4 / Part 0 - Appendix F to Annex C - Data element dictionary

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

329 RECOMMENDED MINIMUM SYSTEM STOCK LEVEL 3 N R -

A numeric value representing the recommended minimum level of system stock required to support initial deployment of a system/equipment.

Identifies the recommended military rank/rate/civilian grade which is necessary to operate, test, or repair the system/ equipment. Consists of the following sub-fields:

C/F-109

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

The cost, used with an associated Currency Code (DED 629), which is subsequent to technical data package availability and does not include developmental costs.

Recurring administrative cost, used in conjunction with an associated Currency Code (DED 629), of maintaining a bin for an item in the retail supply system for one year.

Recurring administrative cost, used with an associated Currency Code (DED 629), of maintaining an item in the wholesale supply system for one year.

A code which serves as a cross-reference between parts contained in wiring diagrams, hydraulic systems etc. and the Illustrated Parts Catalogue (IPC). Letters, numbers or symbols are used to uniquely identify and locate discrete units, portions thereof and basic parts of a specific component. This equates to AECMA 2000M TEI RFD, limited to 7 characters, which should be referred to for codes and full definition.

C/F-110

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

A code which indicates the type of data entered in reference designation block.

Any number, other than a government organization stock number, used to identify an item of production, or used by itself or in conjunction with other reference numbers to identify an item of supply. Reference numbers include manufacturer's part, drawing, model, type, or source controlling numbers; manufacturer's trade name; specification or

C/F-111

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

standard numbers; and, specification or standard part, drawing, or type numbers (for applicable formats use NATO Manual on Codification A Cod P-1 Chapter IV, Annex A).

This equates to AECMA 2000M TEI PNR and TEI RPP it also equates to AECMA 1000D MANUFACTURERS PART NUMBER.

NOTE: The combination of Reference Number and CAGE (DED 046) constitute AECMA 2000M TEI CTI.

The following precedence for reference number assignment should be used:

a.First Precedent Reference Number. The line item is identified by a government or industry association specifications, drawing, or standard number, eg, service drawing, which completely identifies the item including its physical, mechanical, electrical and dimensional characteristics. (If the government or industry association specification or standard number does not fully identify the item, then the actual manufacturer's identifying reference number becomes the first precedent reference number.) If the government or industry specification, drawing or standard completely identifies the item, at least one additional reference number (DED 006) citing a manufacturer or vendor reference number shall be provided.

b.Second Precedent Reference Number. The item identifying part, drawing, or catalogue number of the actual manufacturer who supplies the item. The manufacturer is the company or government organization exercising design control over the item.

ADAPTOR/INTERCONNECTION DEVICE (AID) REFERENCE NUMBER. A reference number of the adaptor/interconnection device used in conjunction with the SE.

AMMUNITION ITEM REFERENCE NUMBER. A reference number for an item of ammunition.

ARN ITEM REFERENCE NUMBER. A reference number of the primary item under analysis.

ATE REFERENCE NUMBER. A reference number of the automatic test equipment.

CATEGORY 1 CONTAINER REFERENCE NUMBER. A reference number of the category 1 container.

INTEROPERABLE REFERENCE NUMBER. A reference number of the interoperable item.

IP SUBJECT 1 REFERENCE NUMBER. A REFERENCE NUMBER of the first subject of an IP presentation.

C/F-112

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

IP SUBJECT 2 REFERENCE NUMBER. A REFERENCE NUMBER of the second subject of an IP presentation.

IP SUBJECT 3 REFERENCE NUMBER. A REFERENCE NUMBER of the third subject of an IP presentation.

IP SUBJECT 4 REFERENCE NUMBER. A REFERENCE NUMBER of the fourth subject of an IP presentation.

IP SUBJECT 5 REFERENCE NUMBER. A REFERENCE NUMBER of the fifth subject of an IP presentation.

IP SUBJECT 6 REFERENCE NUMBER. A REFERENCE NUMBER of the sixth subject of an IP presentation.

IP SUBJECT 7 REFERENCE NUMBER. A REFERENCE NUMBER of the seventh subject of an IP presentation.

IP SUBJECT 8 REFERENCE NUMBER. A REFERENCE NUMBER of the eighth subject of an IP presentation.

OPERATIONAL TEST PROGRAMME (OTP) REFERENCE NUMBER. A reference number of the operational test programme being used in conjunction with the SE.

SUBJECT ID REFERENCE NUMBER. A reference number of the Initial Provisioning Project Number Subject (DED 805). Used in conjunction with Subject ID CAGE (DED 046), this equates to AECMA 2000M TEI SID.

SUPPORT EQUIPMENT UUT REFERENCE NUMBER. A reference number of the SE that is also a category II calibration and measurement requirements summary item.

S/N PROVISIONING REFERENCE NUMBER. A reference number of the provisioned item under analysis having a serial number relationship.

SUPPORT EQUIPMENT SUPERSEDURE REFERENCE NUMBER. A reference number of the SE that is superseding or being superseded by the SE under analysis.

SUPPORT EQUIPMENT REFERENCE NUMBER A reference number of the SE under analysis.

SYSTEM REFERENCE NUMBER. The reference number of the system equipment item which is identical to the piece of SE.

TASK SUPPORT REFERENCE NUMBER. A reference number of the SE identified for a given task.

C/F-113

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

TASK PROVISION REFERENCE NUMBER. A reference number of the support item which shall be provisioned.

TESTING SE REFERENCE NUMBER. A reference number of the SE that is measuring the SE Unit Under Test.

TEST PROGRAMME INSTRUCTION (TPI) REFERENCE NUMBER. A reference number of the test programme instruction used in conjunction with the SE.

UOC PROVISIONING REFERENCE NUMBER. A reference number of the provisioned item under analysis having a Usable On Code relationship.

A code assigned to the reference number to indicate the category or relationship of the number to an NSN or another reference number. This equates to AECMA 2000M TEI RNC. For authorized codes refer to AECMA 2000M TEI RNC.

A code assigned to a reference number to indicate that the cited number is item identifying, is not item identifying or is a reference number for information only. This equates to AECMA 2000M TEI RNV. For authorized codes refer to AECMA 2000M TEI RNV.

Narrative information stating compliance with applicable regulatory transportation requirements.

A code that indicates the reliability, availability, and maintainability (RAM) characteristics narrative.

C/F-114

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

A code that signifies whether RAM information is to be documented against the LCN item.

Narrative information stating or describing that an item needs to be considered for age exploration.

This is a 25 block spread format, each logic result will consist of one 1 position block. The results of the decision logic of a Reliability-Centred Maintenance (RCM) analysis. Codes will denote a yes or no answer, respectively, to each corresponding question in the RCM logic tree utilized, or a code as specified by the Project.

The source document or specification in compliance with which the Reliability-Centred Maintenance (RCM) analysis has been conducted (eg, AP100C-22 and NES 45).

AP 100C-22 will be the Standard for Air Systems and NES 45 will be the standard for Sea Systems.

A narrative describing the reasoning behind the RCM logic results and disposition choices.

347 RELIABILITY/MAINTAINABILITY INDICATOR CODE 1 A F -

A code used to indicate whether the reliability and maintainability parameters are allocated, predicted, or measured analysis values.

C/F-115

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

A single character identifying an item for which an unserviceable unit will be turned-in on an exchange basis after receipt of a serviceable unit. Codes and definitions are as follows:

A code used to uniquely identify a specific remark. Once associated with a remark, a code may not be associated with any other remark, regardless of LCN and task code. However, once assigned, the same code shall be used to identify subsequent occurrences of that remark, regardless of LCN and task code.

The elapsed time, in days, of the complete repair cycle for a repairable item expected at each maintenance level (for definition of O/M Level, see DED 277) and at contractor facility. Sub-field f. equates to AECMA 2000M TEI CRT.

Repair Cycle Time at Specialized Repair Activity

For Land Systems: May be used to indicate RCT of key

C/F-116

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

operational equipments and assemblies at ‘strategic 3rd line repair facilities’

Option 1.

a.For O/M levels O, F, J, K, H, E and L, the elapsed time in days beginning with the removal and replacement of an item to be repaired below depot level, and ending with the pickup of the serviceable item on the appropriate supply records.

b.For O/M level D, the number of days includes the time involved in the following:

(1)Removal and preparation of unserviceable items for shipment to UK airhead or overseas airhead.

(2)Shipment to air terminal.

(3)Shipment from airhead of embarkation to UK airhead of disembarkation (overseas activities only).

(4)Shipment from airhead to UK depot level maintenance organization.

(5)Receiving/shop planning/batching.

(6)Shop flow-time, including inspection.

(7)Packaging.

(8)Pickup on accountable records.

c.For Fourth Line/Contractor repairable items, the elapsed time in days from time of receipt of the failed item at the contractor's facility, until the item is returned to the designated receiving point.

Option 2. The elapsed time in days from receipt of a failed item at the maintenance level, until the item is ready for issue as a serviceable item.

The percentage of depot repairable assets which, through rework, will be returned to serviceable condition.

The cost of repair work floor space for a maintenance facility for a specific level of maintenance. It is based on the cost, used with an associated Currency Code (DED 629), per square metre per month.

C/F-117

DEF STAN 00-60 (PART 0)/4

APPENDIX F TO ANNEX C

The Provisioning List Item Sequence Number (PLISN) which is replacing or is being replaced in relationship to another PLISN.

A code to indicate type of data entered in the Replaced or Superseding Provisioning List Item Sequence Number.

The estimated percentage of the removals and replacements of an item that will be accomplished at each specified maintenance level. For definition of each O/M level, see DED 277.

Replacement Task Distribution at Second Line or

Second Line/Close Support

Replacement Task Distribution at Second Line Regional/

Static, Second Line/General Support or Embarked Second Line

Replacement Task Distribution at Specialized Repair Activity

For Land Systems: May be used to indicate Repair Cycle Time of key operational equipments and assemblies at strategic 3rd line repair facilities

Replacement Task Distribution at Third or Fourth Line.

C/F-118