Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:

Стеклянные передвижные перегородки

.pdf
Скачиваний:
15
Добавлен:
02.05.2015
Размер:
23.72 Mб
Скачать

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

HSW

 

 

Vertical Seals

www.know-house.ru/infotek/

 

 

 

 

 

Accessories

 

Fineline

 

 

 

 

 

 

 

 

Sliding panel

Fixed when the frontage or partition is closed.

The sliding panels are the moving elements. Once in their closed position, they are locked down. The components available for this are provided in the bottom glazing rail in the form of face-mounted floor bolts, end-mounted floor bolts, end pin bolts or deadlocks.

Calculation of the glass width

= Panel width – 16 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

Sliding panel

 

ø 9.8

Adapted

 

 

 

 

 

 

 

 

130)

 

18.5

 

 

 

 

M4

 

 

 

delivered-As length (total height

 

Profilelength adapted on site

20 25

 

Sliding panel

 

 

7

 

 

 

 

 

4

 

 

 

 

 

13

 

 

 

 

1

 

 

 

 

 

32

 

Bottom drill hole or recess for end-mounted floor bolt machined by DORMA-Glas

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

Use the factory-stamped recesses in the bearing profile for accurate adjustment of the top Fineline profile.

84

07/08

ТЕХНИЧЕСКАЯ ИНФОТЕКА www.know-house.ru/infotek/

Sliding panels in segmented configurations

Fixed when frontage or partition closed.

The sliding panels are the moving elements. Once in their closed position, they are locked down. The components available for this are provided in the bottom glazing rail in the form of face-mounted floor bolts, end-mounted floor bolts, end pin bolts or deadlocks.

Calculation of the glass width

= Panel width – 16 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

Sliding panels in segmented configurations

Profile to

Brush

upper face of

13

brush carrier

 

 

ø 9.8

Adapted

 

 

 

 

 

 

 

 

 

 

70)

 

57.5

 

 

 

 

height –

 

M4

site

 

 

 

(totallengthdelivered-As

 

 

adaptedlengthProfileon

25

 

Sliding panel

 

 

 

 

 

 

 

 

 

 

20

 

4

 

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

 

7

1

 

 

 

 

 

 

32

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

07/08

85

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

HSW

 

 

Vertical Seals

www.know-house.ru/infotek/

 

 

 

 

 

Accessories

 

Fineline

 

 

 

 

 

 

 

 

Double action sliding panel

Double action panel with RTS

Double action sliding panel

transom-concealed door closer for door access when frontage or partition closed.

Calculation of the glass width

= Panel width – 16 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

 

 

 

RTS 85

 

M4

 

 

(total height – 165)

Adapted

on site

20

As-delivered length

 

Profile length adapted

20

 

M4x25

Sliding

Double action sliding

panel

panel with RTS

4

65

13

52

32

 

1

 

7

 

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

86

07/08

ТЕХНИЧЕСКАЯ ИНФОТЕКА www.know-house.ru/infotek/

Folding sliding panel

Hinged, with lock and slide bolt at the bottom, latching bolts top and bottom for fixing the final folding panel to the sliding panel.

Calculation of the glass width

= Panel width – 16 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

Folding sliding panel

 

11

 

 

Milled

 

 

 

Milled

111

174

178

 

 

932

Lock with lever handle and strike box optional.

ø 50

80

50 1050

7

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

07/08

87

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

HSW

 

 

Vertical Seals

www.know-house.ru/infotek/

 

 

 

 

 

Accessories

 

Fineline

 

 

 

 

 

 

 

 

Fineline Seal

Profile machining

This is performed by DORMAGlas for the end-mounted and face-mounted slide bolts.

 

Fineline seal with end-mounted slide bolt

 

 

 

 

 

7

1

 

 

ø16

4

 

 

 

13

 

 

 

12

 

 

 

 

 

60

30

 

 

 

42

 

 

M4x30

37

M4x18

 

20

 

 

 

 

 

 

 

 

 

45

70

 

 

 

33

 

 

 

 

 

28

 

Fineline seal with face-mounted slide bolt

 

 

7

1

 

4

 

 

13

 

 

 

97

30

20

52

 

 

 

70

 

 

33

 

 

 

65

 

88

07/08

 

 

 

 

 

 

 

 

 

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

 

 

HSW

 

 

Vertical Seals

 

www.know-house.ru/infotek/

 

 

 

 

 

 

Accessories

 

Line

 

 

 

 

 

 

 

 

 

 

 

 

Line Seal

Single action or double action end panels

Non-moving and always equipped with a bottom deadbolt with the option of an additional top bolt or side-action deadlock.

Can be designed as a single action or double action door.

Calculation of the glass width

= Panel width – 30 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

Single action or double action end panel with floor pivot

 

 

ø 9.8

 

 

Adapted

57.5

 

 

 

70)

M4

 

 

 

 

 

 

 

lengthProfileadapted on site

20 25

 

delivered-Aslength (total height

 

63

 

 

 

4

Bottom drill hole or recess for end-mounted floor bolt machined

by DORMA-Glas

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align

07/08

89

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

HSW

 

 

Vertical Seals

www.know-house.ru/infotek/

 

 

 

 

 

Accessories

 

Line

 

 

 

 

 

 

 

 

Sliding panel

Fixed when the frontage or

Sliding panel

partition is closed.

The sliding panels are the moving elements. Once in their closed position, they are locked down. The components

available for this are provided in the bottom glazing rail in the form of face-mounted

floor bolts, end-mounted floor bolts, end pin bolts or deadlocks.

 

Adapted

ø 9.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

site

– 130)

25

 

 

 

 

M4

height

 

 

Sliding panel

 

 

 

 

 

 

 

 

Profilelength adapted on

delivered-As length (total

 

 

 

 

 

20

33.5

4

13.5

 

 

 

 

 

 

 

Calculation of the glass width

 

 

 

 

25

15

 

= Panel width – 30 mm

 

 

 

 

 

 

 

As-delivered condition:

 

 

 

 

 

 

 

Cut lengths supplied from

 

factory

 

= Partition height – 100 mm

 

Holes and recesses are

Bottom drill hole or recess for end-mounted floor bolt

pre-machined in the profile

for the bottom glazing rail

machined by DORMA-Glas

only.

 

Any further machining work

 

required for connection to

 

the top glazing rail has to be

 

performed on site.

 

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

90

07/08

ТЕХНИЧЕСКАЯ ИНФОТЕКА www.know-house.ru/infotek/

Double action sliding panel

Double action panel

Double action sliding panel

with RTS transom-concealed door closer for door access when frontage or partition closed.

Calculation of the glass width

= Panel width – 30 mm

As-delivered condition:

Cut lengths supplied from factory

= Partition height – 100 mm Holes and recesses are pre-machined in the profile for the bottom glazing rail only.

Any further machining work required for connection to the top glazing rail has to be performed on site.

 

 

RTS 85

 

 

 

 

M4

 

 

 

 

– 165)

Adapted

2020

 

 

M4x30

height(totallengthdelivered-As

siteonadaptedlengthProfile

33.5

13.5

Double action sliding

 

 

 

 

Sliding

 

 

 

 

panel

panel with RTS

 

 

 

 

4

65

 

 

 

 

25

40

 

 

 

 

15

 

Installation instructions

When fitting the glazing rails, please ensure that the glass protrusion is even over the full length.

Prior to profile machining, first hang the panels from the overhead track and then align.

07/08

91

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

HSW

 

 

Vertical Seals

www.know-house.ru/infotek/

 

 

 

 

 

Accessories

 

Line

 

 

 

 

 

 

 

 

Profile machining

This is performed

by DORMA-Glas for the end-mounted and face-mounted slide bolts.

Line seal with end-mounted slide bolt

 

 

 

15

 

 

 

 

ø 25

4

 

 

 

12

25

 

 

 

 

 

 

65

30

 

 

 

M4

 

 

 

 

 

x 40

 

 

20

 

 

30

M4x35

 

 

 

 

 

 

45

33

 

 

 

 

 

 

 

45

 

 

Line seal with end-mounted slide bolt

 

 

 

15

 

33.5

4

 

13.5

 

25

 

 

 

 

85

30

 

30

 

70

 

 

 

33

 

38,3

65

 

 

 

92

07/08

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ТЕХНИЧЕСКАЯ ИНФОТЕКА

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HSW

 

 

 

 

Notes

 

 

 

 

 

 

 

 

 

 

 

www.know-house.ru/infotek/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

07/08

93