Visit the Alpha website at www.alpha.ca for the latest manual and product downloads

6.4.3Charge Current Control (CCC)

6.4.3.1Enable

This menu item enables the Supervisor to control the CXC’s Charge Current Control feature.

Battery Properties section must be completed to enable this feature.

6.4.3.2Charge Rate Limit

This menu item enables the Supervisor to program the amount of current that goes into the battery and is dependent upon the Supervisor-entered parameter Capacity Rating (C), see 6.4.8.1. The Charge Rate amount is represented in amps (X) or as a C/X value (Capacity Rating/Charge Rate Amps).

The Charge Rate Amps is recalculated if the Charge Rate C/X value or the Capacity Rating is modified.

Dynamic CCC Trigger

This pull-down menu enables the Supervisor to select the event that triggers the Dynamic CCC

feature (if enabled).

Figure 35–Charge Current Control web interface window

6.4.3.3Enable Dynamic CCC

This menu item enables the Supervisor to control the CXC’s Dynamic Charge Current Control feature. Battery Properties section must be completed to enable this feature.

NOTE: There is a separate set of Charge Rate Limit values that can be input for the Dynamic CCC feature.

6.4.3.4Battery Properties (See 6.4.8)

The “Battery Properties” button at the bottom of the Charge Current Control window is a link to the Battery Properties window.

The return path (the menu structure) will remain intact; i.e., the user will return through the window where the Battery Properties button was tapped.