Refer to the back of this manual for Factory Service and Technical Support contact information

5.1.5Virtual Numeric Keypad

Whenever a numeric field is selected, a virtual numeric keypad will appear (in a pop-up window) to enable editing of the value, see Figure 24 below:

Figure 24–Virtual numeric keypad pop-up window

Tap the keypad to edit or enter a value. Use the virtual function buttons described above to navigate, cancel or accept.

5.2Basic Programming Example

To adjust settings in the RECTIFIERS\ CONFIGURE SETTINGS menu, see 6.3.2:

1.Using the navigation arrows, scroll to the item that is to be changed; e.g. FLOAT VOLTAGE.

2.Enter a new value using the CXC’s virtual numeric keypad (shown above); e.g. 54.00.

Download new settings to all connected rectifiers:

3.Return to MAIN MENU navigation screen and press the OPTION button to evoke the SAVE/LOGOUT pop-up window.

4.Select SAVE to save the new settings or select LOGOUT to clear. A pop-up window will appear to confirm the selection.

5.3Advanced Programming

See Section 7.

When configuring Alarms (6.5.3), Signals (6.6.2), or Controls (0), an option to CUSTOMIZE will be presented at the bottom of the screen. This enables the Supervisor to program separate triggering equations into the CXC software. The equations may reference any combination (up to 16) of the analog inputs, digital inputs, virtual inputs, and alarms utilizing logical and arithmetic arguments that simulate the functionality of a programmable logic controller (PLC).