45 Many types of engineering employ reliability engineers and use the tools and methodology of reliability engineering. For example:

67 Many tasks, methods, and tools can be used to achieve reliability. Every system requires a different level of reliability. A commercial airliner must operate under a wide range of conditions. The consequences of failure are grave, but there is a correspondingly higher budget. A pencil sharpener may be more reliable than an airliner, but has a much different set of operational conditions, insignificant consequences of failure, and a much lower budget.

68 A reliability program plan (RPP) is used to document exactly what "best practices" (tasks, methods, tools, analyses, and tests) are required for a particular (sub)system, as well as clarify customer requirements for reliability assessment. For large scale, complex systems, the Reliability Program Plan is a distinctive document. For simple systems, it may be combined with the systems engineering management plan or an integrated logistics support management plan. A reliability program plan is essential for a successful reliability, availability, and maintainability (RAM) program and is developed early during system development, and refined over the systems life-cycle. It specifies not only what the reliability engineer does, but also the tasks performed by other stakeholders. A reliability program plan is approved by top program management, who is responsible for identifying resources for its implementation.

121 Design For Reliability (DFR), is an emerging discipline that refers to the process of designing reliability into designs. This process encompasses several tools and practices and describes the order of their deployment that an organization needs to have in place to drive reliability and improve maintainability in products, towards a objective of improved availability, lower sustainment costs, and maximum product utilization or lifetime. Typically, the first step in the DFR process is to establish the system’s availability requirements. Reliability must be "designed in" to the system. During system design, the top-level reliability requirements are then allocated to subsystems by design engineers, maintainers, and reliability engineers working together.

203 The American Society for Quality has a program to become a Certified Reliability Engineer, CRE. Certification is based on education, experience, and a certification test: periodic re-certification is required. The body of knowledge for the test includes: reliability management, design evaluation, product safety, statistical tools, design and development, modeling, reliability testing, collecting and using data, etc.

acceptable

42 The function of reliability engineering is to develop the reliability requirements for the product, establish an adequate life-cycle reliability program, show that corrective measures (risk mitigations) produce reliability improvements, and perform appropriate analyses and tasks to ensure the product will meet its requirements and the unreliability risk is controlled to an acceptable level. It needs to provide a robust set of (statistical) evidence and justification material to verify if the requirements have been met and to check preliminary reliability risk assessments. The goal is to first identify the reliability hazards, assess the risk associated with them and to control the risk to an acceptable level. What is acceptable is determined by the managing authority

83 Help assess the effect of product reliability on the maintenance activity and on the quantity of spare units required for acceptable field performance of any particular system. For example, predictions of the frequency of unit level maintenance actions can be obtained. Reliability prediction can be used to size spare populations.

assess

42 The function of reliability engineering is to develop the reliability requirements for the product, establish an adequate life-cycle reliability program, show that corrective measures (risk mitigations) produce reliability improvements, and perform appropriate analyses and tasks to ensure the product will meet its requirements and the unreliability risk is controlled to an acceptable level. It needs to provide a robust set of (statistical) evidence and justification material to verify if the requirements have been met and to check preliminary reliability risk assessments. The goal is to first identify the reliability hazards, assess the risk associated with them and to control the risk to an acceptable level. What is acceptable is determined by the managing authority

83 Help assess the effect of product reliability on the maintenance activity and on the quantity of spare units required for acceptable field performance of any particular system. For example, predictions of the frequency of unit level maintenance actions can be obtained. Reliability prediction can be used to size spare populations.

116 The combination of reliability parameter value and confidence level greatly affects the development cost and the risk to both the customer and producer. Care is needed to select the best combination of requirements - e.g. cost-effectiveness. Reliability testing may be performed at various levels, such as component, subsystem, and system. Also, many factors must be addressed during testing and operation, such as extreme temperature and humidity, shock, vibration, or other environmental factors (like loss of signal, cooling or power; or other catastrophes such as fire, floods, excessive heat, physical or security violations or other myriad forms of damage or degradation). Reliability engineering must assess the root cause of failures and devise corrective actions. Reliability engineering determines an effective test strategy so that all parts are exercised in relevant environments in order to assure the best possible reliability under understood conditions. For systems that must last many years, reliability engineering may be used to design accelerated life tests.

122 Reliability design begins with the development of a (system) model. Reliability models use block diagrams and fault trees to provide a graphical means of evaluating the relationships between different parts of the system. These models incorporate predictions based on parts-count failure rates taken from historical data. While the (input data) predictions are often not accurate in an absolute sense, they are valuable to assess relative differences in design alternatives.

block