Хорошев / ИЛП_материал_маг_02.15 / Спецификация AECMA Specification 2000M / MIL-STD-1388-2B

MIL-STD-1388-2B

APPENDIX A

100. FACILITIES CONSIDERATIONS. Data tables beginning with “F” in the first

position of the table code are structured to describe and justify all proposed special and additional facilities requirements, which are indicated as a

result of the operational/maintenance task analysis. Figure 10 depicts the relational hierarchy of these tables/entities.

100.1 Table FA, Facility. This table identifies the facility by name, category code, and type that the system/equipment under analysis requires. The table keys are Facility Name (FACNAMFA), Facility Category Code

(FACCCDFA), and Facility Type (FACTYPFA). For a given row of information, the following cross-element edits apply to table FB:

a. Facility Area (FAAREAFA) and Facility Area UM (FMRUMFA) must either both be blank, or both have entries.

b. Facility Construction Unit of Measure Price (FACNCOFA) and Construction Unit of Measure (CONUOMFA) must either both be blank, or both have entries.

100.2 Table FB. Facility Narrative. This table may be used to identify Facility Capability, and Facility Location of either the baseline facility or the new or modified facility. The table keys consist of Facility Name (FACNAMFA), Facility Category Code (FACCCDFA), Facility Type (FACTYPFA), Facility Narrative Code (FNCODEFB), and Facility Narrative Text Sequencing Code (TEXSEQFB). For a given row of information, the following cross-element edits apply to table FB:

a. If the Facility Narrative Code (FNCODEFB) is (A), then this table identifies the capacity impact on the work load of the facility (Facility

- 81 -

MIL-STD-1388-2B

APPENDIX A

Capability, DED 114).

b. If the Facility Narrative Code (FNCODEFB) is (B), then this table identifies the existing depot facility in terms of where the facility is located (e.g., depot name, building, bay, etc.) (Facility Location, DED 117).

100.3 Table FC. Baseline Facility Narrative. This table may be used to identify Facility Maintenance Requirements, Facility Requirements for Operations, Facility Training Requirement, Facility Requirements Special Considerations , and Facility Requirements Supply and Storage for a baseline facility. Baseline is describing the requirements needed for a facility, this applies to both an existing facility and a new or modified facility. The table keys consist of Baseline Facility Name (FACNAMFC), Baseline Facility Category Code (FACCCDFC), Baseline Facility Type (FACTYPFC), Baseline Facility Narrative Code (FBNACDFC), and Baseline Facility Narrative Text Sequencing Code (TEXSEQFC). For a given row of information, the following cross-element edits apply to table FC:

a. If Baseline Facility Narrative Code (FBNACDFC) is (A), then this table identifies the maintenance concept for the system/equipment under analysis and the facilities that are required to maintain the system (Facilities Maintenance Requirement, DED 107).

b. If Baseline Facility Narrative Code (FBNACDFC) is (B), then this table identifies what facilities are needed to support the system in its daily use (Facilities Requirements For Operations, DED 109).

c. If Baseline Facility Narrative Code (FBNACDFC) is (C), then this table identifies what facilities are needed for training (Facilities Requirement for Training, DED 110).

d. If Baseline Facility Narrative Code (FBNACDFC) is (D), then this table describes any special considerations which impact facility requirements (Facility Requirements Special Considerations, DED 120).

e. If Baseline Facility Narrative Code (FBNACDFC) is (E), then this table describes where the system/equipment will be stored, or if there is an impact in other storage facilities (Facility Requirements Supply/Storage, DED 121).

MIL-STD-1388-2B

100.4 Table FD. New or Modified Facility Narrative.

information about modifications of existing facilities or requirements for new facilities. This table may be used to identify Facility Design Criteria, Facility Installation Lead Time, Facility Task Area Breakdown, Facility Utilization, Facility Requirements, Facility Unit Cost Rationale, Facility Justification, Type of Construction, and Utilities Requirement. The table keys consist of New or Modified Facility Name (FACNAMFD), New or Modified Facility Category Code (FACCCDFD), New or Modified Facility Type (FACTYPFD) New or Modified Facility Narrative Code (NMFNCDFD), and Text Sequencing Code (TEXSEQFD). For a given row of information, the following cross-element edits apply to table FD:

a. If the New or Modified Facility Narrative Code (NMFNCDFD) is (A), then this table describes the facility design requirements necessary to support the item under analysis (Facility Design Criteria, DED 105).

b.If the New or Modified Facility Narrative Code (NMFNCDFD) is (B), then this table describes the facilities installation lead time schedules for contractor produced and installed support, test equipment, and training devices (Facility Installation Lead Time, DED 106).

c.If the New or Modified Facility Narrative Code (NMFNCDFD) is (C), then this is a narrative description identifying the breakdown of a new or modified facility for the area by individual tasks at the job level to determine

maximum use of space (Facility Task Area Breakdown, DED 122) .

d.If the New or Modified Facility Narrative Code (NMFNCDFD) is (D), then this is a table describing the new or modified facility utilization rate (Facilities Utilization, DED 111).

e.If the New or Modified Facility Narrative Code (NMFNCDFD) is (E), then this table describes the location of and the functions to be performed at the new or modified facility (Facilities Requirements, DED 108).

f.If the New or Modified Facility Narrative Code (NMFNCDFD) is (F), then this is a narrative field identifying variations to the appropriate unit cost contained in the military construction guides (Facility Unit Cost Rationale, DED 123).

g.If the New or Modified Facility Narrative Code (NMFNCDFD) is (G), then this is a narrative field which identifies the major factors which led to the decision that a new facility was required (Facility Justification, DED 188).

h.If the New or Modified Facility Narrative Code (NMFNCDFD) is (H), then this table describes what type of construction is required at a new or modified facility (Type of Construction, DED 482).

i.If the New or Modified Facility Narrative Code (NMFNCDFD) is (I), then this is a narrative description identifying an estimate of the utilization required for a new or modified facility (Utilities Requirement, DED 502).

-84 -

MIL-STD-1388-2B

APPENDIX A

110. PERSONNEL SKILL CONSIDERATIONS. Data tables beginning with “G” in the first position of the table code are structured to describe and justify any new or modified personnel skills required to support the system/equipment.

Figure 11 depicts the relational hierarchy of these tables/entities,

110.1 Table GA, Skill Specialty. This table contains information about military and civilian skill specialties. The table key is SSC (SKSPCDGA). For a given row, Hour Labor Rate (HRLARTGA) is per SSC (SKSPCDGA).

110.2 Table GB, New or Modified Skill. This table contains information about new or modified skill requirements. The key for this table is New or Modified SSC (MDCSSCGB). For a given row of information, the following cross-element edits apply to table GB:

a. SSC (SKSPCDGA) is migrated into this table as nonidentifying key which means that this key is not required to uniquely identify an instance of the entity .

b. A Security Clearance (SCRSSCGB) is required for each New or Modified SSC (MDCSSCGB).

ASVAB AFQT Expected Range Low (AAEXRLGB) and High (AAEXRHGB) are requ~red for each ASVAB AFQT Score (ABAFQTGB).

d. ASVAB AFQT Lowest Percent Low (lWLPRLGB) and High (AALPRHGB) are required for each ASVAB AFQT Score (ABAFQTGB).

MIL-STD-1388-2B

110.3 Table GC, New or Modified Skill Narrative. This table may be used to identify New or Modified Skill Additional Requirements, Educational Qualifications , Skill Justification, and Additional Training Requirements. The table keys consist of New or Modified SSC (MDCSSCGB), New or Modified Skill Narrative Code (NMSNCDGC), and New or Modified Skill Narrative Text Sequencing Code (TEXSEQGC). For a given row of information, the following cross-element edits apply to table GC:

a. If the New or Modified Skill Narrative Code is (A), then this table describes the new skills that are required in order to operate and maintain the equipment under analysis (New or Modified Skill Additional Requirements, DED 007).

b.If the New or Modified Skill Narrative Code is (B), then this table describes the educational prerequisites recommended to acquire the skill necessary to perform the task (Educational Qualifications, DED 094).

c.If the New or Modified Skill Narrative Code is (C), then this table identifies the major factors which led to the decision that training is needed

for the new or modified skill (Skill Justification, DED 188).

d. If the New or Modified Skill Narrative Code is (D), then this table describes the additional training required for maintenance, operator, and instructor personnel (Additional Training Requirements, DED 012) .

110.4 Table GD. Skill ADtitude Data. This table contains information about Armed Sevices Vocational Aptitude Battery scores. The table keys consist of New or Modified Skill Specialty Code (MDCSSCGB) and ASVAB Aptitude Element (ASVAPEGD).

a.ASVAB Aptitude Element Expected Range Low (AAEERLGD) and High

-88 -