Хорошев / ИЛП_материал_маг_02.15 / Спецификация AECMA Specification 2000M / MIL-STD-1388-2B

MIL-STD-1388-2B

APPENDIX A

FIGURE 12. H table relationships.

91

120.2 Table HB, Additional Reference Number. This table contains Additional Reference Numbers (ARN) that may be used to identify the item of supply. Table keys include item Reference Number (REFNUMHB) and CAGE (CAGECDHB) from table HA, additional CAGE (ADCAGEHB) from table X-H, and MW (ADDREFHB). In a given row, when the ARN and CAGE match the primary Reference Number and CAGE,

there must be an entry in Reference Number Category Code (RNCC) and this entry must be different from the RNCC entry in table HA.

MIL-STD-1388-2B

120.3 Table HC. Contractor Technical Information Code (CTIC) CAGE. This table contains CTIC CAGES. Table keys include: item reference number (REFNUMHC), and CAGE, (CAGECDHC) from table HA, and CTIC CAGE (CTCAGEHC) from table XH. CTIC (CTICODHA) must be established in Table HA with values of either “-K”, “-M”, or “- N“ for the reference number and CAGE combination, prior to establishing a value in this table.

120.4 Table HD. Item Unit of Issue Price. This table contains UI prices and associated information about the UI price. Table keys include: Reference Number (REFNUMHA), CAGE (CAGECDXH), and UI Price (UIPRICHD).

a.UI (HA.UNITISHA) must be established in table HA for the Reference

Number and CAGE combination prior to establishing a value in this table.

b. For identical Reference Number and CAGE keys, only one row of information can be established with a “Y” Provisioning UI Price Code (PROUIPHD).

c. Lot Quantity From (LOTQFMHD) must be less than or equal to Lot Quantity To (LOTQTOHD) in any row.

120.5 Table HE, Item Unit of Measure Price. This table contains UM prices and associated information about the UM price. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); and, UM Price (UMPRICHE).

a. UM (l+.A.UNITMSHA) must be established in table HA for the Reference Number and CAGE combination prior to establishing a value in this table.

-94-

MIL-STD-1388-2B

Appendix A

b. For identical Reference Number and CAGE keys, only one row of information can be established with a “Y” Provisioning UM Price Code (PROUMPHD).

. Lot Quantity From (LOTQFMHE) must be less than or equal to Lot Quantity To (LOTQTOHE) in any row.

120.6 Table HF. Item Packaging Requirement. This table contains packaging data, as specified by MIL-STD-2073-1 and MIL-STD-2073-2. Table keys are: Reference Number (REFNUMHA); CAGE (CAGECDXH); and, Degree of Protection (DEGPROHF).

a. Unit Pack Length (LENUPKHF), Width (WIDUPKHF), and Depth (DEPUPKHF) must either all be blank or all have entries for a row of information.

—

b. Unit Pack entries must be greater than or equal to Unit Size entries in table HA (LENUPKHF greater than or equal to ULENGTHA; WIDUPKHF greater than or equal to UWIDTHHA; and, DEPUPKHF greater than or equal to UHEIGHHA).

For numeric entry, Unit Pack Weight (UNPKWTHF) must be greater than or equal to Unit Weight (UWEIGHHA).

d. Packaging data preparer CAGE (PKCAGEHF) is a nonidentifying key migrating from table XH.

—1

120.7 Table HG. Part Application Provisioning. This table contains parts related information to the part in a specific hardware application. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB); and, LCN Type (LCNTYPXB).

a.LCN Type must always be “P” (Physical).

b.Maintenance Action Code (MAIACTHG) is not allowed without Maximum Allowable Operating Time (MAOTIMHG).

c.Maintenance Task Distribution subfields (OMTDOOHG, FMTDFFHG, HMTDHHHG,

LMTDLLHG, DMTDDDHG, CBDMTDHG, and CADMTDHG) must always total to 100 percent.

d.Replacement Task Distribution subfields (ORTDOOHG, FRTDFFHG, HRTDHHHG,

LRTDLLHG, and DRTDDDHG) must always total to 100 percent.

e. PCCN (PCCNUMXC) and Provisioning List Item Sequence Number (PLISN) (PLISNOHG) combinations must be unique across all rows of information (PLISNS are mapped to respective PCCNs in Table XC through Table HO).

f. Same as PLISN (SAPLISHG) must be contained in this table as a PLISN (PLISNOHG) having an identical PCCN. The same as PLISN must be the lowest (EBCDIC value) PLISN in the table for the same Reference Number, CAGE, and PCCN combinations (without an associated “D” TOCC).

g.Repair Cycle Time (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, DRCTDDHG and CONRCTHG) for each Operations/Maintenance (O/M) Level (identified by the first position of the short name) must be either blank or greater for each higher O/M level. The O/M levels in ascending order are O, F, H, L, D, and CON (contractor).

h.When numeric, the Quantity Per End Item (QTYPEIHG) must be greater

than or equal to the Quantity Per Assembly (QTYASYHG).

i.Maintenance Task Distribution and Replacement Task Distribution.

(1)OMTDOOHG must be less than or equal to ORTDOOHG.

-96-

MIL-STD-1388-2B

APPENDIX A

(2)OMTDOOHG and FMTDFFHG must be less than or equal to ORTDOOHG and

FMTDFFHG.

(3)OMTDOOHG, FMTDFFHG, and HMTDHHHG must be less than or equal to ORTDOOHG, FRTDFFHG, and HRTDHHHG.

(4)OMTDOOHG, FMTDFFHG, HMTDHHHG, and LMTDLLHG must be less than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, and LRTDLLHG.

(5)OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG, and DMTDDDHG must be less

than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, LRTDLLHG, and DRTDDDHG.

j. Maintenance Task Distribution and Repair Cycle Time (RCT). When OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG and DMTDDDHG have an entry, then the corresponding RCT O/M subfield (identified by the first position of the short name) must also have an entry (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLHG, and DRCTDDHG).

k.An Allowance Item Quantity (ALIQTYHG) cannot be entered without an Allowance Item Code (ALLOWCHG).

l.When the Source, Maintenance, and Recoverability (SMR) (SMRCODHG)

source code is “PC”, the Shelf Life (SHLIFEHA) in table HA cannot be “O”.

m. If the SMR (SMRCODHG) Source Code is “PB”, then the Essentiality Code (ESSCODHG) cannot be “3”.

n. If LRU (LRUNITHG) is “Y”, then Essentiality Code (ESSCODHG) cannot be

“3”.

o. If the Special Maintenance Item Code (SMAINCHA) from table HA is “B”, and if RCT has entries, then there must be an entry in the contractor RCT (CONRCTHG). If CONRCTHG is entered, then SMAINCHA can only be “B”.

p. Maintenance Replacement Rate (MRR) I shall be calculated based on the Task Frequency (Table CA) and the Quantity per Task (Table CI). A change in any of these variables shall result in an update of the MRRI.

- 97 -

MIL-STD-1388-2B

APPENDIX A

120.8 Table HH, Overhaul-Kit Next Higher Assembly PLISN. This table contains all Next Higher Assembly (NHA), kit or overhaul PLISNS, any associated NHA PLISN Indicators, and Overhaul Replacement Rates. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB); LCN type (LCNTYPXB); and NHA PLISN (NHAPLIHH). NHA PLISN must be a PLISN contained in table HG (PLISNOHG) with an identical PCCN (PCCNUMXC).

120.9 Table HI. Provisioning Remark. This table contains text remarks associated with a part application for provisioning. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB); LCN Type (LCNTYPXB); and, Text Sequencing Code (TEXSEQHI).

-99-

MIL-STD-1388-2B

APPENDIX A

120.10 Table HJ, Provisioning Reference Designation. This table contains Reference Designations associated with a part application for provisioning. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB); LCN Type (LCNTYPXB); and, Reference Designation (REFDESHJ). Nonidentifying keys, Technical Manual (TM) Code (TMCODEXI); Figure Number (FIGNUMHK); and Item Number (ITEMNOHK) migrate from table HK, if applicable, on matching foreign keys.

120.11 Table HK. Parts Manual Description. This table contains Repair Parts Manual data associated with a part application for provisioning. Table keys include: Reference Number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB), LCN Type (LCNTYPXB); TM Code (TMCODEXI);

Figure Number (FIGNUMHK); and Item Number (ITEMNOHK). Item Number may be blank; all other keys are not null.

120.12 Table HL, Parts Manual Provisioning Nomenclature. This table contains text for repair parts manual data associated with a part application for provisioning. Table keys include: Reference number (REFNUMHA); CAGE (CAGECDXH); EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB), LCN Type (LCNTYPXB); TM Code (TMCODEXI); Figure Number (FIGNUMHK); Item Number (ITEMNOHK); and, Text Text Sequencing Code (TEXSEQHL).

- 100 -