You can also remove a vector extrusion by clicking the Clear extrude button on the property bar.

To apply a fill to a vector extrusion

1Select an extruded object with the Interactive extrude tool .

2Click the Color button on the property bar.

3Click one of the following buttons:

•Use object fill — applies the object’s fill to the extrusion.

•Use solid color — applies a solid color to the extrusion

•Use color shading — applies a gradient fill to the extrusion

You can apply an unbroken pattern or texture fill to an object by enabling the Drape fills check box before you click the Use object fill button.

To apply beveled edges to a vector extrusion

1Open the Interactive tools flyout , and click the Interactive extrude tool .

2Select an extruded object.

3Click the Bevels button on the property bar.

4Enable the Use bevel check box.

5Type a value in the Bevel depth box.

6Type a value in the Bevel angle box.

You can also set the bevel depth and angle by using the Interactive display box in the bevel list box.

You can show only the bevel and hide the extrusion by enabling the Show bevel only check box.

To add light to a vector extrusion

1Select an extruded object.

2Click the Lighting button on the property bar.