New products

Flat-field spectrometer

A flat-field spectrometer for the XUV/EUV/soft x-ray spectral range offers direct source imaging in a compact, modular device. Signal strength is approximately a factor of 20 times higher than with slit-type systems. Applications include plasma and attosecond research, as well as fusion technology and extreme UV source calibration.

H+P Spectroscopy

Mannheim, Germany

www.hp-spectroscopy.com

Dual-wavelength laser

The Chameleon Discovery high-power, dual-wave- length laser is designed for multiphoton excitation microscopy. It is continuously tunable from 680 to 1300 nm, with short pulsewidth (100 fs) and power up to 1.4 W, while simultaneously providing 1.5 W of output at 1040 nm. An internal, automated Group Velocity Dispersion (GVD) pre-compensator enables

the shortest possible pulsewidth at the sample.

Coherent

Santa Clara, CA

www.coherent.com

The STM7 measur-

ing microscope is an industrial microscope system that measures machined parts, semiconductors, and electronic components. Featuring a UIS2 infinity-corrected optical system, brightfield, darkfield, differential image contrast, and polarization microscopy images can be observed with high resolution and contrast, and with no aberrations.

Olympus

Center Valley, PA

http://olympus-ims.com

Simulation software

Multiphysics software version 5.0 now includes an Application Builder for use by engineering and manufacturing departments. Three new add-on products include the Ray Optics Module, the Design module with expanded CAD tools, and LiveLink for Revit, allowing the user to interface with Autodesk.

COMSOL

Burlington, MA

www.comsol.com

New products

Picosecond pulsed LED

The EPLED 310 picosecond pulsed LED is pre-adjusted for an optimum pulse width of <800 ps and optimized for time-correlated single-photon count-

beams. The sensors are designed for powers from 100 µW to 50 W and rely on the company’s thermoelectric technology, eliminating saturation problems and wavelength-dependent sensitivity. greenTEG

Zürich, Switzerland www.greenteg.com

Bandpass filters

Enhanced-performance dichroic filters for laser applications, available on www.ealingcatalog.com, feature an ion beam-sputtered coating that maintains stability with changes in heat, humidity, and pressure. The coating delivers very high transmission for long-pass wave-

reflections. Features include high power capability (500 W/cm2 for continu- ous-wave lasers and 150 MW/cm2 for pulsed lasers), an operating range of 1020–1100 nm, an 8 mm aperture, isolation >30 dB, and transmission >92%.

ConOptics

Danbury, CT www.conoptics.com

ing (TCSPC). Typical instrumentation applications include fluorescence lifetime spectrometers and fluorescence lifetime multiwell plate readers.

Edinburgh Instruments Livingston, West Lothian, Scotland www.edinst.com

Variable magnification telecentric lenses

TECHSPEC Variable Magnification Telecentric Lenses are available in 0.5X– 1.0X and 1.0X–3.0X options and feature resolutions of >20% @ 75 lp/mm across fields of view ranging from 2.93 to 17.96 mm. These adjustable f/6 lenses exhibit

New products

typical telecentricity of <0.1° and distortion of <0.1% at 588 nm.

Edmund Optics

Barrington, NJ www.edmundoptics.com

Module for spectroscopy software

The MultiWell module for the LabSpec 6 Spectroscopy Suite is an add-on for the company’s Raman microscopes equipped with standard x-y stages. It transforms the microscopes into high-

throughput chemical analyzers, coupling nondestructive, chemically rich analysis with high sample turnaround.

Horiba Scientific Edison, NJ

www.horiba.com/labspeed

LED light source

The GL OPTI LIGHT LED 127 is a programmable, integrating-sphere-based uniform LED light source. Designed for

VCSELs

Highest Efficiency >63%

Highest Reliability

Very Narrow Band Emission

For all types of illumination3D Imaging, Gesture Recognition, Pumping, Automotive LIDAR

Our VCSEL Key Differentiators:

•Low cost surface mount packaging

•High efficiency (>63% and improving)

•High powerkW from one chip

•High reliabilityMTTF of >100 years

•High temperature operation to 950C

•650, 680,780, 808, 830, 850, 976, 1064nmother custom wavelengths

Structured light projector output for 3D depth sensing

2kW-808nm VCSEL side

pumping1kW power

VCSEL module

Illuminator

Making multikW illuminators as well

Applications:

•IR Illumination (works like LEDs, but with very high efficiency at high temperature)- for short and long range imaginglow power to kWs illuminator

•High Reliability Solid-state laser pumping (chips, high power modules for end and side pumping)

•Sensor applications, single mode devices (mW to 5W single mode)

•Printing and Industrial heating

•Frequency doubled green lasers

www.princetonoptronics.com

sales@princetonoptronics.com

use in cameras for consumer electronics, it uses proprietary LED technology in a patented multilevel calibration system. Features include closed-loop calibration, an electronic control system, and thermal stabilization for colorimetric stabilization.

GL Optic Teck, Germany

www.gloptic.com

Pulsed laser diode

The CVLL 350-CL90 1550 nm pulsed laser diode has an integrated micro-lens that delivers a far-field beam pattern.

kW power to drive standard aluminum glow rods for ionization bombardment of substrates prior to a range of vacuum coating processes. They may also be used to provide DC bias to substrates in sputter systems.

YTI Ashford, CT

www.ytionline.com

Edge-grip optic mount

The HM-1 Edge Grip Optic Mount uses a patent-pending Edge Grip mounting mechanism to hold the optic near to its edge. This technique allows for easy

installation and removal of optics and a smaller mount size. It can hold 1 in. round or square filters, beamsplitters, or mirrors.

Newport

Irvine, CA www.newport.com/edgegrip

Picosecond excitation laser

The Katana-05/06 HP picosecond pulsed excitation laser delivers 532 and 635 nm wavelengths; when combined with the Katana-08 HP 775 nm depletion laser, they have use as stimulated

emission depletion (STED) lasers for super-resolution microscopy. The combination setup delivers a tunable pulse repetition rate from pulse on demand

New products

up to 120 MHz, while pulse duration can range from sub-20 ps up to 1 ns, yielding efficient results for several dyes.

Onefive

Zürich, Switzerland www.onefive.com

UV-VIS-NIR spectrophotometer

The UV-3600 Plus UV-VIS-NIR spectrophotometer is equipped with three detectors— photomultiplier tube (PMT) for the UV and visible regions,

and indium gallium arsenide (InGaAs) and cooled lead sulfide (PbS) detectors for the NIR region. A double monochromator attains a low stray-light level (0.00005% max at 340 nm).

Shimadzu Columbia, MD

www.ssi.shimadzu.com

Laser power sensor

The 1000WP-BB-34 high-power, watercooled thermal sensor measures powers from 5 to 1000 W, energy from 400 mJ to 300 J, and spectral range from 190

Optical Metrology

The Entire Spectrum

ATS Series

• Alignment turning stations

ImageMaster®

• MTF measurement stations

OptiCentric®

•Systems for optical centration measurement and alignment

OptiSurf ®

•Center thickness measurement instruments

OptiSpheric® & Spherometer

• Optical test systems

PrismMaster® & SpectroMaster

• Goniometer-spectrometers

ProCam® Align

•Active alignment, mounting and final testing of camera modules

TriAngle

• Electronic autocollimators

WaveMaster® & WaveSensor®

• Wavefront sensors

µPhase®

• Interferometers

Booth #1833

New products

nm to 20 μm. All materials that come in contact with the cooling water are either copper or nonmetallic, eliminating contamination or corrosion.

Ophir Photonics

North Logan, UT www.ophiropt.com/photonics

Broadband supercontinuum laser

The Solea White supercontinuum laser emits between 480 and 700 nm from a polarization-maintaining singlemode fiber with a FC/PC connector. Average spectral output reaches more than 250 mW at a 40 MHz repetition rate, which corresponds to an average spectral density of 0.4 mW/nm. The laser can be externally triggered at any repetition rate between 1 and 40 MHz, permitting synchronization with other lasers for multicolor excitation schemes.

PicoQuant Berlin, Germany

www.picoquant.com

Fiber workstation

The CW-5000 workstation fabricates heated and drawn fiber-optic products, including multiport biconical fused couplers and WDMs, fiber tapers, power combiners, and many types of custom

fiber processing. It has interchangeable platforms, optional gas/heating nozzle configuration, and software controls.

A new hydrogen generator system enhances portability.

Lightel Renton, WA

http://lightel.com

High-speed cameras

The v-Series line of 1 Mpixel highspeed cameras includes the Phantom v2011, v1611, and v1211 cameras. They offer sensitivity as high as ISO

6400 (daylight illumination) for color images and ISO 32,000 for monochrome images. They have use in lowlight and difficult-to-light scenarios.

Vision Research Wayne, NJ

www.visionresearch.com

Photodiodes

SXUVPS4 photodiodes withstand up to four days of exposure to 10 eV/1016 photons/cm2 without responsivity degradation. Suited for laser alignment applications, they provide

0.125 to 0.02 A/W over a 10 to 200 nm wavelength range. The large circular detection surface is optimized for alignment of lasers with four elements, each offering a 1.25 mm2 active area.

Opto Diode

Camarillo, CA www.optodiode.com

Linear stage

The M-417 linear stage provides 500 mm travel and 0.5 μm resolution. This motorized precision positioner can be computer-controlled for automation and precision assembly applications.

An incremental optical rotary encoder with 4000 counts/r controls the position, providing unidirectional repeatability of 0.5 µm.

PI (Physik Instrumente) Auburn, MA www.pi-usa.us

Vacuum-based CCD

The Eagle V deep-cooled, vacuumbased CCD uses proprietary PentaVac vacuum technology. It uses a 4 Mpixel CCD42-40 back-illuminated AIMO

sensor with 13.5 × 13.5 μm pixels and a full well capacity of 100,000 e- for photon collection. It has use in highresolution fluorescence imaging, adaptive optics, and astronomy applications.

Raptor Photonics Larne, Northern Ireland

www.raptorphotonics.com

Optical test board

The second-generation VHXT6212A-840 300 Gbit/s high speed parallel optical transmitter and receiver test boards are designed for short-reach data communication. The high-speed optical link devices are based on 850 nm vertical-cavity sur- face-emitting (VCSEL) transmitter chip arrays and p-i-n photodetector arrays, which are fiber-coupled to multimode ribbon fiber.

VI Systems Berlin, Germany

www.v-i-systems.com

LWIR camera

The Serval thermal longwave infrared (LWIR) camera offers a scalable detector size of 384 × 288 or 640 × 480 pixels, a large choice of lens configurations, and optional cooling on

its housing, all combined with a very small form factor. Designed for industrial vision in harsh environments, the maintenance-free camera comes with an IP67 protection-grade enclosure.

Xenics

Leuven, Belgium www.xenics.com

Machine vision lasers

The ZM18 series machine vision lasers use new driver electronics for improved power stability. The ZM18S3 provides a modulation frequency (TTL) up to 500 Hz and the ZM18H3 power-sta-

bilized laser has green or blue emitting diodes with automatic power control. In the NIR, maximum optical output is up to 200 mW (830 nm).

Z-Laser

Freiburg, Germany www.z-laser.com

4K video camera

The IK-4K UltraHD 4K 3-chip video camera provides 8 Mpixel, 3840 × 2160 pixel output. With proprietary prism block technology, it features