Intel Desktop Board D845EPI Technical Product Specification
1.10.2Audio Subsystem Software
Audio software and drivers are available from Intel’s World Wide Web site.
For information about |
Refer to |
Obtaining audio software and drivers |
Section 1.3, page 16 |
|
|
1.11 LAN Subsystem (Optional)
The Network Interface Controller subsystem consists of the ICH4 (with integrated LAN Media Access Controller) and a physical layer interface device. Features of the LAN subsystem include:
•PCI Bus Master interface
•CSMA/CD Protocol Engine
•Serial CSMA/CD unit interface that supports the 82562ET (10/100 Mbit/sec Ethernet)
•PCI Power Management
Supports ACPI technology
Supports LAN wake capabilities
1.11.1Intel® 82562ET Platform LAN Connect Device
The Intel 82562ET component provides an interface to the back panel RJ-45 connector with integrated LEDs.
The Intel 82562ET provides the following functions:
•Basic 10/100 Ethernet LAN connectivity
•Supports RJ-45 connector with status indicator LEDs on the back panel
•Full device driver compatibility
•ACPI support
•Programmable transit threshold
•Configuration EEPROM that contains the MAC address
1.11.2RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector. Table 6 describes the LED states when the Desktop Board is powered up and the LAN subsystem is operating.
Table 6. |
LAN Connector LED States |
||
|
|
|
|
LED Color |
|
LED State |
Condition |
Green |
|
Off |
10 Mbit/sec data rate is selected. |
|
|
On |
100 Mbit/sec data rate is selected. |
Yellow |
|
Off |
LAN link is not established. |
|
|
On (steady state) |
LAN link is established. |
|
|
On (brighter and pulsing) |
The computer is communicating with another computer on |
|
|
|
the LAN. |
28