Table 2.3: Composition Software

№	Name of software	Number of licenses		Note
1	Server software system-wide	2		Corporate License Customer
2	Application server software	2		Corporate License Customer

2. Technical data table

The following table specifications must be completely filled by the Bidder and submitted together with the tender offer Customer.

Features and guarantees included in these tables should be part of the contract and be binding. Without the written consent of the deviations from the requirements of the customer are not permitted.

Bidder shall provide all the necessary directories and data to fully describe the proposed equipment, machinery, tools, devices and materials.

Bidder shall be liable for any errors, inconsistencies or omissions in its proposed characteristics in the tables of technical requirements.

Bidders should be aware that incomplete answers to questions indicate non-compliance of the Customer (the requirements of the Contract), and it could result in the refusal of the Customer from such tender offers.

Bidders in its tender offer must confirm whether they offer the customer requirements in general (without any deviation) or not.

If there are deviations or variations, they must be described and explained in the tables for each position in the column "Remarks" or on a separate sheet.

All deviations from the specifications of the Customer shall be marked clearly identified and given in a separate annex, otherwise the customer will be in the evaluation has been suggested that the proposal does not fully comply with these specifications.

Before signing the deviation must be agreed with the customer.

Table 5.1 Technical requirements for electronic multifunction electricity meter

№	Technical characteristics (parameter name)	Customer Requirements	Proposed Participant		Note
1.	Standards	GOST 30206-94 (IEC 687-92) (active power); GOST IEC 62053-23:2012 (reactive power); ІЕС 62056 (optical communication) DLMS COSEM (communication protocol)
2.	Manufacturer	*
3.	Symbol (Brand)	*
4.	Climatic conditions and resistance to climatic factors influencing
	Operating temperature range	-40°С..+70°С
5.	Requirements for electrical parameters of electric power
	Nominal frequency of the electrical network, Hz	50
	Rated voltage	3x57,7/100;.......; 240/415V, smooth range
	Rated current, A	1; 5
	Maximal current , A	2; 10
6.	The accuracy requirements of electricity
	concerning the measurement of active energy	0.5s; 0.2s
	concerning the measurement of reactive energy	not worse 2.0
7.	the accuracy of the internal clock counter	± 0,5 sec/day
8.	Switching Interfaces RS232 and RS485	Yes
9.	Power requirements of electricity
	internal power supply, which is connected to the input voltage circuits	Yes
	possibility of power supply from the external (backup) source of DC voltage or AC	Yes

* - parameters should be provided by the manufacturer.

SECTION VI. BLUEPRINTS