Cadence / DSD2 / Конспект -Введение в Cadence DSD2 / Конспект -Введение в Cadence DSD2 / введение_cad / schematic.7
.htmlCadence Tutorial
Example : Schematic Capture (CMOS Inverter) Step 7 : Check and Save
1. Click Design on the menu banner and then select Check and Save.
During this tutorial, you may save your design selecting Save on the Design menu. It is also strongly advised that you save your designs frequently, every time after you make significant changes, so that you don't loose your data because of a computer crash or because of a mistake that can happen in a complicated design environment such as this one.
2. Check the message field in the CIW window to see the error and the warning messages.
You can see the message in the screen-shot above indicating that there is no error in our schematic. If this wasn't the case, the errors would have been listed in this window. Check the message field every time you save a design.
a production of
Cadence is a trademark of Cadence Design Systems, Inc., 555 River Oaks Parkway, San Jose, CA 95134.
Please read this DISCLAIMER
Last Updated by Ilhan Hatirnaz on 10/31/1998