Cadence / DSD2 / Конспект -Введение в Cadence DSD2 / Конспект -Введение в Cadence DSD2 / введение_cad / simulation-1

Cadence Tutorial

Navigation Help Click on this button to proceed to the next step of the current example.

Click on this button to go to the previous step of the current example.

Click on this button to return to the beginning of the current example.

Click on this button to go to the introduction page of the corresponding design stage.

Click on this button to go to the design flow diagram.

Note: All figures on the Example pages can be enlarged by clicking on the corresponding figure in the page.

Example : Simulation

The basic steps to simulate a design are the following:

Open a new schematic design Select and place components (circuit symbol to be simulated) Select and place components (test-bench elements) Wire components Define the voltage sources Determine the output load Open the simulator window Edit your simulation parameters Run the simulation Re-run the simulation

a production of

Cadence is a trademark of Cadence Design Systems, Inc., 555 River Oaks Parkway, San Jose, CA 95134.

Please read this DISCLAIMER

Last Updated by Ilhan Hatirnaz on 10/31/1998