Step 7 Creating Pupil

We will now work on the pupil.

1. Make a sphere using the "Ellipse Tool", click and drag, make a rational size for the eye body

2. Draw a 2nd circle, make it smaller than the main circle and color it black

3. Distort it by select the small circle and use the "Interactive Distortion Tool" (you can find it in the left bottom toolbar), left click and drag it. After that set the distortion type to "Zipper Distortion" - Enter the value "distortion amplitude" to 48 and "distortion frequency" to 30

Step 8 Coloring the Pupil

Colorize the big circle,

select the big circle with the "Pick Tool",

go to the "Fountain Fill Tool" (it's in the left bottom toolbar or press F11).

Set the fill type to radial, set the color in the left and middle left to custom color or others with the value of C 96 M 73 Y 35 K 4 and set the color in the right and middle right to Sky Blue.

Step 9 Creating texture

Now, add a texture to the big circle

1. Make two boxes with the "Rectangle Tool", make a small size with a position like in the picture below, select the boxes and press "Control + Q " so you can edit the nodes in order to shape it.

2. Shape them using the "Shape Tool", after that select both of the shapes, using the "Pick Tool" by left clicking and dragging. Press "Control + G " to group both of them .

3. After that, click the two boxes that you have shaped and double click until you see a rotating arrow

- after that hold "Left Click + Right Click + Control" together drag and rotate them clockwise then release the buttons

- now you see that the shape is duplicated, but you need to duplicate them again by pressing "Control + D" until you have a shape like in the picture below.

4. Done

Step 10 Coloring the Texture

Now let's colorize the shape.

Left Click the shape with the "Pick Tool",

go to the "Fountain Fill Tool" (its in the left bottom toolbar or press F11).

Set the fill type to Radial and set the Color in the left to a custom color or others with the value of "C 96 M 73 Y 35 K 4"

and Set the color in the right to Cyan.

Step 11 Duplicating the Texture

Select the shape by click using the "Pick Tool"

1. Copy, rotate and duplicate by holding "Left Click + Right Click + Control", drag and rotate them clockwise.

2. After that click the smaller shape and color them black, select both big and smaller shape with the "Pick Tool", group them by pressing "Control + G" and drag them to the center

3. Done

Step 12 PowerClip Container

Put the pupil into the eye body

1. Group the pupil by selecting it with the "Pick Tool" then press " Control + G"

2. Place the pupil inside the eye body container by using "PowerClip", go to the top toolbar find "Effect + PowerClip + Place Inside Container ". You will now see your cursor turning into a black arrow, click the eye body. Now you will see that the pupils are inside the eye body container.

3. Edit the container by pressing "control + double click" to the eye body container, click the pupil and drag them a up so it looks natural. Finish editing the container by pressing "control + double click" again on any position inside the container.

4. Done