Digital

Video Recorder

Software Manual

● Manual Version : V 1.60

● Software Version : After V 1.59

NOTICE

The notices & warnings below are very important to keep the user’s safety, so users must follow them. Please check the matters below before installing or operating the system.

Warning & Notice * Warning : It explains the cases that the user could die or get injured seriously,

if the user does not install or operate the system properly. * Notice : It explains the cases that the user could get injured or property damage

could occur, if the user does not install or operate the system properly.

General warnings & notices * Warnings 1. See installation instructions before connecting to the power supply. Adjust power input selector switch correctly. (115V or 230V) The mark “115” on the switch means 100-120 V a.c., “230” means 200-240 V a.c. 2. Use the power code supplied with the system set or specified one. Incorrect power code could cause fire.

3. Do not disassemble or remodel the system. Disassembled or remodeled system could cause breakdown, electric shock, and

fire. 4. Repairing should be requested to the store where the user bought the system. Repairing at the customer’s discretion or incorrect repairing could cause electric

shock or fire. 5. Do not put a vase or cup that contains liquid on the system. If any liquid goes into the system, stop the system operation and off the power. Then inform the store where the user bought the system. 6. Do not control the system with wet hands. The user could get electric shock or the system could get breakdown. 7. System installation, moving, or reinstallation should be requested to experts. Installation, moving or reinstallation at the customer’s discretion could cause

breakdown, electric shock, and fire.

8. Ground connection construction must be done. If it is not constructed, it could cause the system breakdown or electric shock. 9. The ground connection line should not touch or be connected to a gas pipe,

water pipe, and telephone line. Imperfect construction could cause electric shock.

10. Be careful not to put metal material in the system. It could cause fire.

11. Do not spray insecticide or inflammable material while the system is in

operation. The materials above could cause fire. 12. Do not use water, thinner, and organic solvent and clean with dry cloth. Water, thinner, and organic solvent could cause breakdown or electric shock.

13. When the user finds burning smell, smoke, or unusual sound, stop the system

operation and off the power.

Then inform the store where the user bought the system. If the user keeps the system operating with the unusual sign above, it could cause breakdown, electric shock, and fire.

* Notices 1. Do not use the prevented external terminal.

Internal pan is rolling in high speed, so it could cause an accident. 2. Do not fall the system or give it strong shock.

It could cause breakdown. 3. Front and back side air entrance should be open. Or the system breakdown could be occurred due to the high temperature inside of

the system. 4. Do not touch the system or power code while lightning. It could cause electric shock. 5. Do not install the system near or on the heater or fire system. The system breakdown could be occurred due to the high temperature inside of the

system. 6. Do not install the system on inclined, unstable place or where the system gets

shocked easily. Installing on the places above could cause the system breakdown. 7. Use the correct Backup battery of Mother Board. Incorrect type could cause explosion. Follow the below instruction when remove the used battery. - Turn off the system power. - Remove the power code. - Replace the old battery with a new correct type battery.

Warnings and Notices about the power * Warning 1. The ground connection outlet must used to connect the power code. Improper power code connection could cause fire. 2. Do not connect the system to the middle of power code or use extended code. Improper connection could heat the system and cause fire.

3. Do not touch the power code with wet hands.

It could cause electric shock.

4. Be careful not to wet the power code with humidity. Humidity could cause electric shock or fire.

The power code is not waterproof.

5. Pull out the power plug with holding the body of it.

If the user pulls the wire, it could be disconnected and cause fire.

6. Check the power plug regularly.

Humidity, insulating, inferior goods could cause fire.

7. Pull out the power plug when the user does not use the system for a long time.

Or it could causes electric shock or electric leak.

* Notices

1. Do not off the power with pulling the power plug.

If the user wants to off the power, press the power button in front part of the system.

If the system shuts down unusually and the power button does not work, press the

power button for more than 4 seconds to off the power.

2. Do not off the power or give strong shock to the system while the hard disk is

operating.

Unusual power off or strong shock could cause hard disk breakdown or data loss.

Contents

■ Chapter 1: Video surveillance mode