6.10.1 Retrieve Logs

See also 6.6.3.3 (under Data Logging).

Figure 89–Retrieve Logs web interface window

6.10.2 Manage Configuration File

The Supervisor may exclude settings and groups of settings when applying changes. A partial configuration file

may also be generated and sent to CXC (v1.81 and above).

NEW!

for version 2 software

Tap the Print Configuration

button to evoke a standard

print dialog window.

Figure 90–Manage Configuration File web interface window

0350046-J0 Rev C

Page 87 of 127

Refer to the back of this manual for Factory Service and Technical Support contact information

6.10.2.1 Printing Custom Site Configuration

Right-click in the window showing the settings and be careful to then select Print Preview. See

Figure 91 below:

Figure 91–Logs & Files “Print Preview” (web interface)

CAUTION

By default the browser will print out all settings requiring approximately 50 letter-size

pages.

Continue with the page setup and print dialog as required. You may reduce the page range or

print to PDF if your workstation is configured to do so.

6.10.3 Manage Dynamic (Editable) Text Files

Use pull-down menu

to access text list

Edit the items as

required, then tap

“Submit Alarm Text

Changes” button

0350046-J0 Rev C

Figure 92–Manage Editable Text Files web interface window

For dynamic text files,

only this submit button

is used.

The “Submit Changes”

button at the top of the

web interface applies to

all other allowable

changes.

Page 88 of 127

Visit the Alpha website at www.alpha.ca for the latest manual and product downloads

6.10.4 Manage Language Files

Language files can be uploaded via web interface. The CXC can be set up for a maximum of three language files

(default plus two others) at one time pending availability.

Figure 93–Manage Language Files web interface window

6.10.5 Retrieve Diagnostic File

A new feature in version 2.05 will collect diagnostic information about the system in the event of an Improper

Shutdown. This is saved in a diagnostic file on the system and may be downloaded at a later time and sent to

Alpha Technical Support to help analyze the problem that occurred. No configuration is required for this feature to

function. In order to send a diagnostic file to Alpha, it must be downloaded from the Logs and Files -> Retrieve

Diagnostic File menu on the webpage.

Note that only one diagnostic file is saved on the CXC system. Therefore, when downloading the diagnostic file

only the information about the latest error is retrieved. Therefore, it is important to save the file as soon as

possible after an error has occurred. Otherwise, the file may be overwritten by a subsequent Improper Shutdown.

6.11

Supervisor

This menu category displays only when logged in with Supervisor level access. The web interface enables two

levels of password protection: User and Supervisor. The same password cannot be used for both.

0350046-J0 Rev C

Page 89 of 127

Refer to the back of this manual for Factory Service and Technical Support contact information