Cadence / DSD2 / Конспект -Введение в Cadence DSD2 / Конспект -Введение в Cadence DSD2 / введение_cad / symbol.5

Cadence Tutorial

Example : Creating a Symbol Step 5 : Check and Save

1. To check and save the symbol, choose Check and Save from the Design menu :

( Design --> Check and Save )

While editing the symbol, you can use only Save, which does not check anything. At this point, checking a symbol means comparing the symbol view with the corresponding schematic view, by matching all of the pin names. This occurs only when you click on Check and Save.

a production of

Cadence is a trademark of Cadence Design Systems, Inc., 555 River Oaks Parkway, San Jose, CA 95134.

Please read this DISCLAIMER

Last Updated by Ilhan Hatirnaz on 10/30/1998