Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
69
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

DOOR OPENING SCUFF PLATES

REMOVAL (FIG. 24)

(1)Open front door.

(2)Remove screws holding scuff plate to door sill.

(3)Separate scuff plate from vehicle.

INSTALLATION

Reverse the preceding operation.

A-PILLAR AND ROOF RAIL MOULDINGS

A-PILLAR MOULDING REMOVAL (FIG. 24)

(1)Open front door.

(2)Remove push-in fasteners holding A-pillar moulding to roof rail above door opening.

(3)Remove trim plug and screw holding A-pillar molding to A-pillar

(4)Slide A-pillar moulding upward and pull rearward to separate moulding from A-pillar.

A-PILLAR MOULDING INSTALLATION

Reverse the preceding operation.

LOWER QUARTER TRIM PANEL

REMOVAL (FIG. 24)

(1)Remove tail panel trim cover and security shade, if equipped

(2)Remove rear seat cushion and backs.

AG-BODY 23 - 61

(3)Remove seat back latch striker bezel.

(4)Remove screw covers. Remove screws holding lower quarter trim panel to quarter.

(5)Pull rearward end of trim panel away from quarter panel and push trim forward to clear door opening flange.

(6)Separate lower quarter trim panel from vehicle.

INSTALLATION

Reverse the preceding operation.

UPPER QUARTER TRIM PANEL

REMOVAL (FIG. 24)

(1)Remove lower quarter trim panel.

(2)Remove rear seat shoulder harness turning loop

cover.

(3)Remove bolt holding belt turning loop to C-pillar.

(4)Remove bolt holding front seat belt to floor at door sill.

(5)Remove screw holding coat hook to roof rail.

(6)Remove roof rail moulding as necessary to clear quarter panel removal path.

(7)Remove push-in fastener holding upper quarter trim to roof rail.

(8)Remove screw covers from trim panel to gain access to screws.

Fig. 24 Interior Mouldings, Panels, and Trim Covers

Соседние файлы в папке FWD