Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
69
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

 

AG-BODY 23 - 55

 

Fig. 8 Cowl Cover Assembly

(4) Separate wheelhouse splash shield from vehicle.

INSTALLATION

Reverse the preceding operation.

TRANSAXLE SPLASH SHIELD REMOVAL (FIG. 9)

(1)Remove one front wheelhouse splash shield push-in fastener and separate wheelhouse splash shield from transaxle splash shield.

(2)Remove transaxle splash shield attaching bolts and separate transaxle splash shield from vehicle.

TRANSAXLE SPLASH SHIELD INSTALLATION

Reverse the preceding operation.

Fig. 9 Front Wheelhouse and Transaxle Splash

ShieldsÐTypical

ENGINE DRIVE BELT SPLASH SHIELD REMOVAL (FIG. 10)

(1)Hoist vehicle and support on suitable safety stands.

(2)Remove bolts holding engine drive belt splash shield to right frame rail.

(3) Separate drive belt splash shield from vehicle.

ENGINE DRIVE BELT SPLASH SHIELD INSTALLATION

Reverse the preceding operation.

Fig. 10 Engine Drive Belt Splash ShieldÐTypical

FRONT FENDER

REMOVAL (FIG. 11)

(1)Remove front side marker lamp assembly. Refer to Group 8L, Lamps for instructions.

(2)Remove front bumper as necessary to gain clearance to remove front fender. Refer to Front Bumper Removal paragraph in this section.

(3)Remove front wheelhouse splash shield. Refer to Front Wheelhouse Splash Shield Removal paragraph of this section.

(4)Remove side applique as necessary to clear front fender. Refer to Body Side Applique Removal paragraph in this section.

(5)Remove bolts holding bottom of front fender at rear of wheel opening.

(6)Remove bolt holding front fender to hinge pillar at rear of wheelhouse.

(7)Remove bolt holding front fender to cowl at top of front door opening.

(8)Remove bolts holding front fender to underside of radiator closure panel.

(9)Remove bolts holding front fender to front of radiator closure panel.

(10)Raise hood and support hood on a suitable holding device. Mark hinge for installation indexing. Remove lower hood hinge attaching bolts and separate hinge from front fender. Refer to Hood Hinge Removal paragraph in this section.

(11)Remove bolts holding front fender to inner wheelhouse along hood opening.

(12)Separate front fender from vehicle.

INSTALLATION

Reverse the preceding operation. Align front fender to achieve a 4 mm (0.160 in) gap to hood edge and 6

Соседние файлы в папке FWD