Fig. 2 Grille Opening PanelÐAC/D Body

GRILLE AC/C BODY

GRILLE REMOVAL (FIG. 3)

(1)Loosen hidden screws holding grille to grille opening panel at corners of grille. The screws are captured in a clearance hole covered by a bracket behind the grille.

(2)Pull grille forward from grille opening panel.

GRILLE INSTALLATION

Reverse the preceding operation.

Fig. 3 GrilleÐAC/C Body

HOOD ORNAMENT AC/C

HOOD ORNAMENT REMOVAL (FIG. 3)

(1)Remove grille.

(2)Locate hood ornament spring under grille opening panel header.

(3)Compress hood ornament spring enough to clear hooks on end of retaining wire.

(4)Squeeze retainer wire hooks together and push hooks inside spring.

(5)Rotate spring counterclockwise to separate spring from retainer.

(6)Separate hood ornament from grille opening panel.

HOOD ORNAMENT INSTALLATION

Reverse the preceding operation.

GRILLE OPENING PANEL AC/C BODY

For service procedures for headlamp related components refer to Group 8L, Lamps.

REMOVAL (FIG. 4)

(1)Remove front bumper.

(2)Remove front end splash shields as necessary to gain access to behind fenders.

(3)Remove nuts holding mouldings to front fend-

ers.

(4)Remove bolts holding mouldings to bottom of grille opening panel and separate mouldings from vehicle.

(5)Remove nuts holding grille opening panel to front fenders.

(6)Disconnect concealed headlamp motor wire connector.

(7)Disconnect headlamp wire connectors.

(8)Remove bolts holding grille opening panel to radiator closure panel.

(9)Separate grille opening panel from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 4 Grille Opening PanelÐAC/C Body

HOOD AND HINGES

HOOD REMOVAL (FIG. 5)

(1)Raise hood to full up position.

(2)Disconnect the under hood lamp wire connector.

(3)Mark all bolt and hinge attachment locations with a grease pencil or other suitable device to provide reference marks for installation. When install-