Добавил:
Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз: Предмет: Файл:
FWD / 92FWD_23.PDF
Источник:
Скачиваний:
69
Добавлен:
19.03.2015
Размер:
5.12 Mб
Скачать

Ä

(3)Remove bolt holding seat belt to floor below B-pillar.

(4)Lift B-pillar trim off door opening sill weatherstrips and push inward.

(5)Slide B-pillar trim downward as far as possible and separate trim from B-pillar.

B-PILLAR TRIM PANEL INSTALLATION

Reverse the preceding operation.

QUARTER TRIM PANEL

REMOVAL (FIG. 39)

(1)Remove roof rail mouldings and scuff plates as necessary.

(2)Remove shoulder harness turning loop cover. Remove bolt holding turning loop to quarter panel.

(3)Remove rear seat cushion, back, and rear bol-

ster.

(4)Remove push-in fastener holding quarter trim to roof rail.

(5)Remove screws holding quarter trim panel to wheelhouse kickup.

(6)Pull trim panel forward and separate from ve-

hicle.

INSTALLATION

Reverse the preceding operation.

QUARTER EXTENSION TRIM PANEL

REMOVAL (FIG. 39)

(1) Remove rear seat cushion, back, and rear bolster.

AA-BODY 23 - 27

(2)Disengage clips holding expansion trim panel to shelf panel.

(3)Separate trim panel from vehicle.

INSTALLATION

Reverse the preceding operation.

REAR SHELF TRIM PANEL

REMOVAL (FIG. 39)

(1)Remove one quarter trim panel.

(2)Remove center high mounted stop lamp cover. Refer to Group 8L, Lamps for instructions.

(3)Disengage frog leg fasteners holding trim to shelf panel and separate trim from vehicle.

INSTALLATION

Reverse the preceding operation.

FRONT SEAT BELTS

OUTBOARD SHOULDER HARNESS/LAP BELT REMOVAL (FIG. 40)

(1)Remove B-pillar trim panel.

(2)Remove bolt holding seat belt retractor to B-pillar.

(3)Separate retractor from vehicle.

OUTBOARD SHOULDER HARNESS/LAP BELT INSTALLATION

Reverse the preceding operation.

Fig. 39 Interior Mouldings, Panels, and Trim Covers

Соседние файлы в папке FWD