23 - 20 AA-BODY

REAR DOOR TRIM PANEL

DOOR TRIM PANEL WITH POWER WINDOWS REMOVAL (FIG. 24)

(1)Move glass to down position.

(2)Disconnect battery negative cable.

(3)Remove screw holding latch release handle bezel to door. Slide bezel forward and separate from door trim.

(4)Remove ash tray. Remove screw holding trim panel to door from ash tray opening.

(5)Pry power window switch from retainer in door trim and disconnect wire connector.

(6)Using a suitable trim clip tool, disengage frog leg clips at the ends and bottom of trim panel. After all trim clips are loose, push inward at the top of the trim panel and lift upward to disengage barb fasteners at top of panel. Separate trim from door.

DOOR TRIM PANEL WITH POWER WINDOWS INSTALLATION

Reverse the preceding operation.

Fig. 24 Rear Door Trim Panel with Power Windows

DOOR TRIM PANEL WITH MANUAL WINDOWS REMOVAL (FIG. 25)

(1)Move glass to down position.

(2)Remove screw holding latch release handle bezel to door. Slide bezel forward and separate from door trim.

(3)Remove ash tray. Remove screw holding trim panel to door from ash tray opening.

(4)Pry window crank cap from crank. Remove screw holding crane to regulator and separate from door

(6)Using a suitable trim clip tool, disengage frog leg clips at the ends and bottom of trim panel. After all trim clips are loose, push inward at the top of the trim panel and lift upward to disengage barb fasteners at top of panel. Separate trim from door.

Ä

DOOR TRIM PANEL WITH MANUAL WINDOWS INSTALLATION

Reverse the preceding operation.

Fig. 25 Rear Door Trim Panel with Manual Window

REAR DOOR SILENCER AND WATER SHIELD

REMOVAL (FIG. 26)

(1)Remove door trim panel.

(2)Remove push-in fasteners holding silencer pad to door inner panel and separate silencer from door.

(3)Pull water shield from adhesive around perimeter of door inner panel.

INSTALLATION

Reverse the preceding operation.

Fig. 26 Rear Door Silencer and Water Shield

REAR DOOR AND HINGE

The rear door hinge is welded to the door and bolted to the B-pillar. The door half of the hinge pivots on a removable hinge pin. The hinge pin is driven in from the bottom on the top hinge and from the top on the bottom hinge. All adjustments to the hinge are performed on the hinge pillar half of the