Fig. 20 Front Door Lower Channels

(2)Raise glass to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.

(3)Remove bolts holding window regulator to inner door panel.

(4)Slide roller from window lift channel. Rotate regulator

to bring lift arm through access hole first.

(5)Remove regulator assembly from door.

MANUAL WINDOW REGULATOR INSTALLATION

Reverse the preceding operation.

Fig. 21 Front Door Window RegulatorÐManual

FRONT DOOR WINDOW REGULATOR/POWER

POWER WINDOW REGULATOR REMOVAL (FIG. 22)

(1)Remove trim panel and water shield and connect window switch to wire connector.

(2)Raise glass to 25 mm (1 in.) from full up position. Using suitable tape, secure door glass to upper window frame.

(3)Disconnect battery negative cable.

(4)Remove bolts holding window regulator to inner door panel.

(5)Slide roller from window lift channel. Rotate regulator

to bring lift arm through access hole first.

(6)Remove regulator assembly from door.

POWER WINDOW REGULATOR INSTALLATION

Reverse the preceding operation.

Fig. 22 Front Door Window RegulatorÐPower

FRONT POWER DOOR LOCK ACTUATOR

REMOVAL (FIG. 23)

(1)Remove trim panel, silencer pad, and water shield.

(2)Disconnect link rod from door latch.

(3)Remove bolts holding power door lock actuator to inner door panel and separate actuator from door.

INSTALLATION

Reverse the preceding operation.

Fig. 23 Front Power Door Lock Actuator