Fig. 27 Front Door Striker Guide Socket

REAR SEAT BACK

REMOVAL (FIG. 28)

(1)Remove seat cushion.

(2)Raise sling well behind quarter trim panels to gain access to seat back nuts.

(3)Reach beneath sling well and remove nuts holding seat back to support reinforcement.

(4)Separate seat back from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 28 Rear Seat Attaching Nuts

QUARTER TRIM PANEL

REMOVAL (FIG. 29)

(1) Remove bolts holding front outboard seat belt to floor. Remove cover from belt end.

(2)Remove screws holding quarter trim to inner quarter panel.

(3)Remove push-in fastener holding top of door opening weatherstrip to quarter trim panel.

(4)Remove door opening sill plate as necessary to clear quarter trim.

(5)Remove courtesy lamp and disconnect wire connector.

(6)Separate trim panel from inner quarter panel and disconnect speaker wire.

(7)Remove bolts holding rear outboard seat belt to inner quarter panel.

(8)Push seat belt end through openings in trim panel and remove trim panel from vehicle.

INSTALLATION

Reverse the preceding operation.

Fig. 29 Quarter Trim Panel

DOOR STRIKER GUIDE

REMOVAL (FIG. 30)

(1)Remove quarter trim panel as necessary to gain access to striker guide attachments.

(2)Remove nuts holding striker guide to inner quarter panel.

(3)Separate striker guide from lock pillar.

INSTALLATION

Reverse the preceding operation.

FRONT SEAT BELT RETRACTOR

REMOVAL (FIG. 31)

(1)Remove quarter trim panel as necessary to gain access to seat belt retractor.

(2)Remove bolt holding shoulder harness turning loop to inner quarter panel.

(3)Remove bolt holding seat belt retractor to inner quarter panel.

(4)Separate seat belt from vehicle.