23 - 114 AP/27 CONVERTIBLE

(4)Remove screws holding second roof bow to top cover listing retainer (Fig. 9).

(5)Remove staples holding stay pads to second roof

bow.

(6)Separate second roof bow from top frame.

INSTALLATION

(1)Position second roof bow on convertible top.

(2)Staple stay pads to second roof bow tack strip in same locations as the original assembly.

(3)Install screws to hold top cover listing retainer to second roof bow.

(3)Install screws, washers and spacers to hold roof bow actuating link to pivot link.

(4)Install clevis pins and E-clips to hold second roof bow pivot link to top header.

(5)Verify convertible top operation.

Fig. 8 Second Roof Bow

Fig. 9 Second Roof Bow Retainer

THIRD ROOF BOW

REMOVAL

(1)Disengage top header latches.

(2)Lower convertible top halfway down.

Ä

(3)Remove bolts holding third roof bow to rear roof

rails.

(4)Separate third roof bow from rear roof rails.

(5)Rotate third roof bow to gain access to staples holding stay pads to tack strip.

(6)Remove staples holding stay pads to third roof

bow.

(7)Remove screws holding top cover listing retainer to third roof bow (Fig. 10).

(8)Separate third roof bow from top frame.

INSTALLATION

(1)Position third roof bow on convertible top.

(2)Staple stay pads to third roof bow tack strip in same locations as the original assembly.

(3)Install screws to hold top cover listing retainer to third roof bow.

(3)Install bolts to hold third roof bow rear roof

rails.

(4)Align third roof bow to be centered over the rear roof rails.

(5)Verify convertible top operation.

Fig. 10) Third Roof Bow Retainer

FOURTH ROOF BOW AND SLAT

The fourth roof bow and slat is adjustable to decrease wrinkles in the convertible top cover sail panel and rear window areas.

REMOVAL (FIG. 11)

(1)Lower rear window glass. position glass flat on the bottom of the sling well.

(2)Lower convertible top halfway down.

(3)Remove pivot bolts and bushings holding fourth roof bow slat to rear roof rail (Fig. 12).

(4)Remove tension spring from between rear roof rail and fourth roof bow slat (Fig. 13).

(5)Remove shoulder bolts holding fourth roof bow to slat.

(6)Separate bow from slats (Fig. 12).

(7)Allow roof bow to drop downward.