Добавил:
Sekretar
kiopkiopkiop18@yandex.ru
t.me/Prokururor I Вовсе не секретарь, но почту проверяю
Опубликованный материал нарушает ваши авторские права? Сообщите нам.
Вуз:
Предмет:
Файл:Ординатура / Хирургия / Библиотека им академика М.И. Перельмана / Книга_5925_Библиотеки_им_академика_М_И_Перельмана.pdf
100 3 Comprehensive Insights into UV-VIS Spectrophotometry
It contributes to the UV absorption of compounds possessing nonbonding electron
pairs. Specifically, the excitation of electrons from an unshared pair on an atom to an
antibonding sigma orbital is known as an n → σ * electronic transition. This
transition is typical for saturated molecules like halides, ethers, and alcohols. The
energy required for the n → σ* electronic transition is lower than that of the σ → σ *
transition, resulting in absorption at longer wavelengths wit
typically falling b
etween 150 nm and 250 nm. For example, methyl alcohol exhibits
hin the UV-VIS region,
an n → σ * electronic transition at 183 nm, while trimethylamine displays this
transition at 227 nm. Notably, trimethylamine does not exhibit an n → σ * electronic
transition in aqueous acid because the protonated amine lacks nonbonding electrons.
Furthermore, chloromethane (CH
tronic transitions with λ
max
Cl) and benzene (C6H6) undergo n → σ* elec-
3
of 173 nm and 277 nm, respectively.
3.4.1.4 n → p* Electronic Transition
In this type of transition, an electron from a nonbonding orbital is elevated to a σ*
(sigma star) antibonding orbital. This transition is associated with the absorption of
UV light and is commonly observed in compounds that possess nonbonding electron
pairs capable of interacting with σ* orbitals. Additionally, another type of transition
involves the excitation of unshared pair electrons on heteroatoms to the antibonding
π* (pi star) orbital. In this orbital, nonbonding electrons are held more loosely, which
results in longer wavelengths being required for the transition. This type of transition
is found in compounds containing double bonds that involve heteroatoms with
unshared pairs of electrons, such as C=O, C=S, N=O, and so on. For example,
ketones and aldehydes exhibit two absorption bands: one in the range of
180–200 nm (π → π*) and another at 280 nm (n → π*). The n → π* electronic
transition is relatively weaker due to the nonbonding electrons in the n orbital being
situated perpendicular to the plane of the π bond, reducing the likelihood of electron
transition from the n orbital to the π* orbital.
3.5 Origin of Absorption Spectra
Absorption spectra in UV-VIS spectroscopy originates from the interaction of
molecules with EMR, particularly in the UV and VIS regions. When molecules
are exposed to UV or VIS light, electrons within the molecules can undergo
electronic transitions. These transitions involve the promotion of electrons from
lower energy levels (ground state) to higher energy levels (excited state). The
absorption of photon s of specific energy corresponds to the energy gap between
ese
th
electronic levels, leading to a reduction in the intensit y of the transmitted light.
The resulting pattern of absorption as a function of wavelength or frequency creates
the absorption spectrum, which serves as a unique fingerprint for each compound
and provides valuable information about the electronic structure of the molecules.
3.5 Origin of Absorption Spectra 101
3.5.1 Electrons Present in Molecules
Molecules can contain various types of electrons, including:
• Valence electrons: These are involved in chemical bonding, forming σ and π
bonds in covalent compounds.
• Nonbonding electrons (lone pairs): These are electrons not involved in bonding
and often found
on electronegative
atoms.
• π electrons: Involved in the formation of π bonds in double and triple bonds, such
as in alkenes and alkynes.
• σ electrons: Involved in the formation of σ bonds, often associated with single
bonds.
• n electrons: Nonbonding electrons that can interact with π* or σ * antibonding
orbitals.
3.5.2 Rules for Interpretation of Absorption Spectra
Interpreting absorption spectra involves recognizing key features:
• Beer–Lambert law: The absorbance (A) of a sample is directly proportional to the
concentration (C) of the analyte, the path length (l ) of the cuvette, and the molar
absorptivity (ε), as described by: A = ε· C. l
Deviations from this law can occur at high concentrations due to molecular
interactions.
• Chromophores and Auxochromes
– Chromophores are parts of the molecule responsible for absorbing ligh
UV or visible
region, typically involving π-electrons or nonbonding electrons.
t in the
– Auxochromes are functional groups that, when attached to chromophores, alter
wavelength
the
and intensity of absorption, typically shifting the absorbance
toward longer wavelengths (bathochromic shift).
• Types of electronic transitions: In UV-VIS spectroscopy, various electronic
transitions occur, such as:
– π → π*: Common in unsaturated organic compounds (e.g., alkenes,
aromatics).
– n → π*: Involves nonbonding electrons (e.g., carbonyl compounds).
– n → σ* and σ → σ*: Less common in the UV-VIS region but may occur in
compounds with saturated bonds.
• Bathochr omic shift (red shift): This shift to a longer wavelength (lower energy)
occurs due to factors such as:
– Conjugation in the molecule.
– Presence of electron-d
onating auxochromes (e.g., -OH, -NH
).
2
102 3 Comprehensive Insights into UV-VIS Spectrophotometry
– Solvent effects (polar solvents can stabilize excited states more than ground
states).
• Hypsochromic shift (blue shift): A shift to a shorter wavelength (higher energy)
occurs due to:
– Loss of conjugation or interaction of the chromophore with electron-
withdr
awing groups.
– Change
in solvent polarity, reducing stabilization of the excited state.
• Hyperchromic and hypochromic effects
– Hyperchromic effect: An increase in absorbance intensity (ε) due to structural
modifications or
– Hypo
chromic effect: A decrease in absorbance intensity due to factors like
solvent effects.
solvent changes or introduction of substituents.
• Solvent effe cts: The polarity of the solvent can significantly influence the absorp-
tion spectra:
– Polar solvents tend to stabilize excited states more than ground states, leading
to bathochromic shifts.
– Nonpolar solvents can lead to hypsochromic shifts due to less stabilization of
the excited state.
• Substitu ent effects: Electron-donating groups (EDGs) shift absorption maxima to
longer wavelengths and increase absorbance, while electron-withdrawing groups
(EWGs) typically result in shorter wavelengths and decreased intensity.
• Woodward – Fieser rules: These rules help predict the absorption maxi
ma (λ
max
of conjugated systems like dienes and enones by considering:
– Base values for chromophores
– Incremental changes due to substituents (e.g., alkyl groups, double bonds)
• Influence of conjugation: Extended conjugation in molecules lowers the energy
gap between the highest occupied molecular orbital (HOMO) and the lowest
unoccupied molecular orbital (LUMO), resulting in absorption at longer
wavelengths.
• pH effects: pH changes can alter the protonation state of functional groups,
leading to shifts in the absorption maxima. For example, phenols and amines
exhibit different absorption characteristics under acidic or basic conditions.
• Instrument cali
bration: Reg
ular calibration of the UV-VIS spectrophotometer is
crucial for obtaining accurate and reproducible spectra. Calibr ation involves
comparing the instrument’s readings with known standards.
)
3.5.3 Factors Affecting Absorption Spectra
The shape and position of absorption bands in spectra in UV -VIS spectroscopy can
be significantly influenced by several factors:
3.5 Origin of Absorption Spectra 103
3.5.3.1 Nature of the Molecule
The types of bonds, functional groups, and the presence of heteroatoms in a
molecule affect its absorption spectrum. Molecules with extended π-systems or
conjugated double bonds exhibit distinctive absorption patterns.
3.5.3.2 Temperature
Temperature can have a notable impact on the absorption spectra of compounds,
particularly in UV-VIS spectroscopy. The effects include changes in the position,
intensity, and shape of absorption bands, which are crucial for accurate interpretation
of spectral data.
1. Molecular motion and electronic transitions
• Increased molecular motion: At higher temperatures, molecules exhibit more
kinetic energy, which can lead to broadening of absorption bands. This is
because increased molecular motion causes slight variations in the energy
levels of the molecules, resulting in less sharp absorption peaks.
• Shift in λ
λ
max
: In some cases, higher temperatures can induce small shifts in the
max
. This occurs because temperature affects the ground and excited state
energies differently. Typically, a slight hypsochromic shift (blue shift) or
bathochromic shift (red shift) can be observed, depending on the molecular
environment and interactions.
2. Vibrational and rotational energy levels: As temperature increases, vibrational
and rotational energy levels of molecules are populated more, which can result
in broadening of absorption bands. This broadening is more pronounced in
solvents with high viscosity and in highly conjugated systems.
3. Solvent effects: Temperature affects solvent properties like viscosity and polarity. These changes can influence solvent-solute interactions, which can, in turn,
affect the absorption spectra. For example, polar solvents may stabilize or
destabilize the excited states at different temperatures, resulting in small spectral
shifts.
4. Conformational changes: Some compounds may undergo conformational
changes at higher temperatures. For example, proteins or other complex organic
molecules can partially unfold, altering their chromophores’ environment and
thereby affecting the absorption spectra. This is often seen as changes in the
absorbance intensity and shifts in λ
max
.
5. Dissociation and aggregation
• Dissociation: At elevat
peratures, some compounds may dissociate into
ed tem
ions or smaller components, altering the electronic environment of the
chromophores. This leads to a change in absorption characteristics.
• Aggregation:
On the
contrary, at lower temperatures, molecules may aggregate, which can lead to changes in the absorption spectra due to new
intermolecular interactions.
6. Photochemical
reactions: High temperatures can also enhance the rate of pho-
tochemical reactions in certain compounds, leading to decomposition or
104 3 Comprehensive Insights into UV-VIS Spectrophotometry
chemical changes in the analyte during measurement. This may lead to altered
absorption profiles or even new peaks in the spectra.
7. Band broadening: Higher temperatures cause band broadening due to increased
molecular motion.
8. Wavelength shifts: Slight red or blue shifts in λ
may occur depending on the
max
molecular and solvent environment.
9. Changes in absorbance: The intensity of absorption may either increase or
decrease based on temperature-induced changes in molecular structure or solvent properties.
10. Conformational changes: Temperature can lead to conformational changes in
large molecules like proteins, affecting their spectra.
11. Photodegradation: Care must be taken as higher temperatures can promote
unwanted photochemical reactions.
3.5.3.3 Concentration
The concentration of an analyte significantly influences its absorption spectra in
UV-VIS spectroscopy. Understanding these effects is crucial for accurate quantitative and qualitat ive analysis.
1. Beer–Lambert law: The Beer–Lambert law states that absorbance (A) is directly
proportional to the concentration ( C) of the analyte, the path length (l) of the
sample cell, and the molar absorptivity (ε) of the substance: A = ε × C × l. Within
a certain range, as concentration increases, the absorbance also increases linearly,
allowing for accurate quantification of the analyte.
2. Linear absorbance: At low concentrations, absorbance increases proportionally
with concentration, producing a straight line when plotting absorbance versus
concentration. This linear relationship holds true when the sample solution is
dilute enough for individual particles to absorb light independently without
interaction with one another.
3. Deviation from linearity at high concentrations: At higher concentrations, the
Beer–Lambert law often deviates from linearity due to several factors:
• Molecular interactions: As the concentration increases, molecules are closer
together, leading to interactions such as aggregation, dipole–dipole
interactions, or solute–solvent interactions, which can affect the energy levels
of the molecules and, consequently, their absorption characteristics.
• Refractive index changes: Higher concentrations can alter the refractive index
of the solution, which affects the path of light and the absorbance measured.
• Inner filter effect: In highly concent rated solutions, a significant portion of the
light is absorbed in the front layers of the solution, reducing the amount of
light that reaches the back layers. This leads to an apparent decrease in
absorbance and distortion of the spectra.
4. Shifts in absorption bands
• Hypsochromic shift (blue shift): At high concentrations, the chromophores
may interact more strongly, leading to a hypsochromic shift, where the λ
max
shifts to shorter wavelengths.
3.5 Origin of Absorption Spectra 105
• Bathochr omic shift (red shift): Conversely, interactions like aggregation may
lead to a bathochromic shift, where λ
shifts to longer wavelengths due to
max
extended conjugation or altered molecular environments.
5. Changes in peak intensity
• Hyperchromic effect: At moderate concentrations, the absorbance or intensity
of
the absorp
tion peak increases proportionally with concentration.
• Hypochromic effect: At very high concentrations, the absorbance peak inten-
sity may decrease due to molecular interactions, reducing the ability of the
chromophores to absorb light efficiently.
6. Aggregation and precipitation: At high concentrations, especially in complex
organic molecules or polymers, molecular aggregation can occur. This aggregation alters the electronic structure and leads to significant changes in the absorption spectrum, including reduced peak intensity and shifts in the absorption
wavelength. In extreme cases, the solubility limit may be reached, causing
precipitation, which affects light transmission and absorbance measurements.
7. Dilution effects: Dilution of the solution often restores the linear relationship
between concentration and absorbance, especially when the inner filter effect or
molecular interactions cause deviations. Dilution reduces the likelihood of chromophore interactions, allowing accurate measurements in accordance with the
Beer–Lambert law.
8. Practical implications: Accurate UV-VIS spectroscopy measurements require the
concentration of the analyte to be within a range where Beer–Lambert law holds.
For accurate quantification, solution s may need to be diluted to avoid nonlinear
absorbance or deviations caused by high concentrations. Monitoring the absorbance values is critical—values between 0.1 and 1.0 are generally considered
reliable for UV-VIS spectroscopy, as they minimize error due to light scattering
or detector limitations. Careful calibration and concentration control are necessary to ensure that measured absorbance corresponds to the actual concentration
of the analyte.
3.5.3.4 pH
The pH of a solution can have a significant impact on the absorption spectra of
compounds analyzed through UV-VIS spectroscopy. This effect is particularly
important for molecules that contain functional groups sensitive to changes in
protonation states, such as acids, bases, or compounds with ionizable groups (e.g.,
amines, carboxyls, and phenols).
1. pH and protonation/deprotonation of functional groups
• Many compounds,
especially those containing acidic or basic groups, can
undergo protonation or deprotonation depending on the pH of the medium.
This alteration in protonation state affects the electronic structure of the
molecule and its ability to absorb light in the UV-VIS region.
106 3 Comprehensive Insights into UV-VIS Spectrophotometry
• Protonation tends to add protons (H+ ions) to the molecule, which may change
the extent of conjugation or modify electron distribution.
• Deprotonation removes protons, which can increase the number of lone pairs
or change the electronic environment, shifting the
– Example: In acidic conditions, aniline (C₆H₅NH₂) undergoes protonation to
form anilinium ion (C₆H₅NH₃
+
), which reduces conjugation and causes a
absorption
characteristics.
hypsochromic shift (blue shift) in the absorption spectrum as it absorbs at a
shorter wavelength. Conversely, p-nitrophenol in basic conditions becomes
deprotonated (p-nitrophenoxide), increasing the electron density and causing a bathochromic shift (red shift) due to increased conjugation.
2. Shifts in absorption bands
• Bathochr omic shift (red shift): When deprotonation increases the conjugation
or enhances electron delocalization, the λ
shifts to longer wavelengths. This
max
is typically seen when acidic groups (e.g., –OH, –COOH) are deprotonated, as
the resulting species have altered electronic structures that absorb at longer
wavelengths.
– Example: Phenol exhibits a bathochromic shift when it is deprotonated to
phenoxide ion at higher pH.
• Hypsochromic shift (blue shift): Protonation can reduce conjugation or elec-
tron delocalization, causing
a shif
t of λ
to shorter wavelengths. This shift is
max
often observed in basic molecules that lose electron density when protonated
in acidic media.
– Example: Aniline shows a hypsochromic shift upon protonation in acidic
medium.
3. Changes in peak intensity
• Changes in the pH of a solution not only affect the λ
but also the intensity of
max
the absorption peak.
– Hyperchromic effect: In some cases, protonation
or deprot
onation enhances
the intensity of the absorption, leading to a higher absorbance peak.
– Hypochromic effect: In other cases, it may decrease the absorption intensity
due to reduced electron delocalization or the loss of chrom ophoric
behavior.
4. pH and chromophores: Auxochromes (functional groups like –OH, –NH₂) are
highly sensitive to pH changes. While auxochromes do not absorb UV light on
their own, their attachment to chromophores affects absorption. A change in pH
can modify the ability of these auxochromes to influence chromophores, altering
the spectrum in terms of both wavelength and intensity.
5. pH and tautomerism: Some compounds exist in tautomeric forms that are
pH-dependent, such as keto-enol tautomers. The balance between these forms
shifts with pH, and since the tautomers have different absorption spectra, the
overall spectrum changes as pH alters the tautomer ratio.
• Example: In the
case of nitrophenols, the keto form absorbs at a shorter
wavelength, whereas the enol form absorbs at a longer wavelength. A change
in pH can shift the equil ibrium between these two forms, resulting in a
different absorption spectrum.
3.5 Origin of Absorption Spectra 107
6. pH and solubility: Some compounds are more soluble at certain pH levels, which
affects the ability of the spectrophotometer to measure absorbance accurately. At
extreme pH levels, insolubility may occur, leading to precipitation and a decrease
in absorbance.
7. Applications in pH-dependent analysis
• Buffer systems: In biological and chemical systems, the use of buffers ensures
that the pH remains constant, allowing for more reliable measurements of
analytes that are pH-sensitive.
• pH titrations: UV-VIS spectroscopy can be used to monitor changes in
absorbance as a function of pH, enabling
the deter
mination of pKa values
for compounds.
– Example: The pKa of a phen olic compound can be determined by observ-
ing the shift in its UV-VIS spectrum as the pH of the solution changes.
8. Practical considerations
• Calibration: It is important to calibrate the spectrophotometer using solutions
with known
• Buffering agents: Use of buffering agents can help maintain a constant
during the
pH v
alues to ensure accurate measurements.
pH
analysis, preventing unexpected shifts in the absorption spectra due
to changes in protonation or deprotonation states.
• Control of pH: Ensure the pH of the solution is consistent throughout the
analysis to avoid erroneous results caused by pH-induced changes in the
absorption spectrum.
3.5.3.5 Solvent Polarity
Polarity refers to the distribution of electrical charge around atoms, chemical groups,
or molecules. A polar solvent has a significant difference in electronegativity
between its atoms, leading to an uneven distribution of electron density. This creates
a dipole moment, where one end of the molecule has a partial negative charge (δ
and the other end has a partial positive charge (δ
+
). Solvent polarity is a critical
-
concept in chemistry that influences various chemical properties and reactions. It
primarily affects solubility, reaction rates, and the behavior of molecules in solution.
The polarity of a solvent is determined by its molecular structure, particularly the
distribution of electrical charge across the molecule, which arises from differences in
electronegativity between atoms and the molecular geometry.
1. Types of solvents
• Polar solvents: These solvents have
high diele
ctric constants and significant
dipole moments. They can solvate ionic and polar compounds effectively
3.1). Examples include:
(Table
A polar
with a
strong hydrogen bonding capability
solvent due to the hydroxyl (-OH) group
– Water (H₂O): Highly polar
– Ethanol (C₂H₅OH):
– Acetone (C₃H₆O): Polar aprotic solvent with a carbonyl group
)
108 3 Comprehensive Insights into UV-VIS Spectrophotometry
Table 3.1 Common solvents and their polarity
Sr. # Solvent Polarity Dielectric constant (ε) Polarity index (P)
1. Water High 78.5 9.2
2. Ethanol Moderate 24.3 5.1
3. Acetone Moderate 20.7 5.0
4. Methanol High 32.7 6.6
5. Dimethyl sulfoxide High 47.2 7.2
6. Toluene Low 2.4 2.4
7. Hexane Very low 1.9 0.1
8. Chloroform Moderate 4.8 4.1
• Nonpolar solvents: These solvents have low dielectric constants and do not
have significant dipole moments. They are effective for dissolving nonpolar
compounds. Examples include (Table
3.1):
– Hexane (C₆H₁₄): A nonpolar hydrocarbon solvent
– Benzene (C₆H₆): A nonpolar aromatic solvent
• Apolar solvents: These are solvents with low polarity and little to no dipole
moment.
– Toluene (C₇H₈): A
Examples
include:
nonpolar
solvent that
can solvate
certain nonpolar
molecules.
2. Measuring solvent polarity
Polarity can be quantitatively measured using various scales, with the most
common being (Table
3.1):
• Dielectric constant (ε): A measure of a solvent’s ability to reduce the electro-
static forces between charged particles.
Higher values
indicate higher polarity.
For example:
– Water (ε ≈ 78.5)
– Ethanol (ε ≈ 24.3)
– Hexane (ε ≈ 1.9)
• Polarity index (P): A relative measure of polarity that takes into account
dielectric
constant and solve
nt–solute interactions. For example:
– Water (P = 9.2)
– Acetone (P = 5.1)
– Hexane (P = 0.1)
3. Influence of solvent polar
• Solubility:
Polar solve
chemical
ity on
nts are more effective at dissolving ionic and polar
properties
compounds, while nonpolar solvents dissolve nonpolar compo unds. The
“like dissolves like” principle indicates that polar solutes dissolve in polar
solvents, and nonpolar solutes dissolve in nonpolar solvents.
• Reactio n mech
anisms: The polarity of a solvent can influence the rate and
mechanism of chemical reactions. Polar solvents often stabilize ionic
intermediates, while nonpolar solvents may favor reactions involving radical
intermediates.
3.5 Origin of Absorption Spectra 109
• Spectroscopic properties: The polarity of a solvent can affect the absorbance
and emission spectra of solutes. For example, polar solvents can lead to shifts
in the absorption maxima of chromophores due to solvation effects,
influencing the Beer – Lambert law.
4. Applications of solvent polarity in UV-VIS spectroscopy
• Choosing solvents for spectroscopic measurements: The solvent should be
selected
based on its ability to dissolve the analyte without interfering with the
absorption characteristics. Polar solvents may enhance the absorption of polar
analytes.
• Solvent effects on electronic transitions: The interaction between solvent
molecules
and solute can affect the energy levels of the HOMO and LUMO,
altering the wavelengths at which absorption occurs. This phenomenon can
result in hypsochromic (blue shift) or bathochromic (red shift) shifts in the
UV-VIS spectrum.
3.5.3.6 Solvent Interactions
Solvent interactions play a crucial role in influencing the absorption spectra of
compounds in UV-VIS spectroscopy. The solvent can affect both the position
(wavelength) and intensity of the λ
by interacting with the solute molecules in
max
various ways. These interactions are prim arily due to differences in solvent polarity,
hydrogen bonding ability, and dielectric constant, which influence the electronic
transitions of molecules.
1. Solvent polarity and absorption shifts
The polarity of the solvent has a significant effect on the absorption spectrum of
solute, particularly when the solute undergoes electronic transitions such as
the
n → π or π → π . The effect can lead to shifts in λ
, either toward longer or
max
shorter wavelengths, known as bathochromic (red shift) or hypsochromic (blue
shift), respectively.
• Polar solvents: In
polar solvents, there is strong interaction between the
solvent molecules and the excited-state dipoles of the solute. Polar solvents
stabilize the excited state more than the ground state for many molecules.
n → π transitions are particularly sensitive to solvent polarity because the
excited state is more polar than the ground state. Hence, polar solvents cause a
bathochromic shift for n → π transitions. π → π transitions are also
influenced by solvent polarity, but the shifts are typically smaller compared
to n → π transitions. The excited states are usually slightly more stabilized
than the ground states, leading to a slight bathochromic shift.
• Nonpolar solvents:
In nonpolar solvents, interactions between the solvent and
solute are weaker. The ground state and excited state are less stabilized
compared to polar solvents, often resulting in hypsochromic shifts (blue shifts)
for certain transitions, especially n → π .