2.5 Initial setup of the access points di-524

1 Plug the adapter into the USB port on your computer.

2 Plug the router into an electrical network.

3 Button RESET return the router to factory settings (name

username: admin, password: ( obvious gap keys , default network name ,gateway 192.168.0.1,protection: disabled, DHCP enabled, network type: mixed (b/g),

bitrate: auto).

4 Check the default wireless network and connect to it.

5 If the network is unavailable or unable to connect, check:

a)whether the adapter is enabled;

b) wheather access point is enabled in the network;

c) check TCP/IP settings (auto receiving of Protocol settings).

6 Run any browser and then in the address bar type http://192.168.0.1 and

press Enter. As a result you will receive the router invitation. If it does not appear then check out all listed above items.

7 Press in the opened window the Run Wizard button to view the settings. Run

Wizard-> > Next – change password (do not change it) – > > Next – select time

area (select appropriate) – Next > >--Get a dynamic IP address

Next – > MAC address (not changing) – > Installing wireless connections (network name ,channel number,protection algorithm,key-not changing) – Next-> > Exit

2.6. Base setting of di-524

1 Browser -http://192.168.0.1 – user name (admin): password (skip if the factory settings are working or input for example ‘space’ by “space” button and then OK) come into main menu window ,default bookmark Home.

2 Wireless-Network ID (SSID): CC-WiFi-Channel: 6 ( do not change ) – Security: none- - button Apply.

3 Button WAN. Select Dynamic IP Address.

4 Button LAN. IP address DI-524: 192.168.0.1. Network mask: 255.255.255.0.

5 Bookmark Tools--Admin button. Old password: old password (if there is no password then leave it empty), the New password: new password: repeat Reconfirm password :new password--Apply.

6 Tab Advenced, select the Performance button. Has to be in values Wireless Mode: mixed mode, TX Rates: Auto

7 Button DHCP. DHCP server: Enabled.

8 Open the wireless network connection (click on the icon in the left-bottom

corner of the screen). Click Refresh network list and join the CC-WiFi.

2.7. Configurationof browsers for Internet access

Internet Explorer:

-Select the menu item "Tools", then "Internet Options".

-In the window select the tab "connections". In this window click "LAN settings" button.

-Tick the "use proxy server for LAN connection "and" do not use proxy server for local addresses”.

-Immediately register address: proxy.config onat .edu, port: 3128.

Configuring the Mozila Firefox

-Open the menu "Tools", then "settings".

-Select the “Advanced” tab. In this window, click the

"Configure".

-Mark with a point "configure proxy connection manually. HTTP proxy: proxy. onat .edu. ua, port: 3108. In the line " do not use proxy for”: 127.0.0.1,192.168.0.1.

Configuring network access via laptop

1 At the entering a zone of Wi-Fi system instantly generates

message "wireless network is connected now”.

2 Double click on the wireless network icon (bottom right corner of the screen-

Select network CC-WiFi-- button "Connect" .

3 Start-settings-Network connection-wireless connection network-connection

Internet Protocol (TCP/IP) -properties—auto receiving of protocol parameters.