Phedotikov / 1 / FreeEnergy_27.01.08 / Схемотехнические / Генератор Floud sweet VTA / Floyd Sweets VTA Replication Project

Floyd Sweets VTA Replication Project .g { MARGIN-TOP: 1em; MARGIN-BOTTOM: 1em }    

Floyd Sweet's VTA or SQM "The Space Quantum Modulator".

Later named to the VTA "Vacuum Triode Amplifier" by Tom Bearden.

        VTA Replication Experiments.

Theory of operation.

Everybody knows something about magnets. They have a pole, one north pole and one south. Some magnets can have many poles, they are called multi pole magnets. Many metals are attracted to magnets, magnets attract and repel each other. In physics class our science teachers teach us that a force can be transformed into another force and that energy is a product of force. Mr Floyd Sweet found that setup in a certain way that the force of a magnet could be used to create electricity. Floyd's device was named the "Space Quantum Modulator" SQM. Tom Bearden later renamed the SQM to the "Vacuum Triode Amplifier" or VTA. The SQM was constructed from two flat rectangular magnets spaced approximately 50 mm apart. There were two to four bifilar coils between the magnets and (the driver or tickler coil / coils) were at right angles to the collector coil.

In this Article we will refer to Floyds invention as the SQM. Floyd Sweets SQM produced an abundance of negative energy, some times referred to as cold energy. Reports of cold energy devices are not common but inventors like Edwin Gray, T H Moray, and the most famous of all Nikola Tesla have all made reports of cold energy. Negative energy has been reported as having opposite characteristics compared to the characteristics we know as positive energy. Negative energy has been reported to pass through human tissue with just the feeling of a chill while still being able to power the everyday items we need power for. Light Bulbs, Toasters, fridges, even computers are all supposed to work just fine from this type of electrical energy.  The field of negative energy or free electricity is a subject that is commonly brushed off by the leading scientific institutions and government funded research centers. The reason is very clear, Oil. Oil is the Economy's back bone at the moment and sooner or later it MUST change. We are running out, and polluting our planet. Magnets are a solid state object. Scientifically not a lot of information is known about magnets but the Information that is known after years of research suggest that magnets are made up of small areas called domains. These domains are made up of smaller objects called atoms which everyone knows about. Atoms are reported to have their own magnetic field and they spin on that field. A new field of scientific research is now producing some amazing discoveries, it is called Spintronics. This field is making some big leaps in the computer industry and will most likely result in the first Quantum computers. When Magnets are magnetized they are saturated in a magnetic field around or above 10 KOe, then in many cases they are demagnetized a small amount to make the magnets stable. After the magnetizing process the magnets have their domains aligned (which is represented by the above arrows).

The video footage of Floyd Sweets SQM below was taken from a site no longer running, "http://colossus2.cvl.bcm.tmc.edu/~wje/free_energy/sweet_vta/" (Dead Link).

The Video of the construction and the demonstration of the working SQM unit is available from Tom Bearden's Web Site, Floyd Sweet Secrets with complete unedited contemporaneous commentary by Tom Bearden. 47 minutes. Please Support Tom Bearden, and the production of the MEG, by purchasing this video. Click Here.

Floyd Sweet wrote a paper which we will reference in this Article called "Nothing is Something". This is a must read paper, Click Here.

Reading Floyd Sweets "Nothing is Something", Floyd mentions a signal traveling between two points, A and B. Also mentioned is ``time varying flux modulation'' and Flux fields that break off from randomness.

    It is said that the conditioning of the magnets induces an oscillating magnetic field in the magnet. Floyd Sweet quotes in his paper "The source of energy is unlimited, the virtual vacuum of space itself structured by a motional electromagnetic field is the powerhouse".

The quote, “The fundamental magnets have been broken free of their binding forces which constrained them to be steady state single pole uniform magnetic flux devices.” I believe this quote gives some important insight to the actions of the magnets. Broken free of their Steady State can only mean the atoms them selves must be in an active state when the excitation coil is activated with a sine wave magnetic field generated at 10V @ 1 mA (10 mW) of excitation at 60 Hz as in the illustration above. As previously mentioned Spintronics funnily enough has a very similar flipping of the atom. If we think about the actual construction of the SQM we see the excitation coil is at right angles to the magnets, the collection coil is at zero degrees from the magnets, this gives us two angles of magnetic flux to look at. This brings us to another quote,” However, under the influence of a generated Motional Electromagnetic field parts of the normally chaotic virtual field break off from randomness and form a more coherent region.” Floyd in the video, makes a special mention about the resonance of the magnets and that the 60 Hz is put in to the magnets while they are in their resonant state. Given this information Conclusions can be drawn, The atoms in the magnets them selves are being manipulated at or above ninety degrees, possibly as far as 180 degrees.

The motion of the atoms are driven by the excitation coil with a sine wave magnetic field generated at 10V @ 1 mA (10 mW) of excitation at 60 Hz. This in turn is flipping the atom creating an oscillating magnetic field at close to the original magnetic field strength. Once one atom goes it would in turn flip the other atoms with it. The trick would have been to make sure the collection coil is not generating magnetic fields that would interfere with the atom flipping and the only way to do this is to collect the magnetic field when is is collapsing in on itself. This conclusion is drawn from the Supernova. The star explodes and then collapses in on itself, thus creating a black hole. We are tapping into the negative potential that the collapsing field is giving us and In turn this energy is called negative energy. With the Bifilar coils on the collector coil it would be possible to collect an ever collapsing field at varying strengths thus creating a sine wave output at 60 Hz. This can be concluded by the quote, "Consider for a moment the construction of the triode which includes the bifilar coils located within the fields of the two conditioned magnets. When the current in one half of the conductors in the coils (i.e., one of the bifilar elements in each coil) of the device is moving up, both the current and the magnetic field follow the right-hand rule. The resultant motional E-field would be vertical to both and inwardly directed. At the same time the current in the other half of the conductors in the coils is moving down and both the current and magnetic field follow the right- hand rule. The resulting motion E-field is again vertical to both and inwardly directed. Thus, the resultant field intensity is double the intensity attributable to either one of the set of coil conductors taken singularly". I believe this quote to be the most important in the understanding of the collection of the field in the coils. The conditioning of the magnets is quite obviously a difficult process to get right or we would have SQM's powering our cars and houses. Lets hope we can soon get the conditioning process right. Our governments are not going to run lengthy research programs to release information like the SQM to us so we have to do it ourselves.

Floyd Sweets SQM Replication Project.

hyiq.org has now started an on going project, dedicated to the replication of Floyd Sweets SQM.

Starts 19-02-05 .

Check out our Forum.

Experiment #No1

Update 19-02-05. This experiment is an attempt to replicate the conditioning process in the Tom Bearden Video. This is to verify the validity of the explanations of the conditioning procedure from the information contained in the video.  The Bearden/Sweet video consisted of: Two coils, One large conditioning coil seen in the picture on the right,  and one smaller coil that is inside the larger coil that sits at the bottom (no# 15 gauge 4 Ohms). The smaller coil that sits at the bottom of the larger coil is powered by a wave tech oscillator  through a 100 watt audio amplifier. An SCR that is triggered by a Variac that powers the Larger conditioning coil with a 1600uf DC Capacitor (RC Time constant is triggering the capacitor with the variac. (T = R x C)( T= 60 Hz). There is a rectifier that seems to be used to change from AC current to DC current. There does not seem to be any current smoothing circuitry. T = R x C 1/60 of a second = 16.6666667 milliseconds (60 Hz) Capacitance = 1600 uf Resistance = 10.4166  Ohms   General conditioning procedure in the video: The procedure is as follows. The magnet is placed on top of the conditioning coil and bought into resonance by the small coil at the bottom of the large coil. This is done by tuning the Wave Tech oscillator down to between 8 Hz and 13 Hz. Then the 60 Hz is bought up to full power to the Conditioning coil. The same is done with the second magnet. The ends are marked and kept in line with the earths magnetic field. The magnets are then placed together on the holder (Aluminum rectangular tube with two inches gap to keep the magnets apart ) in attraction mode with the ends in the same direction when they were marked. The magnets are then placed in side the large conditioning coil at right angles to the magnetic field and again in line with the earths magnetic field. The small resonant coil is still at the approximate 13Hz resonance and again the conditioning coil is bought up to full power at 60 Hz. In a nut shell that's it.  

Click the pictures for more information.                  

Update 19-02-05. Experiments have started.

The smaller coil on the inside of the big coil is not giving off enough Magnetic field to get the magnet on top of the large coil in resonance. My magnets are slightly thicker and the Magnets field strength is too strong to let the resonant coil have an effect. The current size of the wire is 1.5 mm and it might be to big for the Amplifier to give it the correct wave form efficiently. A new roll of no# 15 gauge wire will be purchased this week and wound on to the spool. The Impendence is a bit low also. 3.2 Ohms and Floyd mentions in the video that it is supposed to be 4 Ohms. The large coil is pulsing nicely. I currently have a step down transformer with an output at 120 Volts 60 Hz  pulsing into the Large coil. The wave form is not yet what I am wanting to achieve. My basic circuit needs some improvements. The size of the wire on the large coil is currently 1.5mm and measures 1 Ohm. I am currently thinking this coil might need to be Bifilar instead of just the single filer coil I currently have. I am currently testing field strength versus wire size and impedance.

More work will be done tomorrow and Pictures will be posted.  

Click the pictures for more information.

Update 20-02-05. Today I built several capacitor banks and tested further the coil discharge with the (R x C = T) RC Time constant. I am having problems getting the waveform correct to the large conditioning coil. I will have to sort further help with the circuit. It may be the capacitors or even the SCR not switching properly. More testing to come on this small problem soon. I will be getting a variac this week also to regulate voltage better to the input.

Click the pictures for more information.

Update 26-02-05. This morning I spoke to Mr Walt Rosenthal. Mr Rosenthal helped Floyd with the SQM by building circuits and helping out when Floyd needed it. I asked a few questions about the SQM and the conditioning of the magnets. Mr Rosenthal will, from time to time, check in on the project and will offer advice about the progress and offer insight to the project. The below is the email that Mr Rosenthal and I exchanged.

Dear Chris:

The pulse to the conditioning coil was the single discharge of a capacitor affected by using a large SCR that was triggered at the zero crossing of the sine wave being supplied to the output coils placed between the magnets.

The output coils were bifilar wound.

Walt

I finished the winding of the resonant coil today also. The weight of the resonant coil is 5.4 Kg it is 1.4 gauge enameled wire with a resistance of 4.1 ohms. Winding this sized wire by hand and when it is this sort of weight was under estimated in time and blisters on my hands.

Click the pictures for more information.

Update 27-02-05. Today I attempted to get resonance in the magnets at the top of the Conditioning coil. Resonance can easily be achieved on top of the resonant coil but the magnetic field strength of the resonant coil is not strong enough to bring the magnet into resonance at the top of the conditioning coil. More power will be needed to get resonance.

We have our first video update today also. Now experiments are starting to get further into the swing more information will be provided in Video update format.

Video Update Low Res. 1.6mb Video Update High Res. 7.9mb

Recommend to use Windows Media Player 10.  

Update 01-03-05. Today I purchased a new Audio generator after suspecting a frequency range limitation with the Troneer Audio generator. The Troneer Oscillator starts at 10 Hz. The new Instek Oscillator starts at 0.3 Hz. I have got the same resonant frequency range as Mr Floyd "Sparky" Sweet. At roughly 8.5 Hz the magnet goes into resonance. This is fantastic news and is a wake call to myself that nothing is written in stone. I will post a new video update this weekend. Tomorrow at lunch time I will go down to get an Iron core turned up for the centre of the resonant coil. We are slowly getting the same setup as Floyd had in the video. I see a lot of hard work ahead and a time consuming set of procedures that need to be checked and double checked to get this experiment right.  Communications with Mr Walt Rosenthal are giving more of an idea on Floyds thoughts when he was where we are now. Try and Try again until it works.

  Update 03-03-05.

I sent an email to Mr John Bedini this week after reading this text from a forum:

I worked with Floyd Sweet in the early days before Bearden and Walt R came along, I gave him old TV sets to watch the cycloids on for his first machine. I know what I have seen because I wound the coils for his box. Kron sent Sweet to get a masters in mathematics at GE. Sweet was a real electro magnetic engineer, by the book he knew Kron's math backwards and forwards. He threw the book at me a few times. Bearden presented him with the Vacuum Triode analogy and the math for it. I also knew the process of his box, there were no magnetic bubbles, no magic magnets, and no special conditioners that will make the box work, but there was a special process of which Sweet's own son did not know, he was an EE and could not understand how it worked. I know because I was there helping him at night. My old boss gave him the test equipment to use. Walt R built the circuits for Sweet but I don't think Floyd Sweet told him the process. That's why I put the negative resistance papers here. The only problem is the box was unstable under certain conditions, shock, shorts, and other things. He kicked me out when I showed him the monopole and the G- Field charging batteries with no real current. I was to close to making it work every time. I was told later he thought I was going to build his box. I kept that secret and studied negative effects in semiconductor lattice with inductive loads instead only because I was trained in semiconductors at TRW right out of school. I found what I was looking for, and I hope you do too.

John sent me back a reply that blew me away, John took some photos of one of Floyds original boxes before the Alloy box models that he has kept from the early days. This is the contents of the mail he sent me also. John Bedini is one of my hero's and always will be. The Pics are on the right.

Chris,

 Here is two pictures of Floyd Sweets original box as you can see the tickler coil is vertical and the power coil is horizontal. The tickler coil is number 26 wire 250 turns the power coil is number 19 wire for 14 turns. In the later box the coils were bi-filer power coils. Sweet gave everybody the same information on conditioning, to keep the secret of what he was really doing.

 Many times he would give out false information on the conditioning process, he would keep changing it. Here are the only tools Sweet had.

 Small oven, old TV set, Amplifier, the rest Walt R built. I have the original circuit somewhere. I will take a picture of it Chris.

 I have watched everybody try to rebuild this device, they are way off track in the conditioning. As I have pointed out to you everybody has failed at this, no box works out there. People change things, it Will not work if you do that, and the information is incomplete. Tom Bearden made a box with Sweet and got it to work in front of him, after that Tom was given less information and told stories all the time, I was kicked out by then. Sweet would lie to anybody. He took my old boss for thousands of dollars.

 John

Click the pictures for more information.

Update 05-03-05. Today I received a fantastic email from Mr Tom Bearden:

Chris,

I’ll have to bow out because in my present very limited physical condition and that of my wife after her stroke, I just don’t have any time anymore.

You will get some good info from Bedini and from Walt. They were there, and they are both very good people.

Sweet did change his original VTA midstream, particularly when he did get the self-resonance trapped in his barium ferrite magnets. He also scanned the surface for the H-field strength variations of the magnetic field, which if it varied more than about 7 to 10 %, meant that the magnet would not hold the deep nucleus self-oscillation, but would die out. Self-oscillation in magnetic materials is known today, but the trick is to get it at 60 Hertz etc., as Sweet could do, and to get it deeply enough that it produces negative EM energy instead of positive EM energy. Sweet could predetermine the frequency of the self-oscillation he would get after activation, and with Walt’s unit he got much more precision in his activation success.

In a French project after Sweet’s death, my French partner got self-resonance in the nuclei of carefully selected barium ferrite magnets to last for up to five weeks, but I’m under nondisclosure on that project. Two or three other folks got it to last for awhile, from a few minutes to days. During the time the self-resonance lasted, all those folks had equipment that did exhibit the VTA effect. Trouble was, the activations were not stable enough to last. Sweet’s activation would hold unless shock or other substantial disturbance occurred, in which case the magnets promptly lost their self-oscillation and their oscillating magnetic fields, and became simple “static” permanent magnets with “static” fields. Interestingly, the Russians then were shooting artificial earthquakes with their scalar interferometers, and the VTA would dramatically react to the scalar interferometry. For some years Sweet could tell me exactly which quake was natural and which was artificial. A close artificial quake would in fact sometimes explode his conditioned magnets like hand grenades, while they would sit right on top of a normal quake with no problem.

To understand the VTA at all, you simply must learn something about negative energy. Forget the “waxing eloquent” epistles of cold energy and all that in the internet chat groups, but go rigorously search out real physics information on true negative energy in physics. If you haven’t read any physics papers on negative energy, you cannot and will not understand the VTA’s negative energy conditioning or its negative energy output.  Compared to positive energy, negative energy is a dramatic alteration of spacetime and of the vacuum virtual particle flux itself.

Nuclear binding energy is negative energy, which is very different from the positive energy we are all taught to think in terms of. Check it out. If one gets self-oscillation in the barium nuclei, one is getting self-oscillating negative binding energy of the resonating nucleons. Similar self-oscillations in positive energy in thin film magnetic materials – including some of the barite compounds -- is known today in the domains, but it is a small effect and not even thought of for “power” applications. Nevertheless it is known and used.

The later versions of the VTA that I worked on did indeed exhibit oscillating fields from the conditioned magnets, instead of static and stationary fields. I placed a shim stock on one of those conditioned magnets, so that in the waving magnetic field of the magnet it rocked to and fro against the air resistance, continually fanning air and doing mechanical work. I locked that magnet with its self-waving shim stock in a safe for 24 hours, and the next day when I opened the safe the shim stock was still waving, steadily doing mechanical work on the air by “fanning” it. To get the conditioning to “take” deeply enough (i.e., to reach past the magnetic domains into the barium nuclei), Sweet did preheat the magnets in an electric oven before “shooting” them for the activation. This heating temporarily “softened” the domains, so the “shooting” of the activation would penetrate beyond them and into the nuclei. For a successful activation, it was the nuclei (the nucleons) themselves that were shocked into self-resonance at the design conditioning frequency, hence the negative energy output of the VTA.

Note that fields at much smaller distances – such as in the nuclei among nucleons – are far more powerful than the fields we experience in normal EM circuits. So very powerful forces are being manipulated in the nuclei, resulting in good strong fields in the surrounding macroscopic world.

Negative energy does indeed produce antigravity rather than normal gravity. A Dirac hole is gravitationally repelled by positive mass, and in turn the hole exerts back-repulsion or “antigravity” force upon that positive mass. Hence the fact that the Sweet VTA, once pushed to high enough output, could produce real measurable (and significant) antigravity by repulsing the earth beneath it. The successful demonstration of a reduction of the unit’s weight by 90% was a decisive confirmation of the negative energy aspects.

You do not get antigravity from positive energy components and processes. You get antigravity from negative energy components and processes.

The Sweet VTA was also a derivative of the Gabriel Kron negative resistor, which during the 1930s and early 40s was developed by Kron on a GE Navy contract utilizing  a large simulator called the “network analyzer” at Stanford University. Sweet was actually a protйgй of the great Gabriel Kron, who took a liking to him and had GE (their employer) do good things for Sweet, such as send him to university to get his master’s degree in electrical engineering. However, later parts of the project at Stanford involved highly classified electromagnetic vulnerability and ECM work, so all references to it were obliterated, including all records of Sweet’s MS at the university. But if you watched him work the equations etc., you could easily see his ability was much greater than the BS level. Sweet was also a transformer expert, and had noticed unusual phenomena in certain types of transformers under certain circumstances – including self-resonance and self-oscillation.

Here’s a small overview of negative energy, and not the usual arm-waving one so often sees.

Negative energy involves free Dirac Sea holes as source charges, so that their fields and potentials are negative energy electromagnetic fields and potentials. This is something that classical EM and electrical engineering discard and do not address. But negative energy is known in physics, even occurring in the Shroedinger equation. Dirac detested negative energy, and much of his electron theory work was in an attempt to try to get rid of it. He failed, but he steered all the physicists away from the persistent negative mass-energy holes producing negative energy EM fields and potentials, remarking that well, such holes  would be observed as positrons. That is not true at all, although it is still largely believed. In solid state physics, the hole eats an electron in the material lattice, leaving an excess positive charge in the material lattice because one negative charge disappeared from it. This lattice positron is the one chased and used by the semiconductor theory and other folks. It is not a persistent (at least momentarily) Dirac sea hold devoid of its usual electron filler, before interaction with a material lattice.

In Dirac Sea theory, the vacuum is a sea of such holes filled with electrons. The holes have negative energy (and negative energy fields) and the filling electrons have positive energy (and positive energy fields). Hence a “filled hole” is just a piece of inert vacuum, where the positive and negative energy fields sum to a vector zero resultant, and the two masses sum to a net zero mass.

 A real Dirac hole, with its usual filler electron popped out of it, has negative mass, while the positron has positive mass. One produces antigravity, the other produces normal gravity. No way can they be called the same. The reason they still use the positron is that, once the free hole is produced, it moves backward in the emf of the circuit, but it also “eats” the first electron it meets. No radiation results; that IS NOT pair annihilation which has been defined as positron and electron meeting. When a positron (positive energy) and electron (positive energy) meet and annihilate, the POSITIVE ENERGY of both remains, and energy conservation requires it be emitted as EM radiation, which it is. When an electron (positive energy) meets a hole and combines with it (falls into it), the positive energy and negative energy sum to a net zero energy, so there is no radiation. Instead, you just get a Dirac hole filled with an electron, which is just the normal Dirac sea representation of the “empty” vacuum.

That’s about as much as I can help with because of my nondisclosure agreements and my physical situation, with its severe limitation on my time. I just can’t take on any additional projects at all. But I hope it helps.

Good luck for success on your project!

Best wishes,

Tom Bearden

Thank you very much Mr Bearden. You also are one of my hero's.  

  Update 13-03-05. In the last 8 days I have changed a few things to try to get as close to the video as possible.  Much of my work is guess work and frustration is common with failure. I have had no success with the resonant coil at the bottom of the Conditioning coil. The magnetic field strength is just not enough to bring the magnets into resonance while the magnets are on top of the Conditioning coil. I started work on the 60 Hz oscillations in the Conditioning coil again and at certain power levels the circuit stops and the transistors fuse. After fusing several tens of transistors I sat back and thought about the approach I was taking. May be instead of trying to trigger the Conditioning coil via an Audio Oscillator, it would be better to use the Coil and SCR in an oscillating circuit of their own (SCR Oscillator). This circuit would also solve the problem of the Resonant coils field strength not being sufficient to bring the magnets into resonance at the top of the Conditioning coil because the starting voltage and frequency of the Conditioning coil would be the same as the Resonant coil, exactly like the video. For example the input Voltage of say 40 Volts to the Conditioning coil would give this circuit a frequency of around the 8.5 Hz of the resonating Magnet. Sitting back now this approach seems so simple. The field strength of the Resonant coil is still in question while the magnets are inside the Conditioning coil. Will the field strength be sufficient to open the molecular structure of atoms inside the domains themselves. Progress has been made. I got some Alloy tube this week to replace the PVC holder for the magnets. They measure 100mm x 150mm x 50mm and fit exactly to the magnets. I will put some pictures up tomorrow. With the information I have learned after these experiments I expect to have a full video demonstration of the first attempt at conditioning the magnets in two weeks time. This is as long as everything goes well and I don't blowup anymore hardware. I have received a lot of very good feed back. Suggestions like the Alloy tube that may have eddy current effects, to Coil structure and Circuit information. Thanks to everyone that is so extremely interested in this project.  

Click the pictures for more information.

Update 19-03-05. I have blown another Thyristor and that was the last 700 PE 160 I had. I have purchased some new 1700 PK 160's. These Thyristors are rated at 1700 Amps and 1600 Volts.  

Update 23-03-05. I thought I had a reasonable knowledge of electronics. In the past few weeks I have learnt a lot about high voltage and discharging into small coils at repetitive rates. I still have a lot to learn. Low voltage electrical experiments are easy but everything changes when the voltage increases. I now have the second Conditioning coil built. The resistance of the coil is 11.1 Ohms, the coil has 800 turns of 0.9 gauge enameled wire. The Capacitor is still 1500uf . This makes the R x C time (T = R x C) constant calculation 11.1 x 1500 = 16.66 milliseconds (60 Hz). This is the same as the video, the small difference being the capacitor was 1600uf  in the video. I will be using a 1600uf Capacitor as soon as I can get one that is rated with the right voltage.

Not using any names here but I just want to say thank you to a very special person that has helped me a lot. Thanks to the help I have received from this person, it has not only saved me money but it has also saved me time.  The world needs more people like you.  ;o)

Update 27-03-05. Today after a few weeks of things not really going to well things fell into place. The Conditioning coils pulse is almost spot on and the resonance in the magnet on top of the conditioning coil is looking to be bought in alignment with the Resonant coil at the bottom of the conditioning. I have included a video update today as well since everything is working quite well.

Video Update Low Res. 5.53 MB

Recommend to use Windows Media Player 10.

  Update 02-04-05.

Well after such a good series of tests last weekend this weekend has presented a partly expected problem. The Thyristor is latching. In other words it is staying on when the power is turned up. The thyristor is still doing its job and when it is pulsing it is pulsing nicely but when the power gets turned up it latches and that's not what we want. Back to the drawing board with this circuit and look at an alternative.

I am going to look at the video again and see if there is something in there I am missing. I am looking at another circuit called a SCR Oscillator Circuit. A thought, Triacs trigger on the zero crossing...

    Update 11-04-05.

More good news, I have got resonance on top of the big conditioning coil now after purchasing a 15 cell car battery. More power to the amp has increased the field slightly but it is still not as strong as Mr Sweet had it in the video. I am going to put this down to magnet depth and better production of the magnets now with higher field strengths.

I am still close to the first attempt of conditioning the magnets but a few small things I am not yet happy with:

1/ Time to discharge the capacitor is still causing the SCR/Thyristor to latch.

I am still thinking my direction here may not be right. I have briefly tested the SCR oscillator circuit with no success. This is what I need. Capacitor to discharge and to turn off the SCR with back EMF. This could be a single discharge of the capacitor but is more likely to be a discharge in oscillations other wise this does not explain the bulb in the video oscillating in brightness.

2/ Increase if possible the resonance affect at the top of the large coil, the blade is waving or oscillating but is is fairly lightly oscillating.

There is a bit of a delicate balance in this setup for the conditioning. Tuning and adjusting after time will give the desired results here and I hope we get the results with the magnets after this is all done. I am thinking more and more that it will. I found these quite good articles about magnets also there is some mentions of instabilities of the magnets and that's what I think we are going after. Click Here.

Something I am finding interesting is the amount of pages on the net that have been taken down when you search for "Spin wave instability magnon distribution for parallel pumping". Interesting ;o) Lucky I have a few books about this phenomena.

Update 16-04-05. Hi Everyone.

Today proved to be a very important day in the SQM Replication project. I added another coil to the conditioning coil to try to get the resonance in the magnets and also used the Resonance coil at the bottom of the Conditioning Coil. This works really well. Another surprise is the pulsing of the Conditioning coil in conjunction with this new coil pulsing is switching the conditioning coil with no latching. I am getting much closer to the desired results.

  Update 17-04-05. Hi Everyone,

Something I have noticed today is that the video camera has some interference from the coils pulsing. This is very interesting because this has never happened before now. I wonder if it is a sign. I had to redo the video because the video was jittery. Some of the effects of the waving of the blade (Magnets Resonance) has not come up as well as I would have liked. There is much more of a resonance effect than what is shown in the video.

Magnets resonant frequencies.

  Magnet 1.

 8.18 Hz and 24.46 Hz

Magnet 2.

8.64 Hz and 25.95 Hz

  I included some small Ideas and pics into the last update also. I was going to hold off but I thought it was relevant. This was the update on the 11-04-05. This is what I was thinking about through the week and I have got to the point now where I am questioning everything.

All in all this week we have achieved a few more goals and next week we will achieve some more. The more I think about this project, and it is on my mind 24/7, I really think this is going to work. It might be to early to make a big call like that but it is a gut feeling. Zero crossing of the pulsing trigger and the possibility of an oven as Mr Bedini said may just be enough to make the SQM work again.

I have been working on a bit of a movie for the SQM replication also. 

More Information coming soon.

Video Update Low Res. 5.8mb

Video Update High Res. 28.8mb

Recommend to use Windows Media Player 10.    

Update 20-04-05. While some thoughts were going through my head I decided to write them down. I came up with this summary.

Click Here.  

Update 28-04-05. Tests on the magnets with the conditioning setup have now started. The setup is very close to the video and I believe the electro magnetic fields are the same as in the video. I am currently having no problems with the pulsing of the Conditioning coils of Resonant coils. I have my clock ticking and will be interested in how long it takes before a result is known. I will hopefully have video posted in the next few days.

Click Here. Update 05-05-05. Hi Everyone. In tests I have recently done I have broken the magnets. "Not happy Jan" ;O(

Well my clumsy accident was spend in days of anger with myself about trying to get things done quickly and not being careful. I have done some research and on American Antigravity I listened to this Interview: http://www.americanantigravity.com/graphics/interviews/John-Searl.wma

You have to listen to this. Mr John Searle claims to have a oscillating magnetic field in a metal object or a magnet. This is the most important information if it is true in all our existence of scientific history. This is an extremely important discovery that will change our lives for ever.

  Update 12-05-05. Hi Everyone, Experiments are still continuing. No results are known yet but I am thinking there is an extra component that is needed. Heat, like Mr Bedini, and Mr Bearden said. I thought an extra component would be needed but just wanted to satisfy myself that the Video it not entirely correct in "The way the conditioning is done".

I will be looking at heat treatment of the magnets to get the Oscillations we are after. Atomic Oscillations are known and we will get this achieved, we must. The reason why this is so extremely important is in the video provided on the right hand side.

We have polluted our Planet for over a hundred years and when we realize we need to stop it will take a thousand years to clean it up. This is not the burden I want to leave to our next generation. We cant have our Children clean up after us. Weather patterns have changed drastically over the last twenty years and if this is not enough of a sign then what is.

Click Here. Update 14-05-05. Hi Everyone.

Today's Update is big. This is the first video update of the conditioning attempt of the magnets. The attempt is as close to the video as possible, with an explanation as to the procedure from the video, and my procedure. Although I have no output voltage or Current yet, there appears to be a oscillation from the magnets with the scope probes on the magnets. I realize this most likely doesn't mean the magnets themselves are oscillating. The Oscilloscope will produce a sine wave output when the probe is placed on most solid materials on low settings. For example a lump of Alloy will give off a sine wave if the probe is affixed to it or even your hand if you touch it. I need to investigate this further, as I am not over looking anything. One magnet appears to be oscillating more than the other. There are also some Documents I have been sent by some very kind people. The documents are attached in the Update page on the side.

On a skeptic note. It is most probably a coincidence but a military Helicopter, after I shot the Video, came down from the north and did three circles around my general area... then left again. We do get a lot of choppers around here but not normally military. I just had to take a picture and post it also.

The really good thing is that I now have and can increase the discharge voltage to the capacitor at more than 200 Volts with no problems at the desired frequency. Sorry about the size of the Video and res, I have run into some problems with space on my site and want to be careful on the size of the videos I am now Uploading. If you would like to see higher resolution please email me.

I must apologize as the last week was very busy at work and I may sound a bit on the vague side in the video. I hope not too much.

Video Update Low Res. 13mb

Recommend to use Windows Media Player 10.  

Update 15-05-05. Hi Everyone I have decided to publish the information I was given as it is very important and think a no answer is a yes. If the Author would like it removed please email me. I have removed the name of the Author until I hear from the Author. I have also put a link up for a good java applet to show the E-Field. More experiments are continuing and I will update the SQM page soon. 

Click Here. Update 18-05-05. I have today received an Email from the magnet supplier saying that BaFe is no longer being used even though the Site still advertises BaFe magnets. Buyer beware...

I have another supplier that is advertising BaFe. Can it only be confirmed by testing the magnets, I suppose.

New Supplier: http://www.magnets.com.cn/in2h.htm

  Update 22-05-05. This weekend I thought about what is really needed for the magnets to have their structure changed by the conditioning process. I tried a few things. I heated the magnets to 200 Degrees Celsius (170 Deg Celsius is safer, sometimes the magnets will crack and break if heated too much) and used much higher values of capacitors. 21500uf at 200 Volts was discharged into the Conditioning Coil. Some math is included in this weekends update also which makes some sense of why last weekends Conditioning attempt failed to achieve any results.

Some good information came from this weekends experiments and I think already more information has been learned in the past three months than a whole year of research into the SQM.

More coming soon, Oh I am thinking of trying to get a SQM experimenters video conference started for those interested in the SQM Project. Maybe a once a month thing, if you are interested please email me.

Detailed diagrams, pictures, and video will be posted regularly. Public feed back is encouraged and input will be added to the experiments as time goes on.

Check out our Forum.  

Disclaimer. If you are electronically inclined then I strongly encourage you to build this conditioning setup and test it. Working with High Voltage is very dangerous and could be lethal. This is not work that is to be taken lightly. Hyiq.org accepts no responsibly for harm to ones self or damage to equipment. This information on the hardware setup is provided free for public use but is under testing and could change at any time.

Note:

All information contained on this page is public domain and NOT for commercial use.

hyiq.org is non profit organization and this project is funded entirely on the funds we raise and from our own pockets. Anyone that makes money from this information must consent hyiq.org before doing so.