104

Automated Playback (Slide Show)

Use this feature to automatically play back all of the images in the memory card. The LCD monitor displays each image for approximately 3 seconds.

1 Select [Slide Show].

1.Press the MENU button.

2.In the menu, use the S or T

button to select .

3. Press the FUNC./SET button.

2 Select an effect.

1.Use the W or X button to select ,

or .

3 Start the slide show.

1. Press the FUNC./SET button.

•The following functions are available during slide shows.

-Pausing/resuming the slide show: Press the FUNC./SET button

-Fast forwarding/rewinding: Press the W or X button (holding down the button will increase the speed of the fast forward)

-Stop the slide show: Press the MENU button

In Single Playback mode, you can start a slide show from the currently displayed image by holding the FUNC./SET button while you press the button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date.

105

Red-Eye Correction Function

You can correct red eyes in recorded images.

Since red eyes may not be automatically detected on some images or may not be corrected as expected, you are recommended to use the [New File] function to save important images under a different name.

Examples:

1 Select [Red-Eye Correction].

1. Press the MENU button. 2. In the menu, use the S or T

button to select .

3. Press the FUNC./SET button.

2 Select an image.

1.Use the W or X button to select the image you wish to correct red eyes.

2.Press the FUNC./SET button.

•A frame will automatically display where red-eye is detected.

•If red-eye is not automatically

detected, select [Add Frame] with W or X button and press FUNC./SET button (p. 108).

•To cancel the correction frame, select [Remove Frame] and press the FUNC./SET button (p. 109).

106

3 Correct the image.

1.Use the W or X button to select [Start].

2.Press the FUNC./SET button.

4 Save the image.

1.Use the W or X button to select [New File] or [Overwrite].

2.Press the FUNC./SET button.

•[New File]: Saved as new file with a new name. The uncorrected image is stored. The new image is stored as the last file.

•[Overwrite]: Saved with the same file name as the uncorrected image. The uncorrected image is erased.

•When [New File] is selected, proceed to Step 5.

•To continue correcting red-eyes in other images, return to Step 2.

5 Display the saved image.

1.Press the MENU button.

2.Use the W or X button to select [Yes].

3.Press the FUNC./SET button.

•Selecting [No] returns to the menu.

zRed-eye correction cannot be performed on movies.

zOverwriting cannot be performed on protected images.

107

zWhen there is not enough space left on the memory card, red-eye correction cannot be performed.

zAlthough you can apply red eye correction any number of times to an image, the image quality will gradually deteriorate with each application.

zSince the correction frame will not appear automatically on images that have already been corrected once with the

(Red-Eye Correction) function, use the [Add Frame] option to correct them.

108

Add Correction Frame

1 Select [Add Frame].

1.Use the W or X button to select [Add Frame].

2.Press the FUNC./SET button.

• A green frame will display.

2 Adjust the position of the frame.

1.Use the S, T, W or X button to move the frame.

•Press the FUNC./SET button to switch to the Frame Size Change mode and you can change the size of the frame with the S or T buttons. Press the FUNC./SET button again to restore the Frame

Shift mode, allowing you to adjust the position of the correction frame.

3 Add a correction frame.

1. Press the button.

•The correction frame will be added and the frame color will change to white.

•Press the button to add additional frames.

•Up to 35 frames may be added.

•Press the MENU button to finish adding correction frames.

To correctly perform red-eye correction, please note the following (refer to the image in Step 2 above):

-Adjust the correction frame size so that it only surrounds the red-eye portion to be corrected.

-When there are several subjects with red-eye, be sure to add one correction frame per subject.