■Overview (continued)

M66

Marine version

Corresponding to the requirements of the marine classification societies Lloyds Register, American Bureau of Shipping, Germanischer Lloyd or Det Norske Veritas, individual acceptance tests are carried out in the factory.

M90

Crane transport aid (mounted at the top)

A top-mounted crane transport assembly can be ordered as an option for SINAMICS DC MASTER Cabinet. Depending on the

width of the cabinet, it consists of either transport eyebolts (width ≤ 1 600 mm) or transport rails (width > 1 600 mm).

Other options

F03

Equipment acceptance with customer present: visual acceptance

The acceptance scope includes:

•The degree of protection is checked

•The integrated components are checked to ensure that they are complete (checked against the parts list)

•The equipment codes are checked

•The clearance and creepage distances are checked

•The cable tags are checked

•Customer documentation is checked

•Acceptance report is handed over

All the above checks are performed with the equipment in a no-voltage condition.

F97

Equipment acceptance with customer present: customer-spe- cific acceptance

Q80 to Q85

Extension of the liability for defects

A detailed description of the options is provided in the catalog section, Services, Section Service & Support under Liability for defects.

U09

Version according to UL Listing

The converter cabinet is designed and built corresponding to UL specifications. The option does not include any certification. Individual certification can be performed in the factory after prior agreement.

X30

Customer-specific requirement

If options are requested, which are not covered by the catalog, customer-specific requirements can be ordered specifying order code X30 on request and following technical clarification.

Y09

Special cabinet paint finish

As standard, the drive cabinets are delivered in RAL 7035. The special paint finish must be specified in plain text when ordering.

All RAL colors which are available as powder coatings can be 4 selected. If roof sections or canopies (order code M21), top cov-

ers (codes M23/M43/M54 ) are required for the drive cabinets, these will also be painted the same color as the cabinet. The molded plastic parts (e.g. ventilation grilles) as well as options such as cable marshaling space (order code M07) are finished in RAL 7035, and cannot be painted. A special paint finish is also not available for the optional socket (option M06).

Y32

Labeling plate to identify the system, two lines, 40 × 180 mm

If acceptance tests are requested, which are not covered by option F03, customized acceptance tests/supplementary tests can be ordered using order code F97 on request and following technical clarification.

K07

Without Advanced Operator Panel AOP30

The Advanced Operator Panel AOP30 is not provided. The AOP30 is not installed in the cabinet door and is not supplied the equipment.

90

L91

Commissioning interface (PROFIBUS) brought out

The commissioning interface (PROFIBUS) is brought through the cabinet door of the control cabinet. This interface is intended for commissioning purposes only and cannot be used to continually control the drive. The cable entry in the cabinet is equipped with a protective cover.

Plastic labels (white with black engraving) are available to mark the drive cabinets. The labels are glued to the cabinet door.

Dimensions H × W: 40 × 180 mm.

The text must be specified in plain text when ordering. Field 1: Max. 9 characters, font size 10 mm

Field 2: Max. 9 characters, font size 10 mm Field 3: Max. 20 characters, font size 10 mm.

■Overview (continued)

Documentation

D02

Customer documentation (circuit diagram, terminal diagram, layout diagram) in the DXF format

Option D02 can be used to order documents such as circuit diagrams, terminal diagrams, layout diagrams, and dimension drawings in the DXF format, e.g. for further processing in AutoCAD systems.

D04

Customer documentation, paper

Equipment documentation is supplied electronically on DVD as standard. If the customer also requires a hard copy of the documentation and selects option D04, the following documents will be included in a document folder with the converter cabinet:

•Operating instructions

•Circuit diagram

•Terminal diagram

•Layout diagram

•Dimension drawing

Independent of selecting option D04, safety and transport 4 instructions, the circuit manual with circuit diagram, terminal

diagram, single-line block diagram and layout diagram as well as the dimension drawing are always provided as hard copy in the drive cabinet.

Note:

The documentation language is selected using options D58 to D80 (standard, German and English).

D14

Preliminary customer documentation

If documents such as circuit diagrams, terminal diagrams, layout diagrams and dimension drawings are required in advance for the purpose of system engineering (integration of drive into higher-level systems, interface definition, installation, building planning, etc.), it is possible to order a draft copy of the documentation when ordering. These documents are then supplied electronically a few working days after the order has been clarified. For project-specific, special solutions, option D14 is only available on request.

D19

Circuit diagram prepared for motor overtemperature monitoring using a limit value transmitter

The evaluation is realized using an isolated signaling contact in the motor (order code A31 according to Catalog DA 12 · 2008, Protection and monitoring).

D20

Circuit diagram prepared for motor temperature monitoring

PT100, PT1000, KTY84-130, PTC or NTC motor temperature monitoring devices can be directly evaluated in the SINAMICS DC MASTER. When specifying the option, for the corresponding temperature input, this is documented in the circuit diagram. The customer connection is realized at the TMC terminal adapter.

D21

Circuit diagram prepared for speed actual value sensing (pulse encoder)

The connection of the speed actual value sensing using a pulse encoder is shown in the circuit diagram. The customer connection is realized at the TMC terminal adapter.

D22

Circuit diagram prepared for speed actual value sensing (analog tachometer)

The connection of the speed actual value sensing using an analog tachometer is shown in the circuit diagram. The customer connection is established at the power interface of the SINAMICS DC MASTER.

D58 to D80

Documentation language

The following options refer to the operating instructions and the List Manual for SINAMICS DC MASTER DC Converter as well as the standard information texts in the circuit diagram. Parts lists are in English/German.

Packing

M91

Packaging type: wooden crate

Cabinet bolted to a pallet, air cushion + shrink foil + additional air cushion at the top. Wooden frame with approximate 100 mm clearance to the cabinet, nailed with wooden strips with approximately 200 mm space between them (low level of protection against mechanical damage).

M92

Packaging type: crate, packed for air freight

Cabinet bolted to a pallet, air cushion + shrink foil + additional air cushion at the top. Packed in a wooden crate.

M93

Packaging type: crate, seaworthy packaging

Cabinet bolted to a pallet, air cushion + aluminum foil + air cushion at the top, desiccant added, and welded, vacuum sealed and packed in a wooden crate.

M94

Packaging type: additional packaging data IPPC ISPM15 (according to country-specific regulations)

Protection against insects that can cause damage, all of the wooden parts manufactured out of plywood. The factory is certified for packing according to ISPM15.