Статьи на перевод PVDF_P(VDF-TrFE) / 2012-Dodds,J-Thesis (Development of Piezoelectric Zinc Oxide Nanoparticle-Poly(Vinylidene Fluoride))

79

10.Moore, M., et al., Reliability of visual inspection for highway bridges, Volume I: final report. 2006, National Technical Information Service: Alexandria, VA. p. 1- 516.

11.Ahlborn, T.M., et al., The State-of-the-Practice of Modern Structural Health Monitoring for Bridges: A Comprehensive Review. 2010, Transportation Research Board. p. 66.

12.Kersey, A.D., A review of recent developments in fiber optic sensor technology. Optical Fiber Technology, 1996. 2(3): p. 291-317.

13.Moyo, P., et al., Development of fiber Bragg grating sensors for monitoring civil infrastructure. Engineering Structures, 2005. 27: p. 1828-1834.

14.Celebi, M., Seismic instrumentation of buildings (with emphasis on federal buildings), in Technical Report No. 0-7460-68170, U.S.G. Survey, Editor. 2002, United States Geological Survey: Menlo Park, CA.

15.Doebling, S.W., C.R. Farrar, and M.B. Prime, A summary review of vibrationbased damage identification methods. Shock and Vibration Digest, 1998. 30(2): p. 91-105.

16.Chang, P.C., A. Flatau, and S.C. Liu, Review Paper: Health Monitoring of Civil Infrastructure. Structural Health Monitoring, 2003. 2(3): p. 257-267.

17.Lynch, J.P. and K.J. Loh, A summary review of wireless sensors and sensor networks for structural health monitoring. Shock and Vibration Digest, 2006. 38(2): p. 91-128.

18.Ulusoy, H.S., M.Q. Feng, and P.J. Fanning, System identification of a building from multiple seismic records. Earthquake Engineering & Structural Dynamics, 2011. 40(6): p. 661-674.

80

19.Chintalapudi, K., et al., Monitoring civil structures with a wireless sensor network. Internet Computing, IEEE, 2006. 10(2): p. 26-34.

20.Harms, T., S. Sedigh, and F. Bastianini, Structural health monitoring of bridges using wireless sensor networks. Instrumentation & Measurement Magazine, IEEE, 2010. 13(6): p. 14-18.

21.Kim, S., et al. Wireless sensor networks for structural health monitoring. in Proceedings of the 4th international conference on Embedded networked sensor systems. 2006: ACM.

22.Sumitro, S. and M. Wang, Sustainable structural health monitoring system. Structural Control and Health Monitoring, 2005. 12(3-4): p. 445-467.

23.Mascarenas, D.D.L., et al., Development of capacitance-based and impedancebased wireless sensors and sensor nodes for structural health monitoring applications. Journal of Sound and Vibration, 2010. 329: p. 2410-2420.

24.Nagayama, T. and B.F. Spencer, Jr., Structural health monitoring using smart sensors, in NSEL Report Series, NSEL, Editor. 2007, University of Illinois at Urbana-Champaign: Urbana-Champaign, IL.

25.Chopra, I., Review of state of art of smart structures and integrated systems. AIAA Journal, 2002. 40(11): p. 2145-2187.

26.Defaÿ, E., ed. Integration of Ferroelectric and Piezoelectric Thin Films. 2011, John Wiley & Sons, Inc.: Hoboken, NJ. 404.

27.Broadhurst, M.G. and G.T. Davis, Physical basis for piezoelectricity in PVDF. Ferroelectrics, 1984. 60: p. 3-13.

28.Harrison, J.S. and Z. Ounaies, Piezoelectric Polymers, in ICASE. 2001, NASA: Hampton, Virginia.

81

29.Trolier-McKinstry, S. and P. Muralt, Thin film piezoelectrics for MEMS. Journal of Electroceramics, 2004. 12(1): p. 7-17.

30.Gu, Y., L. Tong, and P. Tan, Surface strain distribution method for delamination detection using piezoelectric actuators and sensors, in Journal of Physics: Conference Series. 2011, IOP Publishing. p. 1-10.

31.Raghavan, A. and C.E.S. Cesnic, Review of guided-wave structural health monitoring. Shock and Vibration Digest, 2007. 39(2): p. 91-114.

32.Setter, N., et al., Ferroelectric thin films: Review of materials, properties, and applications. Journal of Applied Physics, 2006. 100(5): p. 051606-051606-46.

33.Polla, D.L. and L.F. Francis, Processing and characterization of piezoelectric materials and integration into microelectromechanical systems. Annual Review of Materials Science, 1998. 1998(28): p. 563-597.

34.Chen, X., S. Guo, and Y. Shi, Acoustic emission transducer based on PZT nanofibers, in MEMS 2012. 2012, IEEE: Paris. p. 1301-1304.

35.Guyomar, D., et al., Passive impact location estimation using piezoelectric sensors. Structural Health Monitoring, 2009. 8(5): p. 357-367.

36.Kawai, H., The piezoelectrcity of poly (vinylidene fluoride). Japanese Journal of Applied Physics, 1969. 8: p. 975-976.

37.Vinogradov, A. and F. Holloway, Electro-mechanical properties of the piezoelectric polymer PVDF. Ferroelectrics, 1999. 226(1): p. 169-181.

38.Greeshma, T., et al., The influence of individual phases on piezoelectric coefficient of PZT-PVdF composites. Ferroelectrics, 2009. 393(1): p. 88-93.

82

39.Lowe, M.J.S., Matrix techniques for modeling ultrasonic waves in multilayered media. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 1995. 42(4): p. 525-542.

40.Rose, J.L. and P.B. Nagy, Ultrasonic waves in solid media. The Journal of the Acoustical Society of America, 2000. 107: p. 1807.

41.Muralt, P., Ferroelectric thin films for micro-sensors and actuators: a review. J. Micromech. Microeng., 2000. 10: p. 136-146.

42.Park, G., et al., Overview of Piezoelectric Impedance-based Health Monitoring and Path Forward. The Shock and Vibration Digest, 2003. 35(6): p. 451-463.

43.Mascarenas, D.L., et al., Development of an impedance-based wireless sensor node for structural health monitoring. Smart Materials and Structures, 2007. 16(6): p. 2137-2145.

44.Park, S., et al., PZT-based active damage detection techniques for steel bridge components. Smart Materials and Structures, 2006. 15: p. 957-966.

45.Inman, D.J., J. Farmer, and B.L. Grisso, Energy Harvesting for Autonomous Sensing. Key Engineering Materials, 2007. 347: p. 405-410.

46.Quek, S.T., P.S. Tua, and J. Jin, Comparison of plain piezoceramics and interdigital transducer for crack detection in plates. Journal of Intelligent Material Systems and Structures, 2007. 18: p. 949-961.

47.Fromme, P., et al., On the development and testing of a guided ultrasonic wave array for structural integrity monitoring. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2006. 4: p. 777-785.

83

48.Gao, H., et al. Ultrasonic Guided Wave Annular Array Transducers for Structural Health Monitoring. in Quantitative Nondestructive Evaluation. 2006. Brunswick, ME: AIP.

49.Akdogan, E.K., M. Allaverdi, and A. Safari, Piezoelectric composites for sensor and actuator applications. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 2005. 52(5): p. 746-775.

50.Newnham, R.E., D.P. Skinner, and L.E. Cross, Connectivity and piezoelectricpyroelectric composites. Materials Research Bulletin, 1978. 13: p. 525-536.

51.La Saponara, V., D.A. Horsley, and W. Lestari, Structural Health Monitoring of Glass/Epoxy Composite Plates Using PZT and PMN-PT Transducers. Journal of Engineering Materials and Technology, 2011. 133(1): p. 011011-1-8.

52.Dietze, M. and M. Es-Souni, Structural and functional properties of screenprinted PZT-PVDF-TrFE composites. Sensors and Actuators A: Physical, 2007. 143: p. 329-334.

53.Zak, A., et al., Experimental and theoretical dielectric studies of PVDF/PZT nanocomposite thin films. Ceramics International, 2011. 37(5): p. 1653-1660.

54.Lam, K. and H. Chan, Piezoelectric and pyroelectric properties of 65PMN35PT/P (VDF-TrFE) 0–3 composites. Composites science and technology, 2005. 65(7): p. 1107-1111.

55.Arlt, K. and M. Wegener, Piezoelectric PZT / PVDF-copolymer 0-3 composites: aspects on film preparation and electrical poling. Dielectrics and Electrical Insulation, IEEE Transactions on, 2010. 17(4): p. 1178-1184.

84

56.Thostenson, E.T. and T.W. Chou, Aligned multi-walled carbon nanotubereinforced composites: processing and mechanical characterization. Journal of physics D: Applied physics, 2002. 35(16): p. L77.

57.Benetti, M., et al., Growth of AlN piezoelectric flim on diamond for high-frequency surface acoustic wave devices. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2005. 52(10): p. 1806-1811.

58.Tjhen, W., et al. Properties of piezoelectric thin films for micromechanical devices and systems. in Micro Electro Mechanical Systems, 1991, MEMS'91, Proceedings. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots. IEEE. 1991: IEEE.

59.Hoummady, M., A. Campitelli, and W. Wlodarski, Acoustic wave sensors: design, sensing mechanisms and applications. Smart Materials and Structures, 1999. 6(6): p. 647.

60.Kim, Y., et al., ZnO films on {001}-cut< 110>-propagating GaAs substrates for surface acoustic wave device applications. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 1995. 42(3): p. 351-361.

61.Kon, S. and R. Horowitz, A high-resolution MEMS piezoelectric strain sensor for structural vibration detection. Sensors Journal, IEEE, 2008. 8(12): p. 2027-2035.

62.Viljoen, H. and N. van Rensbure, Damage detection in composites by ZnO sensors. AIChE journal, 1996. 42(4): p. 1101-1107.

63.Tu, Z.C. and X. Hu, Elasticity and piezoelectricity of zinc oxide crystals, single layers, and possible single-walled nanotubes. Physical Review B, 2006. 74(3): p. 035434-1-6.

85

64.Wang, Z.L., Zinc oxide nanostructures: growth, properties and applications. Journal of Physics: Condensed Matter, 2004. 16(25): p. R829-R858.

65.Schmidt-Mende, L. and J.L. MacManus-Driscoll, ZnO–nanostructures, defects, and devices. Materials today, 2007. 10(5): p. 40-48.

66.Ahmad, M. and J. Zhu, ZnO based advanced functional nanostructures: synthesis, properties and applications. J. Mater. Chem., 2010. 21(3): p. 599-614.

67.Huang, Y., X. Bai, and Y. Zhang, In situ mechanical properties of individual ZnO nanowires and the mass measurement of nanoparticles. Journal of Physics: Condensed Matter, 2006. 18(15): p. L179.

68.Loh, K. and D. Chang, Zinc oxide nanoparticle-polymeric thin films for dynamic strain sensing. Journal of Materials Science, 2010. 46(1): p. 228-237.

69.Xu, S., et al., Self-powered nanowire devices. Nature Nanotechnology, 2010. 5: p. 366-373.

70.Gullapalli, H., et al., Flexible piezoelectric ZnO-paper nanocomposite strain sensor. Small, 2010. 6(15): p. 1641-1646.

71.Dodds, J.S., F.M. Meyers, and K.J. Loh, Piezoelectric Characterization of PVDFTrFE Thin Films Enhanced with ZnO Nanoparticles. Sensors Journal, IEEE, 2012.

72.Devi, P.I. and K. Ramachandran, Dielectric studies on hybridised PVDF-ZnO nanocomposites. Journal of Experimental Nanoscience, 2011. 6(3): p. 281-293.

73.Gaur, M.S. and A.P. Indolia, Thermally stimulated dielectric properties of polyvinylidenefluoride–zinc oxide nanocomposites. Journal of Thermal Analysis and Calorimetry, 2011. 103(3): p. 977-985.

86

74.Öğüt, E., et al. Poly(vinylidene fluoride)/Zinc Oxide Smart Composite Materials. in Behavior and Mechanics of Multifunctional and Composite Materials. 2007: SPIE.

75.Zhang, Y., et al., Evolution of bias field and offset piezoelectric coefficient in bulk lead zirconate titanate with fatigue. Applied Physics Letters, 2005. 86(1): p. 012910.

76.McKinney, J.E., G.T. Davis, and M.G. Broadhurst, Plasma poling of poly(vinylidene fluoride): Piezoand pyroelectric response. Journal of Applied Physics, 1980. 51(3): p. 1676-1681.

77.Bharti, V., T. Kaura, and R. Nath, Ferroelectric hysteresis in simultaneously stretched and corona-poled PVDF films. Dielectrics and Electrical Insulation, IEEE Transactions on, 1997. 4(6): p. 738-741.

78.Hilczer, B., et al., The method of matching resonance frequencies in coupled transmitter PVDF/TRFE diaphragms. Dielectrics and Electrical Insulation, IEEE Transactions on, 2000. 7(4): p. 498-502.

79.Ramaratnam, A. and N. Jalili, Reinforcement of piezoelectric polymers with carbon nanotubes: pathway to next-generation sensors. Journal of Intelligent Material Systems and Structures, 2006. 17: p. 199-208.

80.Zhang, Y., In situ fatigue crack detection using piezoelectric paint sensor. Journal of Intelligent Material Systems and Structures, 2006. 17: p. 843-852.

81.Giurgiutiu, V., Tuned lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring. Journal of Intelligent Material Systems and Structures, 2005. 16: p. 291-305.

87

82.Su, Z. and L. Ye, Activating and receiving Lamb waves, in Lecture notes in applied and computational mechanics, F. Pfeiffer and P. Wriggers, Editors. 2009, Springer: Berlin. p. 1-341.

83.Giurgiutiu, V. Embedded ultrasonics with piezoelectric wafer active sensors for structural health monitoring of thin-wall structures. in ASME International Mechanical Engineering Conference. 2003. Washington, DC: ASME.

84.Hay, T.R. and J.L. Rose, Flexible PVDF comb transducers for excitation of axisymmetric guided waves in pipe. Sensors and Actuators A: Physical, 2002. 100: p. 18-23.

85.Gachagan, A., G. Hayward, and R. Banks, A flexible piezoelectric transducer design for efficient generation and reception of ultrasonic Lamb waves. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 2005. 52(7): p. 1175-1182.

86.Wang, X., Y. Lu, and J. Tang, Damage detection using piezoelectric transducers and the lamb wave approach. Smart Materials and Structures, 2008. 17: p. 1-15.

87.Monkhouse, R.S.C., et al., The rapid monitoring of structures using interdigital Lamb wave transducers. Smart Materials and Structures, 1999. 9(2000): p. 304309.

88.Viktorov, I.A., Rayleigh and Lamb waves: Physical theory and applications. 1967, New York: Plenum Press. 154.

89.Gu, H. and M.L. Wang, A Monolithic Interdigitated PVDF Transducer for Lamb Wave Inspection. Structural Health Monitoring, 2009. 8(2): p. 137-148.

90.Chan, C.W. and P. Cawley, Lamb waves in highly attenuative plastic plates. Journal of the Acoustical Society of America, 1998. 104(2): p. 874-881.

88

91.Bellan, F., et al., A new design and manufacturing process for embedded lamb waves interdigital transducers based on piezopolymer film. Sensors and Actuators A: Physical, 2005. 123-124: p. 379-387.

92.Okabe, Y. and F. Nakayam, Damage Detection in CFRP Laminates by Ultrasonic Wave Propagation Using MFC Actuator and FBG Sensor. T Jpn I Met, 2009. 7(26): p. 7-12.

93.Han, J., C.-G. Kim, and J.-Y. Kim, The propagation of lamb waves in a laminated composite plate with a variable stepped thickness. Composite Structures, 2006. 76: p. 388-396.

94.Clarke, T., et al., Evaluation of the damage detection capability of a sparse-array guided-wave SHM system applied to a complex structure under varying thermal conditions. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 2009. 56(12): p. 2666-2678.

95.Croxford, A., et al., Strategies for guided-wave structural health monitoring. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 2007. 463(2087): p. 2961-2981.

96.Bingham, J., M. Hinders, and A. Friedman, Lamb wave detection of limpet mines on ship hulls. Ultrasonics, 2009. 49(8): p. 706-722.

97.Alleyne, D.N. and P. Cawley, Optimization of lamb wave inspection techniques. NDT&E International, 1992. 25(1): p. 11-22.

98.Song, G., et al., Concrete structural health monitoring using embedded piezoceramic transducers. Smart Materials and Structures, 2007. 16: p. 959-968.

99.Cawley, P. and D.N. Alleyne, The use of lamb waves for the long range inspection of large structures. Ultrasonics, 1996. 34: p. 287-290.