Хорошев / ИЛП_материал_маг_02.15 / DEF STAN 00-60 / Issue 4 / Part 0 - Annex C - Data dictionary and related technical inf

C.12.8 Table HH, Overhaul-Kit Next Higher Assembly PLISN. This Table contains all Next Higher Assembly (NHA), kit or overhaul PLISNs, any associated NHA PLISN Indicators, and Overhaul Replacement Rates. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN type (LCNTYPXB) and NHA PLISN (NHAPLIHH). NHA PLISN shall be a PLISN contained in Table XC (PLISNOXC) or Table HG (PLISNOHG) with an identical PCCN (PCCNUMXC). For a given row of information, the following cross-element edit applies to Table HH:

(a) If Spare Parts Classification (DED 684) in Table HA is ‘1’ then Overhaul Replacement Rate (OVHREPHH) shall not be blank.

C.12.9 Table HI, Provisioning Remark. This Table contains text remarks associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), Provisioning Narrative Code (PRVNACHI) and Provisioning Text Sequencing Code (TEXSEQHI).

The Provisioning Narrative Codes (DED 667) correspond to the different types of narrative. The following list gives each of these codes, related narrative title, and DED number to refer to for an understanding of the information that needs to be input:

C-101

DEF STAN 00-60 (PART 0)/4

ANNEX C

C.12.10 Table HJ, Provisioning Reference Designation. This Table contains Reference Designations associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), and, Reference Designation (REFDESHJ). Non-identifying keys, Technical Manual (TM) Code (TMCODEXI), Figure Number (FIGNUMHK) and Item Number (ITEMNOHK) migrate from Table HK, if applicable, on matching foreign keys.

C.12.11 Table HK, Parts Manual Description. This Table contains Repair Parts Manual data associated with a part application for provisioning. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), TM Code (TMCODEXI), Figure Number (FIGNUMHK), and Item Number (ITEMNOHK). For a given row of information, the following cross-element edits apply to Table HK:

(a) Initial Provisioning Project Number migrates from Table HU, as non-identifying data.

C-102

DEF STAN 00-60 (PART 0)/4

ANNEX C

(b)Document Code (WIBBLEXB) Table XB shall be established for the same LCN entry (LSACONXB) in Table XB prior to Item Sequence Number (ITSNSNHK and ITSNVNHK) being established in this Table.

(c)If Refer To (TEIRTXHK) is entered ISN (ITSNSNHK and ITSNVNHK) shall not be blank.

NOTE: Total Quantity Per Location (TEITQLHK) should equate to Quantity Per Assembly (QTYASYHG) from Table HG if ‘option 2’ is used.

C.12.12 Table HL, Parts Manual Provisioning Nomenclature. This Table contains text for repair parts manual data associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), TM Code (TMCODEXI), Figure Number (FIGNUMHK), Item Number (ITEMNOHK) and Parts Manual Text Sequencing Code (TEXSEQHL). For a given row of information, the following cross-element edit applies to Table HL:

C-103

DEF STAN 00-60 (PART 0)/4

ANNEX C

(a) If IPPN Subject (TEIIPSHG) is entered in Table HG, for the first Text Sequencing Code (TEXSEQHL) in any record for matching values of CAGECDXH, REFNUMHA, EIACODXA, LSACONXB, ALTLCNXB and LCNTYPXB in Table HG, the first 19 characters of narrative shall match the IPPN Subject (TEIIPSHG).

C.12.13 Table HM, Item Basis of Issue. This Table contains part manual (tool list) Basis Of Issue (BOI) information. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA) and BOI Control (BOICTRHM). For a given row of information, the following cross-element edits apply to Table HM:

(a)Either BOI-Level (LVLBOIHM) or BOI-End Item (RATIOBHM) shall be entered to establish a row of information in this Table. When one of these is entered, the other shall be blank. Each LVLBOIHM and RATIOBHM value shall be a unique value for a given Reference Number and CAGE combination.

(b)A PLCC (DDPLCCHA) entry shall be contained in Table HA, and an entry in Table HK for the item Reference Number and CAGE combination shall occur prior to an entry in this Table.

C.12.14 Table HN, Provisioning Serial Number Usable On Code. This Table relates a part application to the applicable System/EI Serial Number (S/N) and S/N UOC associated with the part application. Please refer to Table XD. Table keys include all columns. Table keys CAGECDHN, REFNUMHN, LSACONHN, and ALTLCNHN migrate from Table HG. Table keys LCNSEIHN, ALCSEIHN, FRSNUMHN, and TOSNUMHN migrate from Table XD. EIACODXA and LCNTYPXB are identical in both Tables XD and HG.

C-104

C.12.15 Table HO, Provisioning System/End Item Usable On Code. This Table relates a part application to the applicable System/EI UOCs and Provisioning Contract Control Number (PCCN) associated with the part application. Table keys include all columns. Table keys CAGECDHO, REFNUMHO, LSACONHO, and ALTLCNHO migrate from Table HG. Table keys LCNSEIHO and ALCSEIHO migrate from Table XC, from which UOCs and the PCCN are extracted. EIACODXA and LCNTYPXB are identical in both Tables XC and HG.

NOTE: Part application LCNs (LSACONHO) are mapped to their respective system/end items by matching on EIAC, LCN Type, LCN, and ALC between Tables HO and XC to extract applicable UOCs and the PCCN. A part application can have multiple UOCs, but it can have only one PCCN.

C.12.16 Table HP, Design Change Information. This Table contains information about the parts application item affected by a design change. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), and Change Authority Number (CANUMBHP). For a given row of information, the following cross-element edits apply to Table HP:

(a) Replaced or Superseding PLISN (RSPLISHP) shall be established in either Table HG or XC matching the PCCN of the HP Table keys (less CANUMBHO). A Replaced or Superseded PLISN Indicator (RSPINDHP) cannot be entered without a Replaced or Superseded PLISN (RSPLISHP).

C-105

DEF STAN 00-60 (PART 0)/4

ANNEX C

(b)Quantity Procured (QTYPROHP) shall be entered if there is an entry in Quantity Transported (QTYSHPHP). The QTYPROHP shall be greater than or equal to the QTYSHPHP.

(c)Principal Features List Code (PFLCODHP), if required, shall either be set to ‘MAJICYP’ or ‘MAJICYF’ (refer to Principal Features List data element definition).

(d)If Interchangeability Code (INTERCHP) is entered, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

C.12.17 Table HQ, Serial Number Effectivity. This Table contains the serial number effectivity ranges which are affected by the design change. Table keys include all columns.

C-106

C.12.18 Table HR, Design Change Usable On Code. This Table references to the UOC affected by a design change. Table keys include all columns. Design change UOC is extracted from Table XC through Table HO for the key of UOC System/EI (LCNSEIHO and ALCSEIHO) and UOC provisioning LCN/ALC (LSACONHO and ALTLCNHO). REFNUMHO, CAGECDHO, LSACONHO and ALTLCNHO shall be identical with REFNUMHA, CAGECDXH, LSACONXB and ALTLCNXB from Table HP migrating CANUMBHP into this Table. EIACODXA and LCNTYPXB shall be identical in Tables XC, HO, and HR.

C.12.19 Table HS, Not Used

C.12.20 Table HT, Not Used

C.12.21 Table HU, Initial Provisioning Project and Variants. This Table contains data used to produce segments IPH and VAS of an AECMA S2000M Catalogue Sequence Number Orientated Initial Provisioning Data (CSNIPD) message. The table key is Initial Provisioning Project Number (IPPNUMHU). For a given row of information, the following cross-element edits apply to Table HU:

(a)IP SUBJECT CAGE 1 CODE (IPCAG1HU) and IP SUBJECT 1 REFERENCE NUMBER (IPREF1HU) migrate from Table HA keys as non-identifying data.

(b)IP SUBJECT CAGE 2 CODE (IPCAG2HU) and IP SUBJECT 2 REFERENCE NUMBER (IPREF2HU) migrate from Table HA keys as non-identifying data.

C-107

DEF STAN 00-60 (PART 0)/4

ANNEX C

(c)IP SUBJECT CAGE 3 CODE (IPCAG3HU) and IP SUBJECT 3 REFERENCE NUMBER (IPREF3HU) migrate from Table HA keys as non-identifying data.

(d)IP SUBJECT CAGE 4 CODE (IPCAG4HU) and IP SUBJECT 4 REFERENCE NUMBER (IPREF4HU) migrate from Table HA keys as non-identifying data.

(e)IP SUBJECT CAGE 5 CODE (IPCAG5HU) and IP SUBJECT 5 REFERENCE NUMBER (IPREF5HU) migrate from Table HA keys as non-identifying data.

(f)IP SUBJECT CAGE 6 CODE (IPCAG6HU) and IP SUBJECT 6 REFERENCE NUMBER (IPREF6HU) migrate from Table HA keys as non-identifying data.

(g)IP SUBJECT CAGE 7 CODE (IPCAG7HU) and IP SUBJECT 7 REFERENCE NUMBER (IPREF7HU) migrate from Table HA keys as non-identifying data.

(h)IP SUBJECT CAGE 8 CODE (IPCAG8HU) and IP SUBJECT 8 REFERENCE NUMBER (IPREF8HU) migrate from Table HA keys as non-identifying data.

C.12.22 Table HV, Initial Provisioning Project Spares Quantities. This Table contains data used to produce segment PIS of an AECMA S2000M Part Number Orientated Initial Provisioning Data (PNOIPD) message. It also provides a list of parts contained in group 2 of a CSNIPD or parts contained in a PNOIPD message. The table keys are Initial Provisioning Project Number (IPPNUMHU) from Table HU, CAGE Code (CAGECDXH) and Reference Number (REFNUMHA) from Table HA, Service Designator Code (EQTSERHV) and User Nation Code (TEIUSRHV).

C-108

C-109

DEF STAN 00-60 (PART 0)/4

ANNEX C

C.13 Transportability Engineering Analysis

Data Tables beginning with ‘J’ in the first position of the Table Code are structured to capture the information pertaining to the transportability modes and to the transported end item. In the event that the end item is sectionalized for transportation, the information shall be completed for each section of the end item. Figure 15 depicts the relational hierarchy of these Tables/entities.

C-110