Хорошев / ИЛП_материал_маг_02.15 / DEF STAN 00-60 / Issue 4 / Part 0 - Annex C - Data dictionary and related technical inf

DEF STAN 00-60 (PART 0)/4

ANNEX C

C.12.1 Table HA, Item Identification. This Table contains parts information that is not dependent of the part application such as item identification, cataloguing, common maintenance information, special management characteristics and units of measure and issue. Table keys consist of CAGE and Reference Number (CAGECDXH and REFNUMHA). For a given row of information, the following cross-element edits apply to Table HA:

(a)Shelf Life Action Code (SLACTNHA) is not allowed without Shelf Life (SHLIFEHA).

(b)National Item Identification Number (NIINSNHA) is not allowed without NATO Supply Classification (FSCNSNHA).

(c)Unit Size Length (ULENGTHA), Width (UWIDTHHA), Height (UHEIGHHA) and Unit Size Unit Of Measure (SUUUOMHA) shall all be blank or all have entries.

(d)UM (UNITMSHA), UI (UNITISHA) and UI Conversion Factor (UICONVHA) shall all be blank or all have entries. If UM (UNITMSHA) equals UI (UNITISHA), UI Conversion Factor (UICONVHA) shall equal ‘00001’. Conversely, if UI and UM are not equal, then UI Conversion Factor cannot equal ‘00001’.

(e)If Special Material Content Code (SPMACCHA) is ‘E’, then the Precious Metals Indicator Code (PMICODHA) cannot be ‘A’.

(f)Unit Weight (UWEIGHHA) and Unit Weight Unit Of Measure (WUUUOMHA) shall either both be blank or both have entries.

(g)Draught (DRAGHTHA) and Draught Unit Of Measure (DRGTUMHA) shall either both be blank, or both have entries.

(h)If Hazardous Code (HAZCODHA) is set to ‘N’, Hazardous Material (HAZMATHA) shall be blank.

(i)Unit of Issue Conversion Factor (UICONVHA) first digit shall be 0 (zero).

(j)Hazardous Materials Storage Cost (HMSCOSHA), Hazardous Waste Disposal Cost (HWDCOSHA) or Hazardous Waste Storage Cost (HWSCOSHA) and their respective Currency Code shall both be blank, or both have entries.

(k)If Physical Security Pilferage Code (PHYSECHA), Production Lead Time (PRDLDTHA), Shelf Life (SHLIFEHA), Shelf Life Action Code (SLACTNHA), Unit Of Issue (UNITISHA), Unit Size (ULENGTHA, UWIDTHHA, UHEIGHHA), Unit Weight (UWEIGHHA), Item Type (ITMTYPHA), Electrostatic Sensitive Device (ELESEDHA), Hazardous Material (HAZMATHA), Spare Parts Classification (SPCLASHA), NSN Nato Supply Classification (FSCNSNHA), NSN National Item Identification Number (NIINSNHA) or Fitment Code (FITCODHA) have entries, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

C-91

DEF STAN 00-60 (PART 0)/4

ANNEX C

NOTE: If Electrostatic Sensitive Device (ELESEDHA) is set to ‘1’, Item Category Code in Tables HG and EA (ITMCATHG and SEICCDEA) should take account of this although they are not mandated to be set to ‘K’.

C-92

C.12.2 Table HB, Additional Reference Number. This Table contains Additional Reference Numbers (ARN) that may be used to identify the item of supply. Table keys include item CAGE (CAGECDHB) and Reference Number (REFNUMHB) from Table HA, additional CAGE (ADCAGEHB) from Table XH, and ARN (ADDREFHB). In a given row, when the ARN and CAGE match the primary Reference Number and CAGE, there shall be an entry in Reference Number Category Code (RNCC) and this entry shall be different from the RNCC entry in Table HA.

C-93

DEF STAN 00-60 (PART 0)/4

ANNEX C

C.12.3 Table HC, Contractor Technical Information Code (CTIC) CAGE. This Table has been deleted for DEF STAN 00-60 as CTIC is not used in UK.

C.12.4 Table HD, Item Unit of Issue Price. This Table contains UI prices and associated information about the UI price. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA) and UI Price (UIPRICHD). For a given row of information, the following cross-element edits apply to Table HD:

(a)UI (UNITISHA) shall be established in Table HA for the Reference Number and CAGE combination prior to establishing a value in this Table.

(b)For identical Reference Number and CAGE keys, only one row of information can be established with a ‘Y’ Provisioning UI Price Code (PROUIPHD).

(c)UI Price Lot Quantity From (LOTQFMHD) shall be less than or equal to UI Price Lot Quantity To (LOTQTOHD) in any row.

(d)PBD 2 UI Price Lot Quantity From (PBD2FMHD) shall be less than or equal to PBD 2 UI Price Lot Quantity To (PBD2TOHD) in any row.

(e)PBD 3 UI Price Lot Quantity From (PBD3FMHD) shall be less than or equal to PBD 3 UI Price Lot Quantity To (PBD3TOHD) in any row.

(f)If UI Price Lot Quantity From (LOTQFMHD) or UI Price Lot Quantity To (LOTQTOHD) are entered then PBD 2 UI Price Lot Quantity From (PBD2FMHD), PBD 2 UI Price Lot Quantity To (PBD2TOHD), PBD 3 UI Price Lot Quantity From (PBD3FMHD) and PBD 3 UI Price Lot Quantity To (PBD3TOHD) shall all be blank.

(g)If PBD 2 UI Price Lot Quantity From (PBD2FMHD) or PBD 2 UI Price Lot Quantity To (PBD2TOHD) are entered then UI Price Lot Quantity From (LOTQFMHD), UI Price Lot Quantity To (LOTQTOHD), PBD 3 UI Price Lot Quantity From (PBD3FMHD) and PBD 3 UI Price Lot Quantity To (PBD3TOHD) shall all be blank.

(h)If PBD 3 UI Price Lot Quantity From (PBD3FMHD) or PBD 3 UI Price Lot Quantity To (PBD3TOHD) are entered then UI Price Lot Quantity From (LOTQFMHD), UI Price Lot Quantity To (LOTQTOHD), PBD 2 UI Price Lot Quantity From (PBD2FMHD) and PBD 2 UI Price Lot Quantity To (PBD2TOHD) shall all be blank.

(i)For identical CAGE and Reference Number combinations in Table HG, if Type Of Price (TYPEOPHD) is entered, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

C-94

C.12.5 Table HE, Item Unit of Measure Price. This Table contains UM prices and associated information about the UM price. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA) and UM Price (UMPRICHE). For a given row of information, the following cross-element edits apply to Table HE:

(a)UM (UNITMSHA) shall be established in Table HA for the Reference Number and CAGE combination prior to establishing a value in this Table.

(b)For identical Reference Number and CAGE keys, only one row of information can be established with a ‘Y’ Provisioning UM Price Code (PROUMPHD).

(c)Lot Quantity From (LOTQFMHE) shall be less than or equal to Lot Quantity To (LOTQTOHE) in any row.

C.12.6 Table HF, Item Packaging Requirement. This Table contains packaging data, as specified by DEF STAN 81-41 and DEF STAN 81-131. Table keys are: CAGE (CAGECDXH), Reference Number (REFNUMHA) and Degree of Protection Code (DEGPROHF). For a given row of information, the following cross-element edits apply to Table HF:

C-95

DEF STAN 00-60 (PART 0)/4

ANNEX C

(a)Unit Pack Length (LENUPKHF), Width (WIDUPKHF), Depth (DEPUPKHF) and Unit Pack Size Unit Of Measure (SPUUOMHF) shall either all be blank or all have entries.

(b)Unit Pack entries shall be greater than or equal to Unit Size entries in Table HA (LENUPKHF greater than or equal to ULENGTHA; WIDUPKHF greater than or equal to UWIDTHHA; and, DEPUPKHF greater than or equal to UHEIGHHA).

(c)Unit Pack Weight (UNPKWTHF) shall be greater than or equal to Unit Weight (UWEIGHHA) in Table HA.

(d)Unit Pack Weight (UNPKWTHF) and Unit Pack Weight Unit Of Measure (WPUUOMHF) shall either both be blank or both have entries.

(e)Unit Pack Size Unit Of Measure (SPUUOMHF) and Unit Size Unit Of Measure (SUUUOMHA) in Table HA shall be the same.

(f)Unit Pack Weight Unit Of Measure (WPUUOMHF) and Unit Weight Unit Of Measure (WUUUOMHA) in Table HA shall be the same.

(g)Category 1 Container CAGE and Reference Number (CCMCAGHF and CCMREFHF) migrate from Table HA as non-identifying data elements.

(h)If Service Packaging Instruction Sheet Number (SPISNOHF) is blank then Service Packaging Instruction Sheet Revision Status (SPIREVHF) and SPIS Date (SPSDATHF) shall not have entries.

NOTE: If Standard Package Quantity (TEISPQHF), Unit Pack Weight (UNPKWTHF), Unit Pack Size (LENUPKHF, WIDUPKHF, DEPUPKHF), Special Storage (SPLSTRHF) or Container NSN (CONNSNHF) have entries, Reason For Selection (DED 668) from Table HK should not be ‘0’.

C-96

C.12.7 Table HG, Part Application Provisioning. This Table contains parts related information to the part in a specific hardware application. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB) and LCN Type (LCNTYPXB). For a given row of information, the following cross-element edits apply to Table HG:

(a)LCN Type shall always be ‘P’ (Physical).

(b)Maintenance Action Code (MAIACTHG) is not allowed without Maximum Allowable Operating Time (MAOTIMHG).

(c)Maintenance Task Distribution subfields (OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG, DMTDDDHG, CBDMTDHG, and CADMTDHG) shall always total 100 percent.

(d)Replacement Task Distribution subfields (ORTDOOHG, FRTDFFHG, HRTDHHHG, LRTDLLHG, and DRTDDDHG) shall always total 100 percent.

(e)PCCN (PCCNUMXC) and Provisioning List Item Sequence Number (PLISN) (PLISNOHG) combinations shall be unique across all rows of information (PLISNs are mapped to respective PCCNs in Table XC through Table HO).

(f)Same as PLISN (SAPLISHG) shall be contained in this Table as a PLISN (PLISNOHG) having an identical PCCN. The same as PLISN shall be the lowest (EBCDIC value) PLISN in the Table for the same Reference Number, CAGE and PCCN combinations (without an associated ‘D’ TOCC).

(g)Repair Cycle Time (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, DRCTDDHG and CONRCTHG) for each Operations/Maintenance (O/M) Level (identified by the first position of the role name) shall be either blank or greater for each higher O/M level.

(h)When numeric, the Quantity Per End Item (QTYPEIHG) shall be greater than or equal to the Quantity Per Assembly (QTYASYHG).

C-97

DEF STAN 00-60 (PART 0)/4

ANNEX C

(i) Maintenance Task Distribution and Replacement Task Distribution.

(1)OMTDOOHG shall be less than or equal to ORTDOOHG.

(2)OMTDOOHG and FMTDFFHG shall be less than or equal to ORTDOOHG and FRTDFFHG.

(3)OMTDOOHG, FMTDFFHG, and HMTDHHHG shall be less than or equal to ORTDOOHG, FRTDFFHG, and HRTDHHHG.

(4)OMTDOOHG, FMTDFFHG, HMTDHHHG, and LMTDLLHG shall be less than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, and LRTDLLHG.

(5)OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG, and DMTDDDHG shall be less than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, LRTDLLHG, and DRTDDDHG.

(j)Maintenance Task Distribution and Repair Cycle Time (RCT). When OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG and DMTDDDHG have an entry, then the corresponding RCT O/M subfield (identified by the first position of the role name) shall also have an entry (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, and DRCTDDHG).

(k)An Allowance Item Quantity (ALIQTYHG) cannot be entered without an Allowance Item Code (ALLOWCHG).

(l)When the Source, Maintenance, and Recoverability (SMR) (SMRCODHG) source code is ‘PC’, the Shelf Life (SHLIFEHA) in Table HA cannot be ‘O’.

(m)If the SMR (SMRCODHG) Source Code is ‘PB’, then the Essentiality Code (ESSCODHG) cannot be ‘3’.

(n)If LRU (LRUNITHG) is ‘Y’, then Essentiality Code (ESSCODHG) cannot be ‘3’.

(o)If the Special Maintenance Item Code (SMAINCHA) from Table HA is ‘B’, and if RCT has entries, then there shall be an entry in the contractor RCT (CONRCTHG). If CONRCTHG is entered, then SMAINCHA can only be ‘B’.

(p)Maintenance Replacement Rate (MRR) I shall be calculated based on the Task Frequency (Table CA) and the Quantity per Task (Table CI). A change in any of these variables shall result in an update of the MRRI.

(q)Subject ID CAGE Code (SIDCAGHG), Subject ID Reference Number (SIDREFHG), Subject ID NSN (SIDNSNHG) shall all be blank or all have entries.

(r)If Essentiality Code (ESSCODHG) and Total Life (TOTLIFHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’.

C-98

DEF STAN 00-60 (PART 0)/4

ANNEX C

(s)If the 4th character of Source, Maintenance And Recoverability Code (SMRCODHG) is ‘D’ and Maintenance Task Distribution (OMTDOOHG, FMTDFFHG, HMTDHHHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’.

(t)If Maintenance Task Distribution (CBDMTDHG, CADMTDHG) and Repair Cycle Time (RCT) (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, DRCTDDHG, CONRCTHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’ and Spare Parts Classification (DED 684) from Table HA shall be ‘2’ or ‘6’.

NOTE: When entering Attaching Storage Or Shipping Part (ATSOSPHG), attention should be given to Item Category Code (ITMCATHG) so that the two data elements are not contradictory.

C-99

C-100