DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

End Item Acronym

End Item Acronym Code

XA

LCN Indentured Item

LCN

ALC

LCN - Type

XB

Technical Manual Code

and Number Index

TM Code

XI

Figure 6 X Table Relationships

C-10

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.4.1 Table XA, End Item Acronym Code. This Table contains the EIAC (EIACODXA) used to define the LSAR system documented in the relational database. Also included in this Table are LORA modelling parameters provided by the Project. For a given row of information, the following cross-element edits apply to Table XA :

(a)Demilitarization Cost (DEMILCXA) and Demilitarization Cost Currency Code (DMCCCDXA) shall either both be blank, or both have entries.

(b)Initial Bin Cost (INTBINXA) and Initial Bin Cost Currency Code (IBCCCDXA) shall either both be blank, or both have entries.

(c)Initial Cataloguing Cost (INCATCXA) and Initial Cataloguing Cost Currency Code (ICCCCDXA) shall either both be blank, or both have entries.

(d)Recurring Bin Cost (RCBINCXA) and Recurring Bin Cost Currency Code (RBCCCDXA) shall either both be blank, or both have entries.

(e)Recurring Cataloguing Cost (RCCATCXA) and Recurring Cataloguing Cost Currency Code (RCCCCDXA) shall either both be blank, or both have entries.

(f)Transportation Cost (TRNCSTXA) and Transportation Cost Currency Code (TRNCCCXA) shall either both be blank, or both have entries.

C-11

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.4.2 Table XB, LSA Control Number Indentured Item. This Table contains all LCNs and information about the indentured location of the LCN in the hardware/functional configuration of the system/equipment. Table keys include: EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), and LCN Type (LCNTYPXB). For a given row of information, the following cross-element edits apply to Table XB :

(a) The LCN (LSACONXB) shall either match an indenture level length specified by the LCN Structure (LCNSTRXA) in Table XA, or be a greater length than the total of all LCN Structure indenture levels, eg if the LCN Structure is ‘12233’, an LCN shall be either 1, 3, 5, 8, 11, or greater than 11 positions. If the LCN is greater than 11 positions, the LCN Indenture Code becomes mandatory.

NOTE: When System/EI Identifier (SYSIDNXB) is ‘E’, then EIAC (EIACODXA) combined with UOC (UOCSEIXC) equate to AECMA 1000D element ‘Model Identification’. When System/EI Identifier (SYSIDNXB) is ‘S’, then UOC (UOCSEIXC) equates to AECMA 1000D element ‘System Difference Code’.

C.4.3 Table XC, System/End Item. This table contains only those LCNs representing a system/End Item (EI) or ‘A’ indenture coded item. A system/EI is an item capable of independent operation for its intended use, e.g., rifle, radio receiver, or is a class or group of equipment that is managed and provisioned under a separate Provisioning Contract Control Number (PCCN). Table keys include: EIAC (EIACODXA); LCN (LSACONXB); ALC (ALTLCNXB); and, LCN Type (LCNTYPXB). For a given row of information, the following cross-element edits apply to Table XC :

(a) The System/EI Identifier (SYSIDNXB) of ‘S’ or ‘E’ identifies LCNs as representing System/EIs from table XB for entry into this table.

C-12

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(b)For identical PCCNs (PCCNUMXC), the UOCs (UOCSEIXC) must be different.

(c)All alternate assemblies of the same LCN must have the same PCCN.

C.4.4 Table XD, System/End Item Serial Number. This table is only used when parts configuration control is managed by serial numbers (S/N) of a System/EI. It contains Serial Numbers applicable to a System/End Item, and if required, Serial Number UOC assignments, e.g., for model V10, identified in table XC, applicable serial numbers may be 110 through 118, 121 and 125-130, while for model V10A, also identified in table XC, the applicable serial numbers may be 119, 122-124, and 131-150. For these serial number(s) specific serial number UOCs may be assigned as follows:

For a given row of information, the following cross-element edits apply to Table XD :

(a)S/N From (FRSNUMXD) shall be less than or equal to S/N To (TOSNUMXD).

(b)S/N UOCs shall be different for all EIAC, LCN, ALC and LCN Type combinations within the same PCCN (pulled from Table XC for subject keys).

C-13

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.4.5 Table XE, LCN to Serial Number Usable On Code. This table contains LCN and system/EI S/N LCNs in order to determine the associated S/N and S/N UOCs for the LCN. Table keys include all columns. For a given row of information, the following cross-element edits apply to Table XE :

(a)Table keys LSACONXE, ALTLCNXE, and LCNTYPXE migrate from table XB. Table keys LCNSEIXE, ALCSEIXE, and LTYSEIXE migrate from table XD. EIACODXA is identical for keys from tables XB and XD for a given row of data.

(b)Rows of information from this Table with LCNTYPXE and LTYSEIXE of ‘P’ shall match entries in Table HN, when Table HN is established.

(c)Table keys S/N Serial Number From (FRSNUMXE) and S/N Serial Number To (TOSNUMXE) migrate from table XD and are given role names.

C.4.6 Table XF, LCN to System/End Item Usable On Code. This table contains LCNs and System/EI LCNs in order to determine the associated UOC for the LCN. This table and table HO(for provisioning) are critical to qualify an LCN for report requests when a specific UOC is required for report selection. Table keys include all columns. For a given row of information, the following cross-element edits apply to Table XF :

(a) Table keys LSACONXF, ALTLCNXF, and LCNTYPXF originate in table XB. Table keys LCNSEIXF, ALCSEIXF, and LTYSEIXF migrate from table XC. EIACODXA is identical for keys from tables XB and XC for a given row of data.

Rows of information from this Table with LCNTYPXF and LTYSEIXF of ‘P’ shall match entries in Table HO, when Table HO is established.

C-14

C.4.7 Table XG, Functional/Physical LCN Mapping. This table contains a cross-listing of functional/physical LCNs. All data, except EIACODXA, originate in table XB. EIACODXA is identical for all keys across a given row of data. Physical LCN Type must always be ‘P’; Functional LCN Type must always be ‘F’. When a functional and physical LCN are mapped through this table, all data contained against the functional LCN shall migrate to the physical LCN (physical LCN data shall take precedence if data duplication has occurred). After the data is migrated, data additions and updates for this item shall only occur against the physical LCN.

C.4.8 Table XH, Commercial And Government Entity (CAGE) Code. This Table contains all Commercial And Government Entity (CAGE) Codes, and CAGE addresses. A CAGE Street (CASTREXH), City (CACITYXH), State (CASTATXH), Nation (CANATNXH), or Postal Zone (CAPOZOXH) cannot be included without a CAGE Name (CANAMEXH).

C-15

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.5 Operations and Maintenance Requirements

Data Tables beginning with ‘A’ in the first position of the Table Code are structured to consolidate information related to the anticipated operation of the system, environment in which the system will be operated and maintained, and maintenance requirements of the system which shall be met. This information is prepared for the system and for each subsystem for which maintenance requirements are to be imposed. Figure 7 depicts the relational hierarchy of these Tables/entities.

C-16