Добавил:

Upload Опубликованный материал нарушает ваши авторские права? Сообщите нам.

Вуз:

Пермский национальный исследовательский политехнический университет

Предмет:

[НЕСОРТИРОВАННОЕ]

Файл:

Хорошев / ИЛП_материал_маг_02.15 / DEF STAN 00-60 / 00000300.pdf

Скачиваний:

Добавлен:

29.03.2015

Размер:

4.37 Mб

Скачать

☆

<<< < Предыдущая 5 6 7 8 9 10 11 12 13 14 15 1617 / 4717 18 19 20 21 22 23 24 25 26 27 28 29 > Следующая >>>

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

Commercial and Govt.

Entity Code

CAGE

Item

Reference Number

LCN Indentured Item

EIAC

LCN

ALC

LCN - Type XB

Part Application

Basis of Issue

Provisioning

System/End Item

BOI Control

Initial Provisioning

Item Packaging

Projects and Variants

Requirement

Additional Reference

Initial Provisioning

Degree of Protection

Number

Project Number

Additional Reference

Unit of Measure Price

Number

Crisis Resupply from

UM Price

Industry Procedure (CRIP)

CRIP Item Contract Number

Unit of Issue Price

UI Price

System/End Item

Serial Number

From Serial Number

Technical Manual Code

To Serial Number

and Number Index

TM Code

Initial Provisioning Project

CRIP Equipment

Spares Quantities

Production Remarks

Service Designator Code

Equipment Production

User Nation Code

Remarks

Text Sequencing Code

Provisioning Serial

Parts Manual Description

Design Change

Number

Figure Number

Information

Usable On Code

Item Number

Change Authority Number

Provisioning Reference

Designation

Provisioning System/EI

Reference Designation

Parts Manual Provisioning

Usable On Code

Nomenclature

Provisioning

Provisioning Remark

Nomenclature Text

Provisioning Narrative Code

Sequencing Code

Provisioning Text

Sequencing Code

Overhaul/Kit Next

Higher Assembly PLISN

Design Change

NHA PLISN

Serial Number Effectivity

Usable On Code

Serial Number Effectivity

From

Serial Number Effectivity To

Figure 14 H Table Relationships

C-86

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.12.1 Table HA, Item Identification. This Table contains parts information that is not dependent of the part application such as item identification, cataloguing, common maintenance information, special management characteristics and units of measure and issue. Table keys consist of CAGE and Reference Number (CAGECDXH and REFNUMHA). For a given row of information, the following cross-element edits apply to Table HA :

(a)Shelf Life Action Code (SLACTNHA) is not allowed without Shelf Life (SHLIFEHA).

(b)National Item Identification Number (NIINSNHA) is not allowed without NATO Supply Classification (FSCNSNHA).

(c)Unit Size Length (ULENGTHA), Width (UWIDTHHA), Height (UHEIGHHA) and Unit Size Unit Of Measure (SUUUOMHA) shall all be blank or all have entries.

(d)UM (UNITMSHA), UI (UNITISHA) and UI Conversion Factor (UICONVHA) shall all be blank or all have entries. If UM (UNITMSHA) equals UI (UNITISHA), UI Conversion Factor (UICONVHA) shall equal ‘00001’. Conversely, if UI and UM are not equal, then UI Conversion Factor cannot equal ‘00001’.

(e)If Special Material Content Code (SPMACCHA) is ‘E’, then the Precious Metals Indicator Code (PMICODHA) cannot be ‘A’.

(f)Unit Weight (UWEIGHHA) and Unit Weight Unit Of Measure (WUUUOMHA) shall either both be blank or both have entries.

(g)Draught (DRAGHTHA) and Draught Unit Of Measure (DRGTUMHA) shall either both be blank, or both have entries.

(h)If Hazardous Code (HAZCODHA) is set to ‘N’, Hazardous Material (HAZMATHA) shall be blank.

(i)Unit of Issue Conversion Factor (UICONVHA) first digit shall be 0 (zero).

(j)Hazardous Materials Storage Cost (HMSCOSHA), Hazardous Waste Disposal Cost (HWDCOSHA) or Hazardous Waste Storage Cost (HWSCOSHA) and their respective Currency Code shall both be blank, or both have entries.

(k)If Physical Security Pilferage Code (PHYSECHA), Production Lead Time (PRDLDTHA), Shelf Life (SHLIFEHA), Shelf Life Action Code (SLACTNHA), Unit Of Issue (UNITISHA), Unit Size (ULENGTHA, UWIDTHHA, UHEIGHHA), Unit Weight (UWEIGHHA), Category Of Material (CATOFMHA), Electrostatic Sensitive Device (ELESEDHA), Hazardous Material (HAZMATHA), Spare Parts Classification (SPCLASHA), NSN Nato Supply Classification (FSCNSNHA), NSN National Item Identification Number (NIINSNHA) or Fitment Code (FITCODHA) have entries, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

C-87

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

NOTE: If Electrostatic Sensitive Device (ELESEDHA) is set to ‘1’, Item Category Code in Tables HG and EA (ITMCATHG and SEICCDEA) should take account of this although they are not mandated to be set to ‘K’.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	K
ITNAMEHA	ITEM NAME	19	X	L	-	182
INAMECHA	ITEM NAME CODE	5	X	F	-	183
REFNCCHA	REFERENCE NUMBER CATEGORY CODE	1	X	F	-	338
REFNVCHA	REFERENCE NUMBER VARIATION CODE	1	N	F	-	339
FSCNSNHA	NSN NATO SUPPLY CLASSIFICATION	4	N	F	-	253
NIINSNHA	NSN NATIONAL ITEM IDENTIFICATION NUMBER	9	N	F	-	253
UICONVHA	UNIT OF ISSUE CONVERSION FACTOR (UI CONVERSION	5	N	F	-	489
	FACTOR)
SHLIFEHA	SHELF LIFE (SL)	1	X	F	-	377
SLACTNHA	SHELF LIFE ACTION CODE (SLAC)	2	X	F	-	378
PRDLDTHA	PRODUCTION LEAD TIME	2	N	R	-	299
SPMACCHA	SPECIAL MATERIAL CONTENTS CODE (SMCC)	1	X	F	-	395
SMAINCHA	SPECIAL MAINTENANCE ITEM CODE (SMIC)	1	A	F	-	392
CRITCDHA	CRITICALITY CODE	1	A	F	-	066
PMICODHA	PRECIOUS METAL INDICATOR CODE	1	X	F	-	293
SAIPCDHA	SPARES ACQUISITION INTEGRATED WITH PRODUCTION	1	A	F	-	391
	(SAIP)
AAPLCCHA	GOVERNMENT FURNISHED PROVISIONING LIST	1	A	F	-	308
	CATEGORY CODE (PLCC)
BBPLCCHA	INTERIM SUPPORT ITEMS PLCC	1	A	F	-	308
CCPLCCHA	LONG LEAD TIME ITEM PLCC	1	A	F	-	308
DDPLCCHA	TOOLS AND TEST EQUIPMENT PLCC	1	A	F	-	308
EEPLCCHA	COMMON AND BULK ITEM PLCC	1	A	F	-	308
FFPLCCHA	REPAIRABLE ITEMS PLCC	1	A	F	-	308
GGPLCCHA	INTERIM RELEASED ITEM PLCC	1	A	F	-	308
HHPLCCHA	INSTALLATION AND CHECKOUT ITEM PLCC	1	A	F	-	308
JJPLCCHA	AUTHORIZATION STOCK LIST ITEM PLCC	1	A	F	-	308
KKPLCCHA	RECOMMENDED BUY LIST ITEM PLCC	1	A	F	-	308
LLPLCCHA	PRESCRIBED LOAD LIST ITEM PLCC	1	A	F	-	308
MMPLCCHA	SYSTEM SUPPORT PACKAGE COMPONENT LIST PLCC	1	A	F	-	308
PHYSECHA	PHYSICAL SECURITY/PILFERAGE CODE	1	X	F	-	291
DEMILIHA	DEMILITARIZATION CODE	1	A	F	-	076
ACQMETHA	ACQUISITION METHOD CODE	1	N	F	-	003
HMSCOSHA	HAZARDOUS MATERIALS STORAGE COST	8	N	R	-	156
HMSCCCHA	HAZARDOUS MATERIALS STORAGE COST CURRENCY	3	X	-	-	629
	CODE
HWDCOSHA	HAZARDOUS WASTE DISPOSAL COST	8	N	R	-	157
HWDCCCHA	HAZARDOUS WASTE DISPOSAL COST CURRENCY CODE	3	X	-	-	629
HWSCOSHA	HAZARDOUS WASTE STORAGE COST	8	N	R	-	158
HWSCCCHA	HAZARDOUS WASTE STORAGE COST CURRENCY CODE	3	X	-	-	629
UWEIGHHA	UNIT WEIGHT	5	X	-	-	497
WUUUOMHA	UNIT WEIGHT UOM	2	A	F	-	491
ULENGTHA	UNIT SIZE LENGTH	4	N	R	1	496
UWIDTHHA	UNIT SIZE WIDTH	4	N	R	1	496
UHEIGHHA	UNIT SIZE HEIGHT	4	N	R	1	496
SUUUOMHA	UNIT SIZE UOM	2	A	F	-	491
HAZCODHA	HAZARDOUS CODE	1	A	F	-	154

C-88

	DEF STAN 00-60 (PART 0)/3
	ANNEX C (CONTINUED)
UNITMSHA	UNIT OF MEASURE	2	A	F	-	491
UNITISHA	UNIT OF ISSUE (UI)	2	A	F	-	488
CRITITHA	CRITICAL ITEM CODE	13	X	L	-	065
MATERLHA	MATERIAL	240	X	L	-	218
CATOFMHA	CATEGORY OF MATERIAL (AECMA 2000M TEI COM)	1	N	-	-	623
LDOSMOHA	SUPPLY MANAGEMENT ORGANIZATION LOGISTIC	15	X	L	-	198
	DECISION OFFICE
CLAOFSHA	CLASS OF STORE	1	A	F	-	625
DOMMACHA	DOMESTIC MANAGEMENT CODE (AECMA 2000M TEI	6	X	L	-	632
	DMC)
ELESEDHA	ELECTROSTATIC SENSITIVE DEVICE (AECMA 2000M TEI	1	N	-	-	634
	ESD)
HAZMATHA	HAZARDOUS MATERIAL (AECMA 2000M TEI HAZ)	4	X	-	-	641
LIFCATHA	LIFING CATEGORY	9	X	L	-	648
NEITEMHA	NEW/EXISTING ITEM	1	A	-	-	658
POOLITHA	POOL ITEM CANDIDATE (AECMA 2000M TEI PIC)	1	N	-	-	662
REFNJCHA	REFERENCE NUMBER JUSTIFICATION CODE (AECMA	1	N	-	-	672
	2000M TEI RNJ)
SPCLASHA	SPARE PARTS CLASSIFICATION (AECMA 2000M TEI SPC)	1	N	-	-	684
UPKDIRHA	UPKEEP BY EXCHANGE/DIRECT EXCHANGE	1	A	F	-	705
ENGRECHA	ENGINEERING RECORD CARD	240	X	L	-	637
PROCCDHA	PROCUREMENT CODE (AECMA 2000M TEI PCD)	2	X	L	-	666
DRAGHTHA	DRAUGHT	4	N	R	-	633
DRGTUMHA	DRAUGHT UNIT OF MEASURE	2	A	F	-	491
SPEDRWHA	SPECIFICATION/DRAWING NUMBER	36	X	-	-	687
DSLOCMHA	SOFTWARE DSLOC MEASURED	8	N	R	-	807
DSLOCPHA	SOFTWARE DSLOC PREDICTED	8	N	R	-	807
SWRIPRHA	SOFTWARE IPR HOLDER	25	X	L	-	810
PSIZEMHA	SOFTWARE PROGRAM SIZE MEASURED	10	D	-	-	812
PSIZEPHA	SOFTWARE PROGRAM SIZE PREDICTED	10	D	-	-	812
SRFREQHA	SOFTWARE RELEASE FREQUENCY	2	N	R	-	813
MEMREQHA	SOFTWARE TOTAL MEMORY REQUIRED	10	D	-	-	815
SWVERNHA	SOFTWARE VERSION NUMBER	4	X	L	-	816
FITCODHA	FITMENT CODE (AECMA 2000M TEI FTC)	1	X	-	-	640
CALMKRHA	CALIBRATION MARKER (AECMA 2000M TEI CMK)	1	N	-	-	621
PRVDOPHA	PROVISIONING DEGREE OF PROTECTION CODE	1	A	F	-	074

C.12.2 Table HB, Additional Reference Number. This Table contains Additional Reference Numbers (ARN) that may be used to identify the item of supply. Table keys include item CAGE (CAGECDHB) and Reference Number (REFNUMHB) from Table HA, additional CAGE (ADCAGEHB) from Table XH, and ARN (ADDREFHB). In a given row, when the ARN and CAGE match the primary Reference Number and CAGE, there shall be an entry in Reference Number Category Code (RNCC) and this entry shall be different from the RNCC entry in Table HA.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT			DED	KEY
CAGECDHB	ARN ITEM CAGE CODE	5	X F	-	046	F
REFNUMHB	ARN ITEM REFERENCE NUMBER	32	X L	-	337	F
ADCAGEHB	ARN CAGE CODE	5	X F	-	046	F
ADDREFHB	ADDITIONAL REFERENCE NUMBER	32	X L	-	006	K
ADRNCCHB	ARN REFERENCE NUMBER CATEGORY CODE	1	X F	-	338
ADRNVCHB	ARN REFERENCE NUMBER VARIATION CODE	1	N F	-	339

C-89

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.12.3 Table HC, Contractor Technical Information Code (CTIC) CAGE. This Table has been deleted for DEF STAN 00-60 as CTIC is not used in UK.

C.12.4 Table HD, Item Unit of Issue Price. This Table contains UI prices and associated information about the UI price. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA) and UI Price (UIPRICHD). For a given row of information, the following cross-element edits apply to Table HD :

(a)UI (UNITISHA) shall be established in Table HA for the Reference Number and CAGE combination prior to establishing a value in this Table.

(b)For identical Reference Number and CAGE keys, only one row of information can be established with a ‘Y’ Provisioning UI Price Code (PROUIPHD).

(c)UI Price Lot Quantity From (LOTQFMHD) shall be less than or equal to UI Price Lot Quantity To (LOTQTOHD) in any row.

(d)PBD 2 UI Price Lot Quantity From (PBD2FMHD) shall be less than or equal to PBD 2 UI Price Lot Quantity To (PBD2TOHD) in any row.

(e)PBD 3 UI Price Lot Quantity From (PBD3FMHD) shall be less than or equal to PBD 3 UI Price Lot Quantity To (PBD3TOHD) in any row.

(f)If UI Price Lot Quantity From (LOTQFMHD) or UI Price Lot Quantity To (LOTQTOHD) are entered then PBD 2 UI Price Lot Quantity From (PBD2FMHD), PBD 2 UI Price Lot Quantity To (PBD2TOHD), PBD 3 UI Price Lot Quantity From (PBD3FMHD) and PBD 3 UI Price Lot Quantity To (PBD3TOHD) shall all be blank.

(g)If PBD 2 UI Price Lot Quantity From (PBD2FMHD) or PBD 2 UI Price Lot Quantity To (PBD2TOHD) are entered then UI Price Lot Quantity From (LOTQFMHD), UI Price Lot Quantity To (LOTQTOHD), PBD 3 UI Price Lot Quantity From (PBD3FMHD) and PBD 3 UI Price Lot Quantity To (PBD3TOHD) shall all be blank.

(h)If PBD 3 UI Price Lot Quantity From (PBD3FMHD) or PBD 3 UI Price Lot Quantity To (PBD3TOHD) are entered then UI Price Lot Quantity From (LOTQFMHD), UI Price Lot Quantity To (LOTQTOHD), PBD 2 UI Price Lot Quantity From (PBD2FMHD) and PBD 2 UI Price Lot Quantity To (PBD2TOHD) shall all be blank.

(i)For identical CAGE and Reference Number combinations in Table HG, if Type Of Price (TYPEOPHD) is entered, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
UIPRICHD	UNIT OF ISSUE PRICE (UI PRICE)	10	N	R	2	490	K
LOTQFMHD	UI PRICE LOT QUANTITY FROM	6	N	R	-	205

C-90

	DEF STAN 00-60 (PART 0)/3
	ANNEX C (CONTINUED)
PBD2FMHD	PBD 2 UI PRICE LOT QUANTITY FROM	6	N	R	-	205
PBD3FMHD	PBD 3 UI PRICE LOT QUANTITY FROM	6	N	R	-	205
LOTQTOHD	UI PRICE LOT QUANTITY TO	6	N	R	-	205
PBD2TOHD	PBD 2 UI PRICE LOT QUANTITY TO	6	N	R	-	205
PBD3TOHD	PBD 3 UI PRICE LOT QUANTITY TO	6	N	R	-	205
CURPRCHD	UI PRICE CPC	1	A	F	-	051
PROUIPHD	UI PRICE PROVISIONING	1	A	F	-	314
FISCYRHD	UI PRICE FISCAL YEAR	4	N	F	-	145
CURCODHD	UNIT OF ISSUE PRICE CURRENCY CODE	3	X	-	-	629	M
TYPEOPHD	TYPE OF PRICE (AECMA 2000M TEI TOP)	2	X	-	-	704
TEIMSQHD	MINIMUM SALES QUANTITY (AECMA 2000M TEI MSQ)	5	N	R	-	653

C.12.5 Table HE, Item Unit of Measure Price. This Table contains UM prices and associated information about the UM price. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA) and UM Price (UMPRICHE). For a given row of information, the following cross-element edits apply to Table HE :

(a)UM (UNITMSHA) shall be established in Table HA for the Reference Number and CAGE combination prior to establishing a value in this Table.

(b)For identical Reference Number and CAGE keys, only one row of information can be established with a ‘Y’ Provisioning UM Price Code (PROUMPHD).

(c)Lot Quantity From (LOTQFMHE) shall be less than or equal to Lot Quantity To (LOTQTOHE) in any row.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
UMPRICHE	UNIT OF MEASURE PRICE	10	N	R	2	492	K
UMPCCDHE	UNIT OF MEASURE PRICE CURRENCY CODE	3	X	-	-	629	M
LOTQFMHE	UM PRICE LOT QUANTITY FROM	6	N	R	-	205
LOTQTOHE	UM PRICE LOT QUANTITY TO	6	N	R	-	205
CURPRCHE	UM PRICE CPC	1	A	F	-	051
PROUMPHE	UM PRICE PROVISIONING	1	A	F	-	314
FISCYRHE	UM PRICE FISCAL YEAR	4	N	F	-	145

C.12.6 Table HF, Item Packaging Requirement. This Table contains packaging data, as specified by DEF STAN 81-41 and DEF STAN 81-131. Table keys are: CAGE (CAGECDXH), Reference Number (REFNUMHA) and Degree of Protection Code (DEGPROHF). For a given row of information, the following cross-element edits apply to Table HF :

(a)Unit Pack Length (LENUPKHF), Width (WIDUPKHF), Depth (DEPUPKHF) and Unit Pack Size Unit Of Measure (SPUUOMHF) shall either all be blank or all have entries.

(b)Unit Pack entries shall be greater than or equal to Unit Size entries in Table HA (LENUPKHF greater than or equal to ULENGTHA; WIDUPKHF greater than or equal to UWIDTHHA; and, DEPUPKHF greater than or equal to UHEIGHHA).

C-91

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(c)Unit Pack Weight (UNPKWTHF) shall be greater than or equal to Unit Weight (UWEIGHHA) in Table HA.

(d)Unit Pack Weight (UNPKWTHF) and Unit Pack Weight Unit Of Measure (WPUUOMHF) shall either both be blank or both have entries.

(e)Unit Pack Size Unit Of Measure (SPUUOMHF) and Unit Size Unit Of Measure (SUUUOMHA) in Table HA shall be the same.

(f)Unit Pack Weight Unit Of Measure (WPUUOMHF) and Unit Weight Unit Of Measure (WUUUOMHA) in Table HA shall be the same.

(g)Category 1 Container CAGE and Reference Number (CCMCAGHF and CCMREFHF) migrate from Table HA as non-identifying data elements.

(h)If Service Packaging Instruction Sheet Number (SPISNOHF) is blank then Service Packaging Instruction Sheet Revision Status (SPIREVHF) and SPIS Date (SPSDATHF) shall not have entries.

NOTE: If Standard Package Quantity (SPQNTYHF), Unit Pack Weight (UNPKWTHF), Unit Pack Size (LENUPKHF, WIDUPKHF, DEPUPKHF), Special Storage (SPLSTRHF) or Container NSN (CONNSNHF) have entries, Reason For Selection (DED 668) from Table HK should not be ‘0’.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
DEGPROHF	ITEM DEGREE OF PROTECTION CODE	1	A	F	-	074	K
UCLEVLHF	UNIT CONTAINER LEVEL	1	A	F	-	487
MEPRESHF	METHOD OF PRESERVATION CODE	2	X	F	-	239
PRSMATHF	PRESERVATION MATERIAL CODE	2	X	F	-	295
QTYUPKHF	QUANTITY PER UNIT PACK	3	X	-	-	321
PKGMRKHF	PACKAGE MARKING CODE	5	X	L	-	661
UNPKWTHF	UNIT PACK WEIGHT	5	X	-	-	495
WPUUOMHF	UNIT PACK WEIGHT UOM	2	A	F	-	491
LENUPKHF	UNIT PACK LENGTH	4	N	R	1	494
WIDUPKHF	UNIT PACK WIDTH	4	N	R	1	494
DEPUPKHF	UNIT PACK DEPTH	4	N	R	1	494
SPUUOMHF	UNIT PACK SIZE UOM	2	A	F	-	491
UNPKCUHF	UNIT PACK CUBE	7	N	R	3	493
SPISNOHF	SERVICE PACKAGING INSTRUCTION SHEET (SPIS)	16	X	L	-	680
	NUMBER
SPIREVHF	SERVICE PACKAGING INSTRUCTION SHEET (SPIS)	1	N	F	-	397
	REVISION STATUS
SPSDATHF	SPIS DATE	8	N	F	-	071
CONNSNHF	CONTAINER NSN	13	X	F	-	253
SUPPKDHF	SUPPLEMENTAL PACKAGING DATA	59	X	L	-	409
CCMCAGHF	CATEGORY 1 CONTAINER MANUFACTURER CAGE CODE	5	X	F	-	046
CCMREFHF	CATEGORY 1 CONTAINER REFERENCE NUMBER	32	X	L	-	337
SPLSTRHF	SPECIAL STORAGE (AECMA 2000M TEI STR)	1	N	-	-	686

C-92

	DEF STAN 00-60 (PART 0)/3
	ANNEX C (CONTINUED)
PRCPSCHF	PROCEDURAL PACKAGING SPECIFICATION CODE	2	A	F	-	817
TEISPQHF	STANDARD PACKAGE QUANTITY (AECMA 2000M TEI	4	N	R	-	818
	SPQ)
UNICONHF	UNIT CONTAINER CODE	2	X	F	-	486

C.12.7 Table HG, Part Application Provisioning. This Table contains parts related information to the part in a specific hardware application. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB) and LCN Type (LCNTYPXB). For a given row of information, the following cross-element edits apply to Table HG :

(a)LCN Type shall always be ‘P’ (Physical).

(b)Maintenance Action Code (MAIACTHG) is not allowed without Maximum Allowable Operating Time (MAOTIMHG).

(c)Maintenance Task Distribution subfields (OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG, DMTDDDHG, CBDMTDHG, and CADMTDHG) shall always total 100 percent.

(d)Replacement Task Distribution subfields (ORTDOOHG, FRTDFFHG, HRTDHHHG, LRTDLLHG, and DRTDDDHG) shall always total 100 percent.

(e)PCCN (PCCNUMXC) and Provisioning List Item Sequence Number (PLISN) (PLISNOHG) combinations shall be unique across all rows of information (PLISNs are mapped to respective PCCNs in Table XC through Table HO).

(f)Same as PLISN (SAPLISHG) shall be contained in this Table as a PLISN (PLISNOHG) having an identical PCCN. The same as PLISN shall be the lowest (EBCDIC value) PLISN in the Table for the same Reference Number, CAGE and PCCN combinations (without an associated ‘D’ TOCC).

(g)Repair Cycle Time (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, DRCTDDHG and CONRCTHG) for each Operations/Maintenance (O/M) Level (identified by the first position of the role name) shall be either blank or greater for each higher O/M level.

(h)When numeric, the Quantity Per End Item (QTYPEIHG) shall be greater than or equal to the Quantity Per Assembly (QTYASYHG).

(i)Maintenance Task Distribution and Replacement Task Distribution.

(1)OMTDOOHG shall be less than or equal to ORTDOOHG.

(2)OMTDOOHG and FMTDFFHG shall be less than or equal to ORTDOOHG and FMTDFFHG.

C-93

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(3)OMTDOOHG, FMTDFFHG, and HMTDHHHG shall be less than or equal to ORTDOOHG, FRTDFFHG, and HRTDHHHG.

(4)OMTDOOHG, FMTDFFHG, HMTDHHHG, and LMTDLLHG shall be less than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, and LRTDLLHG.

(5)OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG, and DMTDDDHG shall be less than or equal to ORTDOOHG, FRTDFFHG, HRTDHHHG, LRTDLLHG, and DRTDDDHG.

(j)Maintenance Task Distribution and Repair Cycle Time (RCT). When OMTDOOHG, FMTDFFHG, HMTDHHHG, LMTDLLHG and DMTDDDHG have an entry, then the corresponding RCT O/M subfield (identified by the first position of the role name) shall also have an entry (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, and DRCTDDHG).

(k)An Allowance Item Quantity (ALIQTYHG) cannot be entered without an Allowance Item Code (ALLOWCHG).

(l)When the Source, Maintenance, and Recoverability (SMR) (SMRCODHG) source code is ‘PC’, the Shelf Life (SHLIFEHA) in Table HA cannot be ‘O’.

(m)If the SMR (SMRCODHG) Source Code is ‘PB’, then the Essentiality Code (ESSCODHG) cannot be ‘3’.

(n)If LRU (LRUNITHG) is ‘Y’, then Essentiality Code (ESSCODHG) cannot be ‘3’.

(o)If the Special Maintenance Item Code (SMAINCHA) from Table HA is ‘B’, and if RCT has entries, then there shall be an entry in the contractor RCT (CONRCTHG). If CONRCTHG is entered, then SMAINCHA can only be ‘B’.

(p)Maintenance Replacement Rate (MRR) I shall be calculated based on the Task Frequency (Table CA) and the Quantity per Task (Table CI). A change in any of these variables shall result in an update of the MRRI.

(q)Subject ID CAGE Code (SIDCAGHG), Subject ID Reference Number (SIDREFHG), Subject ID NSN (SIDNSNHG) shall all be blank or all have entries.

(r)If Essentiality Code (ESSCODHG) and Total Life (TOTLIFHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’.

(s)If the 4th character of Source, Maintenance And Recoverability Code (SMRCODHG) is ‘D’ and Maintenance Task Distribution (OMTDOOHG, FMTDFFHG, HMTDHHHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’.

(t)If Maintenance Task Distribution (CBDMTDHG, CADMTDHG) and Repair Cycle Time (RCT) (ORCTOOHG, FRCTFFHG, HRCTHHHG, LRCTLLHG, DRCTDDHG,

C-94

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

CONRCTHG) have entries then Reason For Selection (REAFOSHK) from Table HK shall not be ‘0’ and Spare Parts Classification (DED 684) from Table HA shall be ‘2’ or ‘6’.

NOTE: When entering Attaching Storage Or Shipping Part (ATSOSPHG), attention should be given to Item Category Code (ITMCATHG) so that the two data elements are not contradictory.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X	L	-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
PLISNOHG	PROVISIONING LIST ITEM SEQUENCE NUMBER	5	X	L	-	309
QTYASYHG	QUANTITY PER ASSEMBLY (QTY/ASSY)	4	X	-	-	316
DATASCHG	DATA STATUS CODE	1	A	F	-	070
LLIPTDHG	LONG LEAD TIME ITEMS LIST (PROVISIONING	1	A	F	-	313
	TECHNICAL DOCUMENTATION
	SELECTION CODE (PTD))
PPLPTDHG	PROVISIONING PARTS LIST (PTD)	1	A	F	-	313
SFPPTDHG	SHORT FORM PROVISIONING PARTS LIST (PTD)	1	A	F	-	313
CBLPTDHG	COMMON AND BULK ITEMS LIST (PTD)	1	A	F	-	313
RILPTDHG	REPAIRABLE ITEMS LIST (PTD)	1	A	F	-	313
ISLPTDHG	INTERIM SUPPORT ITEMS LIST (PTD)	1	A	F	-	313
PCLPTDHG	POST CONFERENCE LIST (PTD)	1	A	F	-	313
TTLPTDHG	TOOL AND TEST EQUIPMENT LIST (PTD)	1	A	F	-	313
SCPPTDHG	SYSTEM CONFIGURATION PROVISIONING PARTS LIST	1	A	F	-	313
	(PTD)
ARAPTDHG	AS REQUIRED LIST A (PTD)	1	A	F	-	313
ARBPTDHG	AS REQUIRED LIST B (PTD)	1	A	F	-	313
TOCCODHG	TYPE OF CHANGE CODE (TOCC)	1	A	F	-	481
INDCODHG	INDENTURE CODE	1	X	F	-	162
QTYPEIHG	QUANTITY PER END ITEM	5	X	-	-	317
PIPLISHG	PRIOR ITEM PROVISIONING LIST ITEM SEQUENCE	5	X	L	-	297
	NUMBER (PRIOR ITEM PLISN)
SAPLISHG	SAME AS PROVISIONING LIST ITEM SEQUENCING	5	X	L	-	364
	NUMBER (SAME AS PLISN)
HARDCIHG	HARDNESS CRITICAL ITEM	1	A	F	-	151
REMIPIHG	REMAIN IN PLACE INDICATOR	1	A	F	-	348
LRUNITHG	LINE REPLACEABLE UNIT (LRU)	1	A	F	-	194
ITMCATHG	ITEM CATEGORY CODE (ICC)	2	X	L	-	177
ESSCODHG	ESSENTIALITY CODE	1	N	F	-	100
SMRCODHG	SOURCE, MAINTENANCE AND RECOVERABILITY CODE	6	X	L	-	389
MRRONEHG	MAINTENANCE REPLACEMENT RATE I (MRRI)	8	N	R	4	211
MRRTWOHG	MAINTENANCE REPLACEMENT RATE II (MRRII)	8	N	R	3	212
MRRMODHG	MAINTENANCE REPLACEMENT RATE MODIFIER	7	X	F	-	213
ORTDOOHG	FIRST LINE REPLACEMENT TASK DISTRIBUTION (RTD)	3	N	R	-	355
FRTDFFHG	SECOND LINE/SECOND LINE CLOSE SUPPORT RTD	3	N	R	-	355
HRTDHHHG	SECOND LINE REGIONAL/STATIC, /SECOND LINE	3	N	R	-	355
	GENERAL SUPPORT/EMBARKED SECOND LINE RTD
LRTDLLHG	SPECIAL REPAIR ACTIVITY RTD	3	N	R	-	355

C-95

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

DRTDDDHG	THIRD LINE/FOURTH LINE RTD	3	N	R	-	355
MAOTIMHG	MAXIMUM ALLOWABLE OPERATING TIME (MAOT)	4	X	-	-	221
MAIACTHG	MAINTENANCE ACTION CODE (MAC)	1	A	F	-	206
RISSBUHG	RECOMMENDED INITIAL SYSTEM STOCK BUY	3	N	R	-	328
RMSSLIHG	RECOMMENDED MINIMUM SYSTEM STOCK LEVEL	3	N	R	-	329
TOTQTYHG	TOTAL QUANTITY RECOMMENDED	6	N	R	-	453
OMTDOOHG	FIRST LINE MAINTENANCE TASK DISTRIBUTION (MTD)	2	N	R	-	214
FMTDFFHG	SECOND LINE/SECOND LINE CLOSE SUPPORT/SECOND	2	N	R	-	214
	LINE GENERAL SUPPORT MTD
HMTDHHHG	SECOND LINE REGIONAL/STATIC, EMBARKED SECOND	2	N	R	-	214
	LINE/GENERAL SUPPORT MTD
LMTDLLHG	SPECIALIZED REPAIR ACTIVITY MTD	2	N	R	-	214
DMTDDDHG	THIRD LINE/FOURTH LINE MTD	2	N	R	-	214
CBDMTDHG	CONDEMNED BELOW THIRD/FOURTH LINE MTD	2	N	R	-	214
CADMTDHG	CONDEMNED AT THIRD/FOURTH LINE MTD	2	N	R	-	214
ORCTOOHG	FIRST LINE REPAIR CYCLE TIME (RCT)	3	N	R	-	350
FRCTFFHG	SECOND LINE/SECOND LINE CLOSE SUPPORT/ RCT	3	N	R	-	350
HRCTHHHG	SECOND LINE REGIONAL/STATIC, SECOND LINE	3	N	R	-	350
	GENERAL SUPPORT/EMBARKED SECOND LINE RCT
LRCTLLHG	SPECIAL REPAIR ACTIVITY RCT	3	N	R	-	350
DRCTDDHG	THIRD LINE/FOURTH LINE RCT	3	N	R	-	350
CONRCTHG	CONTRACTOR RCT	3	N	R	-	350
NORETSHG	NOT REPAIRABLE THIS STATION	3	N	R	-	261
REPSURHG	REPAIR SURVIVAL RATE (RSR)	3	N	R	-	351
DRPONEHG	DRP ONE	6	X	L	-	081
DRPTWOHG	DRP TWO	6	X	L	-	081
WRKUCDHG	WORK UNIT CODE	7	X	L	-	516
ALLOWCHG	ALLOWANCE ITEM CODE	2	X	F	-	017
ALIQTYHG	ALLOWANCE ITEM QUANTITY	3	N	R	-	018
ALLOWSHG	ALLOWANCES	9	N	R	-	605
ATSOSPHG	ATTACHING, STORAGE, OR SHIPPING PART (AECMA	1	N	F	-	619
	2000M TEI ASP)
SIDCAGHG	SUBJECT ID CAGE CODE	5	X	F	-	046
SIDREFHG	SUBJECT ID REFERENCE NUMBER	32	X	L	-	337
SIDNSNHG	SUBJECT ID NSN	13	X	F	-	253
RECMQYHG	CSN RECOMMENDED MAINTENANCE QUANTITY	5	N	R	-	669
	(AECMA 2000M TEI RMQ)
RECORQHG	CSN RECOMMENDED OVERHAUL REPAIR QUANTITY	5	N	R	-	670
	(AECMA 2000M TEI ROQ)
SOMFRGHG	SELECT OR MANUFACTURE FROM RANGE (AECMA	40	X	L	-	679
	2000M TEI MFM)
SUPCATHG	SUPPLY CATEGORY	2	X	L	-	688
VFICODHG	VITAL FEATURES ITEM (VFI) CODE	1	A	F	-	710
TOTLIFHG	TOTAL LIFE (AECMA 2000M TEI TLF)	3	N	R	-	699
PREIICHG	PRE-ISSUE INSPECTION CODE	12	X	L	-	663
PREISTHG	PRE-ISSUE TEST	1	A	-	-	664
SOMFIDHG	SELECT OR MANUFACTURE FROM IDENTIFIER (AECMA	1	A	-	-	678
	2000M TEI SMF)
TURNRSHG	TURN ROUND SPARE	1	A	F	-	703
EQTSERHG	EQUIPMENT USING SERVICE DESIGNATOR CODE	6	A	F	-	835
IDENTNHG	IDENTIFICATION NUMBER	19	X	L	-	825
SDAUTHHG	SOFTWARE DESIGN AUTHORITY	25	X	L	-	808

C.12.8 Table HH, Overhaul-Kit Next Higher Assembly PLISN. This Table contains all Next Higher Assembly (NHA), kit or overhaul PLISNs, any associated NHA PLISN Indicators, and

C-96

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

Overhaul Replacement Rates. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN type (LCNTYPXB) and NHA PLISN (NHAPLIHH). NHA PLISN shall be a PLISN contained in Table XC (PLISNOXC) or Table HG (PLISNOHG) with an identical PCCN (PCCNUMXC). For a given row of information, the following cross-element edit applies to Table HH :

(a) If Spare Parts Classification (DED 684) in Table HA is ‘1’ then Overhaul Replacement Rate (OVHREPHH) shall not be blank.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
NHAPLIHH	NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM	5	X	L	-	258	K
	SEQUENCE NUMBER (NHA
	PLISN)
NHAINDHH	NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM	1	X	F	-	259
	SEQUENCE NUMBER INDICATOR
OVHREPHH	OVERHAUL REPLACEMENT RATE	3	N R		2	281

C.12.9 Table HI, Provisioning Remark. This Table contains text remarks associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), Provisioning Narrative Code (PRVNACHI) and Provisioning Text Sequencing Code (TEXSEQHI).

The Provisioning Narrative Codes (DED 667) correspond to the different types of narrative. The following list gives each of these codes, related narrative title, and DED number to refer to for an understanding of the information that needs to be input :

CODE	NARRATIVE TITLE	DED NUMBER
A	Provisioning Remarks	311
B	Similar To, Same As, Derived From	682
	and Fitted To
C	Provisioning Special Requirements	685

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F

C-97

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

PRVNACHI	PROVISIONING NARRATIVE CODE	1	A	F	-	667	K
TEXSEQHI	PROVISIONING TSC	5	N	R	-	450	K
PRVNARHI	PROVISIONING NARRATIVE	65	X	-	-	---

C.12.10 Table HJ, Provisioning Reference Designation. This Table contains Reference Designations associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), and, Reference Designation (REFDESHJ). Non-identifying keys, Technical Manual (TM) Code (TMCODEXI), Figure Number (FIGNUMHK) and Item Number (ITEMNOHK) migrate from Table HK, if applicable, on matching foreign keys.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
REFDESHJ	REFERENCE DESIGNATION	64	X	L	-	335	K
RDCODEHJ	REFERENCE DESIGNATION CODE	1	A	F	-	336
TMCODEXI	TECHNICAL MANUAL CODE (TM CODE)	3	X	F	-	437
FIGNUMHK	FIGURE NUMBER	4	X	R	-	144
ITEMNOHK	ITEM NUMBER	4	X	R	-	184

C.12.11 Table HK, Parts Manual Description. This Table contains Repair Parts Manual data associated with a part application for provisioning. Table keys include: CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), TM Code (TMCODEXI), Figure Number (FIGNUMHK), and Item Number (ITEMNOHK). For a given row of information, the following cross-element edits apply to Table HK :

(a)Initial Provisioning Project Number migrates from Table HU, as non-identifying data.

(b)Document Code (WIBBLEXB) Table XB shall be established for the same LCN entry (LSACONXB) in Table XB prior to Item Sequence Number (ITSNSNHK and ITSNVNHK) being established in this Table.

(c)If Refer To (TEIRTXHK) is entered ISN (ITSNSNHK and ITSNVNHK) shall not be blank.

NOTE: Total Quantity Per Location (TEITQLHK) should equate to Quantity Per Assembly (QTYASYHG) from Table HG if ‘option 2’ is used.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F

C-98

	DEF STAN 00-60 (PART 0)/3
	ANNEX C (CONTINUED)
EIACODXA	END ITEM ACRONYM CODE	10	X	L	-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
TMCODEXI	TECHNICAL MANUAL CODE (TM CODE)	3	X	F	-	437	F
FIGNUMHK	FIGURE NUMBER	4	X	R	-	144	K
ITEMNOHK	ITEM NUMBER	4	X	R	-	184	K
TMFGCDHK	TM FUNCTIONAL GROUP CODE (REPAIR PARTS	11	X	L	-	438
	MANUAL)
TMINDCHK	TECHNICAL MANUAL INDENTURE CODE (TM IND)	1	N	F	-	439
QTYFIGHK	QUANTITY PER FIGURE	3	N	R	-	318
TMCHGNHK	TECHNICAL MANUAL CHANGE NUMBER (TM CHG)	2	N	R	-	436
TEINILHK	NOT ILLUSTRATED (AECMA 2000M TEI NIL)	1	X	-	-	659
IPPNUMHK	ITEM INITIAL PROVISIONING PROJECT NUMBER	9	X	-	-	644
ITSNSNHK	ITEM SEQUENCE NUMBER (ISN) - NUMERIC SEQUENCE	2	N	F	-	647
	NUMBER
ITSNVNHK	ISN - VARIANT NUMBER	1	X	-	-	647
INDCODHK	FIGURE INDENTURE CODE	1	X	F	-	162
TEITQLHK	TOTAL QUANTITY PER LOCATION (AECMA 2000M TEI	5	X	R	-	700
	TQL)
TEIRTXHK	REFER TO (AECMA 2000M TEI RTX)	16	X	L	-	671
UOCEQPHK	USABLE ON CODE EQUIPMENT (AECMA 2000M TEI UCE)	8	X	-	-	708
UOCASYHK	USABLE ON CODE ASSEMBLY (AECMA 2000M TEI UCA)	6	X	-	-	707
INTERCHK	INTERCHANGEABILITY	2	X	-	-	645
CTIITNHK	CATEGORY 1 CONTAINER LOCATION ITEM NUMBER	4	X	R	-	184
CTIISNHK	CATEGORY 1 CONTAINER LOCATION ISN	2	N	F	-	647
CTIISVHK	CATEGORY 1 CONTAINER LOCATION ISN - VARIANT	1	X	-	-	647
	NUMBER
REAFOSHK	REASON FOR SELECTION (AECMA 2000M TEI RFS)	1	N	-	-	668

C.12.12 Table HL, Parts Manual Provisioning Nomenclature. This Table contains text for repair parts manual data associated with a part application for provisioning. Table keys are CAGE (CAGECDXH), Reference number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), TM Code (TMCODEXI), Figure Number (FIGNUMHK), Item Number (ITEMNOHK) and Parts Manual Text Sequencing Code (TEXSEQHL). For a given row of information, the following cross-element edit applies to Table HL :

(a) If IPPN Subject (TEIIPSHG) is entered in Table HG, for the first Text Sequencing Code (TEXSEQHL) in any record for matching values of CAGECDXH, REFNUMHA, EIACODXA, LSACONXB, ALTLCNXB and LCNTYPXB in Table HG, the first 19 characters of narrative shall match the IPPN Subject (TEIIPSHG).

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F

C-99

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

TMCODEXI	TECHNICAL MANUAL CODE (TM CODE)	3	X	F	-	437	F
FIGNUMHK	FIGURE NUMBER	4	X	R	-	144	F
ITEMNOHK	ITEM NUMBER	4	X	R	-	184	F
TEXSEQHL	PARTS MANUAL TSC	5	N	R	-	450	K
PROVNOHL	PROVISIONING NOMENCLATURE	65	X	-	-	310

C.12.13 Table HM, Item Basis of Issue. This Table contains part manual (tool list) Basis Of Issue (BOI) information. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA) and BOI Control (BOICTRHM). For a given row of information, the following cross-element edits apply to Table HM :

(a)Either BOI-Level (LVLBOIHM) or BOI-End Item (RATIOBHM) shall be entered to establish a row of information in this Table. When one of these is entered, the other shall be blank. Each LVLBOIHM and RATIOBHM value shall be a unique value for a given Reference Number and CAGE combination.

(b)A PLCC (DDPLCCHA) entry shall be contained in Table HA, and an entry in Table HK for the item Reference Number and CAGE combination shall occur prior to an entry in this Table.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
BOICTRHM	BASIS OF ISSUE CONTROL	1	N	F	-	030	K
QTYBOIHM	BASIS OF ISSUE QUANTITY	5	N	R	-	030	M
RATIOBHM	BASIS OF ISSUE END ITEM	8	X	L	-	030
LVLBOIHM	BASIS OF ISSUE LEVEL	1	A	F	-	030

C.12.14 Table HN, Provisioning Serial Number Usable On Code. This Table relates a part application to the applicable System/EI Serial Number (S/N) and S/N UOC associated with the part application. Please refer to Table XD. Table keys include all columns. Table keys CAGECDHN, REFNUMHN, LSACONHN, and ALTLCNHN migrate from Table HG.

Table keys LCNSEIHN, ALCSEIHN, FRSNUMHN, and TOSNUMHN migrate from Table XD. EIACODXA and LCNTYPXB are identical in both Tables XD and HG.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
CAGECDHN	S/N PROVISIONING CAGE CODE	5	X	F	-	046	F
REFNUMHN	S/N PROVISIONING REFERENCE NUMBER	32	X	L	-	337	F
LSACONHN	S/N PROVISIONING LSA CONTROL NUMBER (LCN)	18	X	L	-	199	F
ALTLCNHN	S/N PROVISIONING ALTERNATE LCN CODE (ALC)	2	N	F	-	019	F
LCNSEIHN	S/N PROVISIONING SYSTEM/EI LCN	18	X	L	-	199	F
ALCSEIHN	S/N PROVISIONING SYSTEM/EI ALC	2	N	F	-	019	F
FRSNUMHN	S/N PROVISIONING SERIAL NUMBER FROM	10	X	L	-	373	F
TOSNUMHN	S/N PROVISIONING SERIAL NUMBER TO	10	X	L	-	373	F

C.12.15 Table HO, Provisioning System/End Item Usable On Code. This Table relates a part application to the applicable System/EI UOCs and Provisioning Contract Control Number

C-100

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(PCCN) associated with the part application. Table keys include all columns. Table keys CAGECDHO, REFNUMHO, LSACONHO, and ALTLCNHO migrate from Table HG. Table keys LCNSEIHO and ALCSEIHO migrate from Table XC, from which UOCs and the PCCN are extracted. EIACODXA and LCNTYPXB are identical in both Tables XC and HG.

NOTE: Part application LCNs (LSACONHO) are mapped to their respective system/end items by matching on EIAC, LCN Type, LCN, and ALC between Tables HO and XC to extract applicable UOCs and the PCCN. A part application can have multiple UOCs, but it can have only one PCCN.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
CAGECDHO	UOC PROVISIONING CAGE CODE	5	X	F	-	046	F
REFNUMHO	UOC PROVISIONING REFERENCE NUMBER	32	X	L	-	337	F
LSACONHO	UOC PROVISIONING LSA CONTROL NUMBER (LCN)	18	X	L	-	199	F
ALTLCNHO	UOC PROVISIONING ALTERNATE LCN CODE (ALC)	2	N	F	-	019	F
LCNSEIHO	UOC PROVISIONING SYSTEM/EI LCN	18	X	L	-	199	F
ALCSEIHO	UOC PROVISIONING SYSTEM/EI ALC	2	N	F	-	019	F

C.12.16 Table HP, Design Change Information. This Table contains information about the parts application item affected by a design change. Table keys are CAGE (CAGECDXH), Reference Number (REFNUMHA), EIAC (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), and Change Authority Number (CANUMBHP). For a given row of information, the following cross-element edits apply to Table HP :

(a)Replaced or Superseding PLISN (RSPLISHP) shall be established in either Table HG or XC matching the PCCN of the HP Table keys (less CANUMBHO). A Replaced or Superseded PLISN Indicator (RSPINDHP) cannot be entered without a Replaced or Superseded PLISN (RSPLISHP).

(b)Quantity Procured (QTYPROHP) shall be entered if there is an entry in Quantity Transported (QTYSHPHP). The QTYPROHP shall be greater than or equal to the QTYSHPHP.

(c)Principal Features List Code (PFLCODHP), if required, shall either be set to ‘MAJICYP’ or ‘MAJICYF’ (refer to Principal Features List data element definition).

(d)If Interchangeability Code (INTERCHP) is entered, Reason For Selection (DED 668) in Table HK shall not be ‘0’.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F

C-101

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

LCNTYPXB	LCN TYPE	1	A	F	-	203	F
CANUMBHP	CHANGE AUTHORITY NUMBER	15	X L		-	043	K
RSPLISHP	REPLACED OR SUPERSEDING PROVISIONING LIST ITEM	5	X	L	-	353
	SEQUENCE NUMBER
RSPINDHP	REPLACED OR SUPERSEDING PROVISIONING LIST ITEM	1	A	F	-	354
	SEQUENCE NUMBER INDICATOR
QTYSHPHP	QUANTITY TRANSPORTED	6	N	R	-	323
QTYPROHP	QUANTITY PROCURED	6	N	R	-	322
INTCHCHP	INTERCHANGEABILITY CODE	2	A	F	-	172
PFLCODHP	PRINCIPAL FEATURES LIST (PFL) CODE	10	X	L	-	665
CESAAWHP	CHANGE EFFECT (CE) - ALARMS AND WARNINGS	1	A	F	-	624
CESMCRHP	CE ELECTRICAL INTERFACES - MAIN CABLE RUNS	1	A	F	-	624
CESPOCHP	CE ELECTRICAL INTERFACES - POSITION CABLE	1	A	F	-	624
CESCNDHP	CE ELECTRICAL INTERFACES - CONNECTION DETAILS	1	A	F	-	624
CESCTXHP	CE COMPASS TRANSMISSION	1	A	F	-	624
CESCHWHP	CE CHILLED WATER	1	A	F	-	624
CESELPHP	CE ELECTRICAL POWER	1	A	F	-	624
CESENVHP	CE ENVIRONMENTAL REQUIREMENTS	1	A	F	-	624
CESHLAHP	CE HP/LP AIR	1	A	F	-	624
CESHYDHP	CE HYDRAULICS	1	A	F	-	624
CESUKAHP	CE UPKEEP, KEEP ALIVE MAINTENANCE	1	A	F	-	624
CESSTDHP	CE SEATING DETAILS	1	A	F	-	624
CESSIGHP	CE SIGNALS	1	A	F	-	624
CESSPSHP	CE SITING PARAMETERS	1	A	F	-	624
CESVENHP	CE VENTILATION	1	A	F	-	624
CESSPCHP	CE SPACE REQUIREMENTS	1	A	F	-	624
CESWEQHP	CE WEAPON EQUIPMENT	1	A F		-	624
CESEOEHP	CE EFFECT ON ENVIRONMENT	1	A	F	-	624
TEIIAIHP	ILLUSTRATION AFFECTED INDICATOR (AECMA 2000M	1	A	F	-	643
	TEI IAI)

C.12.17 Table HQ, Serial Number Effectivity. This Table contains the serial number effectivity ranges which are affected by the design change. Table keys include all columns.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
CANUMBHP	CHANGE AUTHORITY NUMBER	15	X L		-	043	F
FMSRNOHQ	SERIAL NUMBER EFFECTIVITY FROM	10	X	L	-	374	K
TOSRNOHQ	SERIAL NUMBER EFFECTIVITY TO	10	X	L	-	374	K

C.12.18 Table HR, Design Change Usable On Code. This Table references to the UOC affected by a design change. Table keys include all columns. Design change UOC is extracted from Table XC through Table HO for the key of UOC System/EI (LCNSEIHO and ALCSEIHO) and UOC provisioning LCN/ALC (LSACONHO and ALTLCNHO). REFNUMHO, CAGECDHO, LSACONHO and ALTLCNHO shall be identical with REFNUMHA, CAGECDXH, LSACONXB and ALTLCNXB from Table HP migrating

C-102

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

CANUMBHP into this Table. EIACODXA and LCNTYPXB shall be identical in Tables XC, HO, and HR.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
EIACODXA	END ITEM ACRONYM CODE	10	X L		-	096	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
CAGECDHO	UOC PROVISIONING CAGE CODE	5	X	F	-	046	F
REFNUMHO	UOC PROVISIONING REFERENCE NUMBER	32	X	L	-	337	F
LSACONHO	UOC PROVISIONING LSA CONTROL NUMBER (LCN)	18	X	L	-	199	F
ALTLCNHO	UOC PROVISIONING ALTERNATE LCN CODE (ALC)	2	N	F	-	019	F
LCNSEIHO	UOC PROVISIONING SYSTEM/EI LCN	18	X	L	-	199	F
ALCSEIHO	UOC PROVISIONING SYSTEM/EI ALC	2	N	F	-	019	F
CANUMBHP	CHANGE AUTHORITY NUMBER	15	X L		-	043	F

C.12.19 Table HS, Crisis Resupply from Industry Procedure. This Table consolidates the data required for Crisis Resupply from Industry Procedure (CRIP) and can be set up for a primary item of supply or an alternative item of supply. Table keys are CRIP CAGE Code (CRPCAGHS), CRIP Reference Number (CRPREFHS), End Item Acronym Code (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB) and CRIP Item Contract Number (ITECONHS). For a given row of information, the following cross-element edits apply to Table HS :

(a)CRIP CAGE (CRPCAGHS) shall either be the same as CAGECDXH from Table HA or ADCAGEHB from Table HB.

(b)CRIP Reference Number (CRPREFHS) shall be the same as REFNUMHA from Table HA or ADDREFHB from Table HB.

(c)CRIP CAGE (CRPCAGHS) and CRIP Reference Number (CRPREFHS) shall both originate in the same Table ie HA or HB.

(d)Reference Number (REFNUMHA) shall have an associated RNCC of ‘3’ or ‘2’ and RNVC of ‘2’.

(e)Additional Reference Number (ADDREFHB) shall have an associated RNCC of ‘5’, ‘3’ or ‘2’ and RNVC of ‘2’.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CRPCAGHS	CRIP CAGE CODE	5	X	F	-	046	F
CRPREFHS	CRIP REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X	L	-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
ITECONHS	CRIP ITEM CONTRACT NUMBER	19	X	L	-	055	K
ACCPRNHS	ACCELERATED PRODUCTION NOTICE	2	N	R	-	601
ACCPRSHS	ACCELERATED PRODUCTION SCHEDULE	120	N	-	-	602

C-103

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

EPBCONHS	EXPANDED PRODUCTION BARRIERS (EPB) CODE -	1	N	F	-	639
	CONVERSION
EPBEQPHS	EPB CODE - EQUIPMENT	1	N	F	-	639
EPBFACHS	EPB CODE - FACILITIES	1	N	F	-	639
EPBINVHS	EPB CODE - INVENTORY	1	N	F	-	639
EPBLABHS	EPB CODE - LABOUR	1	N	F	-	639
EPBENVHS	EPB CODE - ENVIRONMENTAL	1	N	F	-	639
EPBREGHS	EPB CODE - REGULATORY	1	N	F	-	639
EPBSPEHS	EPB CODE - SPECIFICATIONS AND STANDARDS	1	N	F	-	639
EPBOTHHS	EPB CODE - OTHER	1	N	F	-	639
MULCOIHS	MULTIPLE CONTRACTS INDICATOR	1	A	F	-	656
REPRECHS	REPAIR/REBUILD CAPACITY	1	A	F	-	675
SHAPRIHS	SHARED PRODUCTION INDICATOR	1	A	F	-	681

C.12.20 Table HT, CRIP Equipment Production Remarks. This Table contains narrative information relating to equipment production required for Crisis Resupply from Industry Procedure (CRIP). Table keys are CRIP CAGE Code (CRPCAGHS), CRIP Reference Number (CRPREFHS), End Item Acronym Code (EIACODXA), LCN (LSACONXB), ALC (ALTLCNXB), LCN Type (LCNTYPXB), CRIP Item Contract Number (ITECONHS), and Equipment Production Remarks Text Sequencing Code (TEXSEQHS).

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
CRPCAGHS	CRIP CAGE CODE	5	X	F	-	046	F
CRPREFHS	CRIP REFERENCE NUMBER	32	X	L	-	337	F
EIACODXA	END ITEM ACRONYM CODE	10	X	L	-	096	F
LSACONXB	LOGISTIC SUPPORT ANALYSIS CONTROL NUMBER	18	X	L	-	199	F
	(LCN)
ALTLCNXB	ALTERNATE LCN CODE	2	N	F	-	019	F
LCNTYPXB	LCN TYPE	1	A	F	-	203	F
ITECONHS	CRIP ITEM CONTRACT NUMBER	19	X	L	-	055	F
TEXSEQHT	EQUIPMENT PRODUCTION REMARKS TSC	5	N	R	-	450	K
EQUPRRHT	EQUIPMENT PRODUCTION REMARKS	65	X	-	-	638

C.12.21 Table HU, Initial Provisioning Project and Variants. This Table contains data used to produce segments IPH and VAS of an AECMA S2000M Catalogue Sequence Number Orientated Initial Provisioning Data (CSNIPD) message. The table key is Initial Provisioning Project Number (IPPNUMHU). For a given row of information, the following cross-element edits apply to Table HU:

(a)IP SUBJECT CAGE 1 CODE (IPCAG1HU) and IP SUBJECT 1 REFERENCE NUMBER (IPREF1HU) migrate from Table HA keys as non-identifying data.

(b)IP SUBJECT CAGE 2 CODE (IPCAG2HU) and IP SUBJECT 2 REFERENCE NUMBER (IPREF2HU) migrate from Table HA keys as non-identifying data.

(c)IP SUBJECT CAGE 3 CODE (IPCAG3HU) and IP SUBJECT 3 REFERENCE NUMBER (IPREF3HU) migrate from Table HA keys as non-identifying data.

C-104

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

(d)IP SUBJECT CAGE 4 CODE (IPCAG4HU) and IP SUBJECT 4 REFERENCE NUMBER (IPREF4HU) migrate from Table HA keys as non-identifying data.

(e)IP SUBJECT CAGE 5 CODE (IPCAG5HU) and IP SUBJECT 5 REFERENCE NUMBER (IPREF5HU) migrate from Table HA keys as non-identifying data.

(f)IP SUBJECT CAGE 6 CODE (IPCAG6HU) and IP SUBJECT 6 REFERENCE NUMBER (IPREF6HU) migrate from Table HA keys as non-identifying data.

(g)IP SUBJECT CAGE 7 CODE (IPCAG7HU) and IP SUBJECT 7 REFERENCE NUMBER (IPREF7HU) migrate from Table HA keys as non-identifying data.

(h)IP SUBJECT CAGE 8 CODE (IPCAG8HU) and IP SUBJECT 8 REFERENCE NUMBER (IPREF8HU) migrate from Table HA keys as non-identifying data.

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT				DED	KEY
IPPNUMHU	INITIAL PROVISIONING PROJECT NUMBER (AECMA	9	X	-	-	644	K
	2000M TEI IPP)
MODLIDHU	MODEL IDENTIFICATION (AECMA 2000M TEI MOI)	2	X	-	-	654
TEIIPSHU	IPPN SUBJECT (AECMA 2000M TEI IPS)	19	X	L	-	805
FILEIDHU	FILE IDENTIFIER	1	A	F	-	834
IPCAG1HU	IP SUBJECT 1 CAGE CODE	5	X	F	-	046
IPREF1HU	IP SUBJECT 1 REFERENCE NUMBER	32	X	L	-	337
IPCAG2HU	IP SUBJECT 2 CAGE CODE	5	X	F	-	046
IPREF2HU	IP SUBJECT 2 REFERENCE NUMBER	32	X	L	-	337
IPCAG3HU	IP SUBJECT 3 CAGE CODE	5	X	F	-	046
IPREF3HU	IP SUBJECT 3 REFERENCE NUMBER	32	X	L	-	337
IPCAG4HU	IP SUBJECT 4 CAGE CODE	5	X	F	-	046
IPREF4HU	IP SUBJECT 4 REFERENCE NUMBER	32	X	L	-	337
IPCAG5HU	IP SUBJECT 5 CAGE CODE	5	X	F	-	046
IPREF5HU	IP SUBJECT 5 REFERENCE NUMBER	32	X	L	-	337
IPCAG6HU	IP SUBJECT 6 CAGE CODE	5	X	F	-	046
IPREF6HU	IP SUBJECT 6 REFERENCE NUMBER	32	X	L	-	337
IPCAG7HU	IP SUBJECT 7 CAGE CODE	5	X	F	-	046
IPREF7HU	IP SUBJECT 7 REFERENCE NUMBER	32	X	L	-	337
IPCAG8HU	IP SUBJECT 8 CAGE CODE	5	X	F	-	046
IPREF8HU	IP SUBJECT 8 REFERENCE NUMBER	32	X	L	-	337

C.12.22 Table HV, Initial Provisioning Project Spares Quantities. This Table contains data used to produce segment PIS of an AECMA S2000M CSNIPD message. It also provides a list of parts contained in group 2 of a CSNIPD or parts contained in a Part Number Orientated Initial Provisioning Data (PNOIPD) message. The table keys are Initial Provisioning Project Number (IPPNUMHU) from Table HU, CAGE Code (CAGECDXH) and Reference Number (REFNUMHA) from Table HA, Service Designator Code (EQTSERHV) and User Nation Code (TEIUSRHV).

CODE	DATA ELEMENT TITLE/ROLE NAME	FORMAT	DED	KEY
IPPNUMHU	INITIAL PROVISIONING PROJECT NUMBER (AECMA	9 X - -	644	F
	2000M TEI IPP)

C-105

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

CAGECDXH	CAGE CODE	5	X	F	-	046	F
REFNUMHA	REFERENCE NUMBER	32	X	L	-	337	F
IPDSERHV	INITIAL PROVISIONING SERVICE DESIGNATOR CODE	1	A	F	-	376	K
TEIUSRHV	USER (NATION) CODE (AECMA 2000M TEI USR)	3	X	F	-	829	K
QTYPEIHV	PROVISIONAL QUANTITY PER END ITEM	5	X	-	-	317
RECMQYHV	PART NUMBER RECOMMENDED MAINTENANCE	5	N	R	-	669
	QUANTITY
RECORQHV	PART NUMBER RECOMMENDED OVERHAUL REPAIR	5	N	R	-	670
	QUANTITY

C-106

DEF STAN 00-60 (PART 0)/3

ANNEX C (CONTINUED)

C.13 Transportability Engineering Analysis

Data Tables beginning with ‘J’ in the first position of the Table Code are structured to capture the information pertaining to the transportability modes and to the transported end item. In the event that the end item is sectionalized for transportation, the information shall be completed for each section of the end item. Figure 15 depicts the relational hierarchy of these Tables/entities.

TABLE CODE	TABLE TITLE
JA	Transportation
JB	Transportation Mode
JC	Transported End Item
JD	Transported End Item Narrative
JE	Transport by Fiscal Year
JF	Transportation Narrative

C-107

<<< < Предыдущая 5 6 7 8 9 10 11 12 13 14 15 1617 / 4717 18 19 20 21 22 23 24 25 26 27 28 29 > Следующая >>>

Соседние файлы в папке DEF STAN 00-60

#
29.03.20154.37 Mб6000000300.pdf
#
29.03.2015161.81 Кб3801000200.pdf
#
29.03.2015451.85 Кб5102000300.pdf
#
29.03.2015263.88 Кб3603000200.pdf
#
29.03.20151.13 Mб4310000300.pdf
#
29.03.2015222.25 Кб4011000300.pdf